Service bulletin · Eurocopter

On this page

Copies · 3

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 2Airbus Helicopters SB 63-032 Rev 2 · 50 pages · 3.0 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379, the docket of AD 2021-16-05. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0379 (document 0004) · AD 2021-16-05

Revision 1Airbus Helicopters SB 63-032 Rev 1 · 36 pages · 2.0 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379, the docket of AD 2021-16-05. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0379 (document 0004) · AD 2021-16-05

No revision namedAirbus Helicopters SB 63-032 Rev 0 · 27 pages · 2.3 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379, the docket of AD 2021-16-05. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0379 (document 0004) · AD 2021-16-05

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Service Bulletin
Number
EC225-63-032
Latest revision known
EC225-63-032, Revision 1

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

Text · 50Partly OCR

Revision 2, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0379, the docket of AD 2021-16-05. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '2c743745619c433a08a14c2aa2d59f28802c34ba3f51dc0dce2906c4914812bc'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 1/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

Civil version(s): LP

SERVICE BULLETIN

CORRECTIVE MEASURE

MAIN ROTOR DRIVE - MGB lubrication system

Addition of a magnetic plug between the MGB and the oil cooler Corresponds to modifications 0753047, 0753052 and 0753053

Revision No. Date of issue Revision 0 2017-06-23 Revision 1 2017-07-25 Revision 2 2018-11-14

Summary:

This Service Bulletin consists in adding a new magnetic plug called FFMP (Full Flow Magnetic Plug) between the MGB and the oil cooler and cancels the inspection of the oil filter and the oil cooler.

Reason for last Revision:

The purpose of Revision 2 of this Service Bulletin is to take into account customer remarks, modify symbols on Figures, correct tightening torques and improve the installation of the new FFMP magnetic plug (MOD 0753053).

Compliance:

Compliance with this Service Bulletin is conditioned by compliance with ALERT SERVICE BULLETIN No. 05A049.

For the attention of

SB No. EC225-63-032 Revision 0 2017-06-23 Page 2/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts

EC225 LP version helicopters which do not embody modification 0753053.

1.A.2. Non-installed equipment or parts

Not applicable.

1.B. ASSOCIATED REQUIREMENTS

Not applicable.

1.C. REASON

Revision 0:

Following investigations into the fatal accident of an EC225 LP helicopter, which occurred on April 29, 2016 in Norway, Airbus Helicopters introduced monitoring measures through ALERT SERVICE BULLETIN No. 05A049.

One of these measures is the inspection of the oil cooler which requires the oil cooler to be drained.

The purpose of this Service Bulletin is to add a new magnetic plug called FFMP (Full Flow Magnetic Plug) to collect particles upstream of the oil cooler.

This modification enables the check of the MGB oil filter and oil cooler to be canceled. It will be available in early July 2017 and requires a ground run to be carried out after the check of the magnetic plug.

A new optimized definition of the FFMP, which enables the ground run after the check to be canceled, is currently being developed and will be available as of mid-July.

The new magnetic plug must be inspected in acco rdance with the instructions of ALERT SERVICE BULLETIN No. 05A049.

Compliance with this Service Bulletin is conditioned by compliance with ALERT SERVICE BULLETIN No. 05A049.

Revision 1:

Revision 1 of this Service Bulletin consisted in introducing a new version of the FFMP (MOD 0753052), which enables the ground run after inspection to be canceled, and which can be easily locked by a safety pin.

Revision 1 affects compliance with the previous revision.

Revision 2:

The purpose of this Service Bulletin is to take into account customer remarks, modify symbols on Figures, correct tightening torques and improve the installation of the new FFMP magnetic plug (MOD 0753053).

The revision does not affect compliance with the previous revision.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 3/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1.D. DESCRIPTION

This Service Bulletin consists in (MOD 0753053):

- removing the walkway, if necessary,

- modifying the walkway to install the FFMP (Full Flow Magnetic Plug) manifold assembly support,

- replacing the hydraulic hose which connects the MGB to the oil cooler,

- installing a magnetic plug,

or modifying the installation made during compliance with the previous revisions.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level

Comply with the instructions given in paragraph 3. of this Service Bulletin according to the operational and contractual constraints.

1.E.2. Compliance in service

The work on the helicopter is to be performed by the operator.

Helicopters/installed equipment or parts:

For helicopters on which Revision 0 of this Service Bulletin was not complied with (PRE MOD 0753047):

Comply with paragraph 3., except for paragraph 3.B.2.d. of this Service Bulletin without exceeding the deadline imposed in ALERT SERVICE BULLETIN No. 05A049.

For helicopters on which Revision 0 of this Service Bulletin was complied with (POST MOD 0753047 and PRE MOD 0753052):

Comply with paragraph 3., except for paragraphs 3.B.2.a., 3.B.2.b. and 3.B.2.c. of this Service Bulletin without exceeding the deadline imposed in ALERT SERVICE BULLETIN No. 05A049.

For helicopters on which revision 1 of this Service Bulletin was complied with (POST MOD 0753047 and 0753052):

Depending on the customer’s decision on compliance, comply with paragraph 3. except for paragraphs 3.B.2.a., 3.B.2.b. and 3.B.2.c. of this Service Bulletin during a future inspection, as per operational constraints.

Non-installed equipment or parts:

Not applicable.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 4/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1.F. APPROVAL

Approval of modifications:

The information or instructions relate to modification 0753047, which was approved on June 23, 2017 by the EASA for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0753052, which was approved on June 30, 2017 by the EASA for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0753053 approved on January 19, 2018 by the EASA for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this Service Bulletin Revision 0 was approved on June 23, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this Service Bulletin Revision 0 was approved on June 23, 2017 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this Service Bulletin Revision 1 was approved on July 18, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this Service Bulletin Revision 1 was approved on July 18, 2017 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this Service Bulletin Revision 2 was approved on November 14, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this Service Bulletin Revision 2 was approved on November 14, 2018 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 5/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1.G. MANPOWER

For compliance with this Service Bulletin, Airbus Helicopters recommends the following personnel qualifications:

For helicopters on which Revision 0 of this Service Bulletin was not complied with:

Qualification: - 2 Mechanical Technicians,

- 1 Pilot.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations: - approximately 8 hours for the Mechanical Technician,

- approximately 15 minutes for the pilot.

Estimated helicopter downtime:

The estimated helicopter downtime is approximately 1 day.

For helicopters on which Revision 0 of this Service Bulletin was complied with:

Qualification: - 1 Mechanical Technician,

- 1 Pilot.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations: - approximately 30 minutes for the Mechanical Technician,

- approximately 15 minutes for the Pilot.

Estimated helicopter downtime:

The estimated helicopter downtime is approximately half a day.

For helicopters on which Revision 1 of this Service Bulletin was complied with:

Qualification: - 1 Mechanical Technician,

- 1 Pilot.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations: - approximately 30 minutes for the Mechanical Technician,

- approximately 15 minutes for the Pilot.

Estimated helicopter downtime:

The estimated helicopter downtime is approximately half a day.

1.H. WEIGHT AND BALANCE

After work completion, record weights and moments in Section 6.2 of the Flight Manual (PMV).

For helicopters on which Revision 0 of this Service Bulletin was not complied with:

Weight: + 1.37 kg.

Longitudinal moment: + 7.49 m.kg.

For helicopters on which Revision 0 of this Service Bulletin was complied with:

Weight and moment negligible.

For helicopters on which Revision 1 of this Service Bulletin was complied with:

Not applicable.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 6/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1.I. POWER CONSUMPTION

Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES

Not applicable.

1.K. REFERENCES

The documents required for compliance with this Service Bulletin are as follows.

Standard Practices Manual (MTC):

- MTC: 20.01.01.303: Use of protective products - Miscellaneous products used on helicopters

- MTC: 20.01.01.305: Use of hydraulic fluids - Miscellaneous products used on helicopters

- MTC: 20.02.01.103: Installation of pipes - General

- MTC: 20.02.01.418: Protection of electrical wiring during maintenance operations - General

- MTC: 20.02.05.404: Joining by bolts and nuts - Joining

- MTC: 20.02.06.101: Safetying assemblies: General - Safetying and locking assemblies

- MTC: 20.02.06.402: Safetying with lockwire - Safetying and locking assemblies

- MTC: 20.02.07.101: Electrical bonding: General - Electrical bonding

- MTC: 20.02.07.401: Bonding procedure - Electrical bonding

- MTC: 20.02.07.402: Bonding procedure applied on metal structure - Electrical bonding

- MTC: 20.02.07.403: Use of Vernelec 43022 varnish - Electrical bonding

- MTC: 20.02.08.410: Installation of seals on mechanical or hydraulic assemblies - Replacement of components on structure and mechanical assemblies

- MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning

- MTC: 20.04.03.409: Method for application of GARDACID P4325 - Corrosion inhibiting and removal procedures

- MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair - Technical instructions

- MTC: 20.08.01.601: Monitoring of lubricating oil contamination on mechanical assemblies equipped with magnetic plugs - Periodical monitoring of lubricating oil checking elements

- MTC: 20.08.05.103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft

Aircraft Maintenance Manual (MMA):

- MMA: 12-00-00, 00: Description - General

- MMA: 12-10-00, 00: Description - Filling and draining

- MMA: 24-00-00-611: General Instructions - General

- MMA: 53-73-00-021: Removal - Sliding cowling

- MMA: 53-73-00-421: Installation - Sliding cowling

- MMA: 60-00-00-641: Filling and draining

- MMA: 63-21-00-065: Removal-Installation of MGB Torquemeter Transmitter - Main reduction gear

SB No. EC225-63-032 Revision 0 2017-06-23 Page 7/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

1.L. OTHER AFFECTED PUBLICATIONS

The modification will be integrated into the following manuals:

- Illustrated Parts Catalog (IPC).

- Aircraft Maintenance Manual (MMA).

- Master Servicing Manual (MSM).

The documents affected will be updated as part of a future revision.

The update of the IPC documentation must be ordered by the customer.

1.M. PART INTERCHANGEABILITY OR MIXABILITY

Interchangeability:

PRE MOD and POST MOD parts are not interchangeable.

Mixability:

Not applicable.

SB No. EC225-63-032 Revision 0 2017-06-23 Page 8/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT

For helicopters PREMOD 0753047 and PRE MOD 0753052 (not having complied with revision 0) The kit and tooling (loft) will be delivered free of charge by the Airbus Helicopters' Program Department.

For helicopters POSTMOD 0753047 and/or 0753052 (having complied with revisions 0 and/or 1) The price of the kit will be given on the operator’s request, contact the Airbus Helicopters Sales and Customer Relations Department.

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE

NOTE 1

On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.

2.B. LOGISTIC INFORMATION

For any information concerning the modification kits and/or components or assistance, contact the Sales and Customer Relations Department.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT

Kits to be ordered for one helicopter or one assembly:

For helicopters PRE MOD 0753047 and PRE MOD 0753052 (not having complied with revision 0)

Designation Qty New P/N Item Former P/N → Instruction

Magnetic plug installation kit, including:

332A75-3052-0072

FFMP support base (eq) 1 332A39-1065-03 1 Formed support 2 332A39-1068-21 2 Screw 2 22126BC050016L 3 Screw 5 22208BC050018L 4 Special screw 10 ECS2365TK05S16X 5 Flexible hose, upstream (SENSOR Y) 1 A25490-01 (704A34412282) 7 A8225 (704A34412210) Discard Flexible h, downstream (SENSOR Y) 1 A25489-01 (704A34412281) 8 FFMP body 1 1D9317 (704A34412289) 9

SB No. EC225-63-032 Revision 0 2017-06-23 Page 9/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

Kits to be ordered for one helicopter or one assembly (continued):

Designation Qty New P/N Item Former P/N → Instruction

Magnetic plug installation kit, including (continued):

332A75-3052-0072

FFMP (magnetic plug) manifold 1 1A9339 (704A34412290) 10 Seal For ref. AS3208-16 10a Seal For ref. AS3209-019 10b Attachment clamp 12 EN4114S38NH0 11 Washer 9 23111CA050 13 Nut 9 ASN52320BH050N 14 Welded hose support 1 332A39-1063-02 15 Screw 2 22126BC080036L 16 Washer 7 23119AG050LE 17 Safety belt 1 332A39-1066-21 18 Attachment clamp 1 ASNA0021-21G43 19 Washer 5 23112AG050LE 21 Union 33 UNJ-M 1 332A39-1062-20 22 Union 33 UNJ-M 1 332A39-1062-21 23 O-ring 2 AS3209-122 24 Screw 2 22209BC050018L 25 Attachment clamp 2 EN4114S12NH0 26 Screw 3 22209BC050014L 27 Washer 2 332A39-1067-22 28 Screw 2 22208BC050026L 33 Attachment clamp 3 EN4114S23WH0 34 Spacer 2 332A39-1069-21 35 Screw 2 22208BC050014L 39

SB No. EC225-63-032 Revision 0 2017-06-23 Page 10/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

Kits to be ordered for one helicopter or one assembly (continued):

For helicopters POSTMOD 0753047 and/or 0753052 (having complied with revisions 0 and/or 1)

Designation Qty New P/N Item Former P/N → Instruction

Magnetic plug installation kit, including (continued):

332A75-3053-0071

FFMP support base (eq) 1 332A39-1065-03 1 332A39-1065-01 Discard Formed support 2 332A39-1068-21 2 332A39-1068-20 Discard Screw 2 22126BC050016L 3 Screw 5 22208BC050018L 4 Special screw 10 ECS2365TK05S16X 5 FFMP (magnetic plug) manifold 1 1A9339 (704A34412290) 10 1A9312 (704A34412283) Discard Seal PM AS3208-16 10a Seal PM AS3209-019 10b Attachment clamp 2 EN4114S38NH0 11 Washer 9 23111CA050 13 Nut 9 ASN52320BH050N 14 Welded hose support 1 332A39-1063-02 15 332A39-1063-01 Discard Screw 2 22126BC080036L 16 Washer 7 23119AG050LE 17 Safety belt 1 332A39-1066-21 18 332A39-1066-20 Discard Washer 5 23112AG050LE 21 Screw 2 22209BC050018L 25 Attachment clamp 1 EN4114S12NH0 26 Screw 3 22209BC050014L 27 Washer 2 332A39-1067-22 28 332A39-1067-21 Discard Screw 2 22208BC050026L 33 Spacer 2 332A39-1069-21 35 332A39-1069-20 Discard Screw 2 22208BC050014L 39

SB No. EC225-63-032 Revision 0 2017-06-23 Page 11/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

Equipment or parts to be ordered separately:

Designation Qty New P/N Item Former P/N → Instruction

Lockwire A/R EN3628-0,8 (CM776) 6

Attachment clamp 1 EN4114S38NH0 11 Helicopter with APU installation Screw 1 22208BC050020L 12 Helicopter with APU installation Washer 1 23111CA050 13 Helicopter with APU installation Nut 1 ASN52320BH050N 14 Helicopter with APU installation Heat-shrink sheath A/R VG95343T05F001M 29 Elastomer A/R ASNA3917E010 36 Attachment clamp 1 EN4113S20NH 37 Helicopter with APU installation Silicone tape A/R ABS5334A01B (CM6940) 38

NOTE 2

Components (11), (12), (13), (14) and (37) must only be ordered for helicopters with APU installation.

Consumables to be ordered separately:

Refer to the Work Cards and Tasks specified in this Service Bulletin and the list below:

Designation Qty Consumable P/N CM Item

Adhesive A/R DHS171-141.20 6014 20 Grease A/R AIR4206B 116 30 Mineral oil A/R AIR3525 / O-155 123 31 White spirit (cleaning agent) A/R Whitespiritbidon5L 208 32

The consumables can be ordered separately from company KLX AEROSPACE SOLUTIONS.

Website: https://www.klxaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888

SB No. EC225-63-032 Revision 0 2017-06-23 Page 12/50 Revision 2 2018-11-14 This document is available on the internet: www.airbushelicopters.com/techpub/

Special tools:

Refer to the Work Cards and Tasks specified in this Service Bulletin and the list below:

Designation Qty Tooling P/N or equivalent Item

Loft 1 332A39-1065-TG zz

NOTE 3

Loft (zz) must be systematic ally ordered and can only be used once on the helicopter.

2.D. EQUIPMENT OR PARTS TO BE RETURNED

Not applicable.