On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 13OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-1297, the docket of AD 2024-17-08. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a5987c7cfc62b722e31078159ff8c5550372c80f5461639df9250954b6e5eba3' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a5987c7cfc62b722e31078159ff8c5550372c80f5461639df9250954b6e5eba3' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC225-62A016 Civil version(s): LP
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE MAIN ROTOR - Main Rotor Mast Inspection of the upper stop fixation screws and cover plate For the attention of Revision No. Date of issue Revision 0 2022-05-23 Revision 1 2023-02-28 Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that:
- The screws of the Main Rotor Mast (MRM) upper stop are the correct ones.
- The MRM cover plate is flat.
- There is no water inside the Main Gear Box (MGB).
Reason for last Revision:
Since Revision O of this ALERT SERVICE BULLETIN, Airbus Helicopters internal process has been modified and inspection process of MRM have been updated to make sure that both cover plate and upper stop screws installation are correct.
This new process has been deployed in Airbus Helicopters on May, 23rd 2022 This date has been anticipated in the EASA AD No. 2022-0104 issued on June 9th 2022.
The purpose of Revision 1 is to align this ALERT SERVICE BULLETIN effectivity with the EASA AD No. 2022-0104.
Therefore, helicopter EC225 version LP with a MRM all P/N manufactured or overhauled after May, 23rd 2022 are not concerned by this ALERT SERVICE BULLETIN.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-05-23 Page 1/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters EC225 version LP fitted with a MRM all P/N manufactured or overhauled before May, 23rd 2022.
NOTE 1 Helicopters EC225 version LP with a MRM all P/N manufactured or overhauled after May, 23rd 2022 are not concerned by the compliance of this ALERT SERVICE BULLETIN.
1.A.2. Non-installed equipment or parts MRM all P/N manufactured or overhauled before May, 23rd 2022.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Revision 0:
Airbus Helicopters was informed of one case of significant presence of water in the MGB oil.
A detailed inspection of the MGB showed corrosion on the MRM and inside the MGB.
The origin of the water inside the MGB is the result of the deformation of the cover plate installed on the top of the MRM.
It has also been discovered on another MRM, some upper stop screws damaged.
The degradation of the screws is due to a wrong screw reference installation.
The main difference being the length of the screw 30mm (1.181 in) instead of 36 mm (1.417 in).
Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that:
- The screws of the MRM upper stop are the correct ones.
- The MRM cover plate is flat.
- There is no water inside the MGB.
Revision 0 2022-05-23 Page 2/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016 Revision 1:
Since Revision 0 of this ALERT SERVICE BULLETIN, Airbus Helicopters internal process has been modified and inspection process of MRM have been updated to make sure that both cover plate and upper stop screws installation are correct.
This new process has been deployed in Airbus Helicopters on May, 23rd 2022.
This date has been anticipated in the EASA AD No. 2022-0104 issued on June 9th 2022.
The purpose of Revision 1 is to align this ALERT SERVICE BULLETIN effectivity with the EASA AD No. 2022-0104.
Therefore, Helicopters EC225 version LP with a MRM all PIN manufactured or overhauled after May, 23rd 2022 are not concerned by this ALERT SERVICE BULLETIN.
Revision 1 has no effect on the application of the former revisions of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION The ALERT SERVICE BULLETIN includes the work steps that follow:
- Make sure that the screws of the MRM upper stop are the correct ones.
- And depends of the helicopter configuration:
. Make sure that the MRM cover plate is flat.
. Get a sample of MGB oil.
. Analyze the results.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
Revision 0 2022-05-23 Page 3/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
1.E.2. Compliance in service Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
Comply with paragraph 3. and Table No. 1 below:
Table No. 1 Time since the last drain of the MGB or the last removal Helicopter of the cover plate, whatever Action Compliance time configuration comes first at receipt of (the first limit you meet is applicable) revision 0 of this
ALERT SERVICE BULLETIN Not more than 55 flight hours or 1 Comply with month after you received revision 0 of All Not applicable paragraph 3.B.2.a. this ALERT SERVICE BULLETIN.
Not more than 55 flight hours or 1 Comply with month after you received revision 0 of paragraph 3.B.2.b. this
ALERT SERVICE BULLETIN More than 3 months Comply with 3 months after you received revision 0 Not more than 110 flight hours or
- Without Main paragraphs 3.B.2.c. of this ALERT SERVICE BULLETIN Rotor Hub (MRH) and 3.B.2.d.
de-icing system Or Not more than 55 flight hours or 1 (See NOTE 1).
- With de-icing blades anti paragraph 3.B.2.b. Comply with months after you received revision 0 of this ALERT SERVICE BULLETIN.
optional - MRH manifold Not more than 110 flight hours or (See NOTE 1). 3 months or less 3 months after you received revision 0 paragraphs 3.B.2.c. Comply with and 3.B.2.d. 3 months after the first compliance of of this ALERT SERVICE BULLETIN Repeat once, 110 flight hours or Then, the paragraph 3.B.2.d.
(See NOTE 2) NOTE 2 Helicopters that do not have MRH de-icing system have a Helicopters that have MRH de-icing system can deactivate it and replace the MRH manifold by the cover place.
Revision 0 2022-05-23 Page 4/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016 NOTE 3 Waiting the results, the flights can continue but not more compliance as defined the Table No. 1. It is recommended to anticipate the compliance of paragraphs 3.B.2.c. and 3.B.2.d. to respect the compliance time of this ALERT SERVICE BULLETIN.
Non-installed equipment or parts:
Before you install the MRM identified in paragraph 1.A.2. comply with paragraph 3.B.4.
1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.
The technical content of this document is approved under the prerogatives of the recognition of design capability ref. FRA21J-002-DGA for French Government helicopters.
1.G. MANPOWER
• Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:
Qualification: 1 Mechanical Technician The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: - 15 minutes to comply with paragraphs 3.B.2.a. and 3.B.2.b. (the time to replace the screws and/or the cover plate is not included).
- 15 minutes to comply with paragraph 3.B.2.c. (the time to analyze the oil sample is not included).
1.H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
Revision 0 2022-05-23 Page 5/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES Aircraft Maintenance Manual (MMA):
MMA: 30-60-00-051: Deactivation of the de-icing system - ROTOR DE ICER MMA: 30-60-00-052: Activation of the de-icing system - ROTOR DE ICER MMA: 60-00-00-641: Filling and Draining - ROTOR STANDARD PRACTICES MMA: 62-20-00-021: Removal - Main rotor mast - MAIN ROTOR MAST ASSEMBLY MMA: 62-20-00-421: Installation - Main rotor mast - MAIN ROTOR MAST ASSEMBLY MMA: 62-21-00-062: Coning Stop Removal-Installation - MAIN ROTOR HUB Standard Practices Manual (MTC):
MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-02-601: Spectrometric analysis of lubricating oils used in mechanical assemblies - Monitoring of lubricating oils and hydraulic fluids MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2022-05-23 Page 6/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.
Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:
Key Word Qty New P/N Item P/N → Instruction Cover plate 1 332A31-3288-20 1 332A31-3288-20 Replace if necessary Screw ALD 22232BC100036L 2 Replace if necessary Consumables to be ordered separately:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Revision 0 2022-05-23 Page 7/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016 Special tools:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN and the list that follows:
Key Word Qty Tool P/N or equivalent Item Rule Commercial P/N ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2022-05-23 Page 8/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL Not applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Install the access equipment.
- Remove and/or open all applicable cowlings, panels, doors and other equipment items to get access to the different work areas.
3.B.2. Procedure
3.B.2.a. Inspection of the screws of the MRM upper stop (Figure 4) Make sure that "BC" is written on each head of the 10 screws (b) of the upper stop (c):
- If "BC" is written on the heads screws of the upper stop (c):
. No more action is necessary.
- If "BC" is not written on the heads screws of the upper stop (c):
. Replace one by one the related screws (b) of the upper stop (c) with the screw(s) (2).
Refer to the principle of the Task 62-21-00-062 (MMA).
3.B.2.b. Check of the flatness of the MRM cover plate Make sure that the cover plate (a) is flat. Use the rule (zz) on two angles with an angle of 90 degrees (Figure 1 and Figure 4, Detail A):
• ZZ Figure 1 Revision 0 2022-05-23 Page 9/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
- If the cover plate (a) is flat (you cannot see a space) between the rule (zz) and the cover plate (a) (Figure 2):
_ ZZ Figure 2 . Comply with paragraph with 3.B.3.
. Comply with 3.B.2.c. and 3.B.2.d. in the compliance time(s) showed with 1.E.2.
- If the cover plate is not flat (you can see a space) between the rule (zz) and the cover plate (a) (Figure 3):
- a Figure 3
• Stop the flights.
. Remove and discard the cover plate (a). Refer to the principle of Task 30-60-00-052 (MMA).
. Install a flat cover plate (1). Refer to the principle of Task 30-60-00-051 (MMA).
. Comply with paragraphs 3.B.2.c. and 3.B.2.d.
. Drain the MGB. Refer to Task 60-00-00-641 (MMA).
• Write to Airbus Helicopters, to do a detailed inspection of the MGB at the address that follow:
https://airbusworld.helicopters.airbus.com . Remove the MRM. Refer to Task 62-20-00-021 (MMA).
Revision 0 2022-05-23 Page 10/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
• During the detailed inspection:
.. If the MGB is declared as airworthy:
- Fill the MGB with oil. Refer to Task 60-00-00-641 (MMA).
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
.. If the MGB is declared as not airworthy:
- Replace the MGB and send it to an approved D-Level center for repair.
- Install an airworthy MGB.
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
3.B.2.c. Sample of MGB oil
- Get a sample of MGB oil. Refer to Work Card 20-08-02-601 (MTC).
- Send the oil sample to an Airbus Helicopters approved laboratory for an analysis of the water content.
3.B.2.d. Analysis of the results
- If there is 1000 pm of water or more in the oil sample:
. Stop the flights.
. Drain the MGB. Refer to Task 60-00-00-641 (MMA).
• Write to Airbus Helicopters, to do a detailed inspection of the MGB at the address that follow:
https://airbusworld.helicopters.airbus.com . Remove the MRM. Refer to Task 62-20-00-021 (MMA).
• During the detailed inspection:
.. If the MGB is declared as airworthy:
- Fill the MGB with oil. Refer to Task 60-00-00-641 (MMA).
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
.. If the MGB is declared as not airworthy:
- Replace the MGB and send it to an approved D-Level center for repair.
- Install an airworthy MGB.
- Install the MRM. Refer to Task 62-20-00-421 (MMA).
- Continue flights.
- If there is less than 1000 ppm of water in the oil sample:
. No more action is necessary.
3.B.3. Final steps
- Do an appearance check on the helicopter after an inspection or repair. Refer to Work Card 20-07-03-408 (MTC).
- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).
- Connect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
Revision 0 2022-05-23 Page 11/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-62A016
3.B.4. Work steps for non-installed equipment or parts
3.B.4.a. Inspection of the screws of the MRM upper stop (Figure 4) Make sure that "BC" is written on each head of the 10 screws (b) of the upper stop (c):
- If "BC" is written on the heads screws of the upper stop (c):
• If the cover plate (a) is installed, refer to paragraph 3.B.4.b.
. If the cover plate (a) is not installed, the MRM can be installed.
- If "BC" is not written on the heads screws of the upper stop (c):
. Replace one by one the related screws (b) of the upper stop (c) with the screw(s) (2).
Refer to the principle of the Task 62-21-00-062 (MMA).
• If the cover plate (a) is installed, refer to paragraph 3.B.4.b.
. If the cover plate (a) is not installed, the MRM can be installed.
3.B.4.b. Check of the flatness of the MRM cover plate Make sure that the cover plate (a) is flat. Use the rule (zz) on two angles with an angle of 90 degrees (Figure 1 and Figure 4, Detail A):
- If the cover plate (a) is flat (you cannot see a space) between the rules (zz) and the cover plate (a) (Figure 2):
. The MRM can be installed.
- If the cover plate is not flat (you can see a space) between the rule (zz) and the cover plate (a) (Figure 3):
. Remove and discard the cover plate (a). Refer to the principle of Task 30-60-00-052 (MMA).
. Install a flat cover plate (1). Refer to the principle of Task 30-60-00-051 (MMA).
• The MRM can be installed.
3.C. RECORD OF COMPLIANCE Compliance with this document:
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the Log Card (FM) of the MGB. Refer to Work Card 20-08-05-101 (MTC).
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link NOTE recording compliance
ALERT SERVICE BULLETINS SB Insight tool does not replace the recording in the helicopter documents.
ASB EC225 62A016
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2022-05-23 Page 12/13 Revision 1 2023-02-28 This document is available on the Internet: www.airbushelicopters.com/techpub/