On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1056; AD 2020-16-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2009-1124; AD 2009-25-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Emergency Alert Service Bulletin
- Number
- 05.95
- Latest revision known
- 05.95, Revision 1, dated October 22, 2015
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 12Partly OCR
Revision 1, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1056; AD 2020-16-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1722fc1cec70e73f232e23f38990787fdf0988e4e4be48a9f1121ac4c502fa98' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1722fc1cec70e73f232e23f38990787fdf0988e4e4be48a9f1121ac4c502fa98' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Page 1/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
Airbus Helicopters
DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE
EMERGENCY
ALERT SERVICE BULLETIN
PUMA NUMBER VERSIONS SA330 05.95 Civil: J Military: Ba, L
SUBJECT: MAIN ROTOR DRIVE
Readjusting or checking the tightening torque load of the attachment hardware and checking the integrity of the Main Gear Box input flexible couplings
ATA: 65
REVISION No.
DATE OF APPROVAL
DATE OF ISSUE
Revision 0 On: March 03, 2008 2008.03.03
Revision 1 On: October 22, 2015 2015.10.22
Page 2/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters / Installed equipment
On MGB input flexible coupling/sliding and fixed flange assemblies POST MOD 0752416 and POST MOD 0752419 or POST MOD S712 (refer to the Log Card (FME) of the MGB and NOTE 1), except those assemblies which meet one of the following criteria:
- Which comply with MDE Work Card 65.32.601 or the equivalent military MAT 8582 Work Card 321X (see NOTE 2) since new or since the last General Overhaul of the MGB (see NOTE 3).
Or,
- Which equip an MGB which has undergone General Overhaul after 01/04/2015 and which have not been replaced since the General Overhaul of the MGB,
Or,
- Which equip an MGB and have been subjected to an intervention in a D level workshop after 01/04/2015.
1.A.2. Non-installed equipment
On MGB input flexible coupling/sliding and fixed flange assemblies POST MOD 0752416 and POST MOD 0752419 or POST MOD S712 (refer to the Log Card (FME) of the MGB and NOTE 1) fitted on MGBs which have undergone Complete Overhaul (RG) before 01/04/2015, and which have never undergone compliance with Maintenance Manual (MDE) Work Card 65.32.601 or the equivalent MAT 8582 military Work Card 321X (refer to NOTE 2) since new or Complete Overhaul of the MGB (refer to NOTE 3).
NOTE 1
MOD S 712 is the equivalent military modification for MOD 0752416 and MOD 0752419
NOTE 2
The Maintenance Manual (MDE) Work Card 65.32.601 or equivalent military MAT 8582 Work Card 321X defines the flexible coupling inspection and attachment hardware tightening torque application and is systematically applicable during the P2 inspection
NOTE 3
The flexible coupling is a component systematically replaced through the MGB complete overhaul.
The flying hours specified in this ALERT SERVICE BULLETIN therefore have to be considered:
- since the complete overhaul of the MGB if the flexible couplings or flexible coupling/sliding and fixed flanges assemblies have never been replaced on the MGB since last MGB complete overhaul, or
- since the installation on the MGB of a new flexible coupling or a new flexible coupling/sliding and fixed flanges assembly if such new installation occurred after the last MGB complete overhaul.
Page 3/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
Revision 0:
To readjust or to check the tightening torque load of the bolts attaching the flexible coupling to the sliding coupling flange and the bolts attaching the flexible coupling to the fixed coupling flange, in order to prevent any damage to the flexible couplings, which, over time, may lead to the loss of the coupling.
Revision 1:
The purpose of Revision 1 is to cancel the instructions of this ALERT SERVICE BULLETIN for the MGBs upon which a double check was carried out during the assembling of the flexible coupling/flange assemblies in level three maintenance.
1.D. DESCRIPTION
Revision 0:
During a ground run-up, the flight crew suddenly heard a noise and noticed vibrations coming from the main gear box (MGB) compartment along with a smell of burning.
The pilot then decided to shut down the engines without applying the rotor brake.
Examination of the helicopter carried out following the engine shutdown, revealed damage to the interface of the engine coupling tube with the LH MGB input, associated with the failure of the flexible coupling of this MGB input.
This is the first case of flexible coupling failure that has been reported since MOD 0752416 and MOD 0752419 or MOD S712 (see NOTE 1) were introduced.
The examinations carried out on the affected components have revealed a progressive fatigue failure of the coupling disks.
The failure starts from areas affected by extensive fretting on the faces and in the holes of the flexible coupling disks.
This occurrence of fretting is the result of loss of the tightening torque load or insufficient tightening of the bolts attaching the flexible coupling to the flanges.
To date, this occurrence of tightening torque load loss or insufficient tightening is identified only on the MGB input flexible coupling.
The cause of this loss of tightening torque load or insufficient tightening has not yet been established and EUROCOPTER is continuing the investigations and analyses.
Pending the results of these analyses and in order to reveal any deterioration of these couplings, which may lead to the loss of the drive of one or even both MGB inputs over time, EUROCOPTER renders compliance with the measures defined in this ALERT SERVICE BULLETIN mandatory.
Revision 1:
The analyses carried out by Airbus Helicopters revealed that the observed damage was due to insufficient tightening during the Overhaul/Repair activity.
For this reason, the assembling procedure has been modified in order to prevent this type of event.
This action enables compliance with this ALERT SERVICE BULLETIN to be canceled for MGB input flexible coupling/sliding and fixed flange assemblies described in paragraph 1.A.
Page 4/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
1.E. COMPLIANCE
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
1.E.1. Compliance at the works
1.E.1.a. On helicopters: Not applicable.
1.E.1.b. On non-installed equipment: Not applicable.
1.E.2. Compliance in operation: By the operator:
1.E.2.a. On helicopters / installed equipment:
For MGBs concerned by Paragraph 1.A.:
On receipt of this ALERT SERVICE BULLETIN, issued on March 03, 2008:
1) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged less than 50 flying hours since new or MGB complete overhaul (see NOTE 3):
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN when these assemblies have logged between 50 and 75 flying hours.
2) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged between 50 and 75 flying hours since new or MGB complete overhaul (see NOTE 3):
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN at the latest when these assemblies reach 75 flying hours, or comply with paragraph 2.B.2.b. at the latest when these assemblies reach 125 flying hours.
3) For MGB input flexible coupling/sliding and fi xed flanges assemblies which have logged more than 75 flying hours since new or MGB complete overhaul (see NOTE 3):
- comply with paragraph 2.B.2.b. of this ALERT SERVICE BULLETIN at the latest when these assemblies reach 50 flying hours following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page.
4) Each time a MGB input flexible coupling/sliding and fixed flanges assembly that has logged less than 50 flying hours since new or MGB complete overhaul (see NOTE 3), is installed:
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN when these assemblies have logged between 50 and 75 flying hours from the date on which they were put into service.
Page 5/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
1.E.2.b. On non-installed equipment:
1) For MGB input flexible coupling/sliding and fixed flanges assemblies which have logged between 50 and 75 flying hours since new or MGB complete overhaul (see NOTE 3):
- comply with paragraph 2.B.2.a. of this ALERT SERVICE BULLETIN before installation.
2) For MGB input flexible coupling/sliding and fi xed flanges assemblies which have logged more than 75 flying hours since new or MGB complete overhaul (see NOTE 3):
- comply with paragraph 2.B.2.b. of this ALERT SERVICE BULLETIN before installation.
1.F. APPROVAL
Approval is limited to civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 03, 2008 under the authority of EASA Design Organization Approval No. 21J.056.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 22, 2015 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 22, 2015 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 22, 2015 by the Airbus Helicopters Airworthiness Department for export military versions.
1.G. MANPOWER
Qualification: Mechanic.
Time for the operations: Approximately 8 hours to comply with paragraph 2.B.2.a.
Time for the operations: Approximately 10 hours to comply with paragraph 2.B.2.b.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT STATE
Not applicable.
Page 6/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
1.K. REFERENCES
Maintenance Manual (MDE) Work Cards: 65.32.411
65.32.408
65.32.601
71.00.401.
Or
MAT 8582, Work Cards: 702C 321P 321PH 321X
Standard Practices Manual (MTC) Work Card: 20.02.05.404.
1.L. OTHER DOCUMENTS CONCERNED
MAT 8582.
1.M. TOOLING CONCERNED
Not applicable.
1.N. INTERCHANGEABILITY AND MIXABILITY OF PARTS
Not applicable.
Page 7/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
2. ACCOMPLISHMENT INSTRUCTIONS
2.A. GENERAL
The operational procedure given in paragraph 2.B. is described for one side and must be applied to the RH and LH sides of the engine-to-MGB coupling.
2.B. OPERATIONAL PROCEDURE
2.B.1. Preliminary steps
- Install the equipment providing access to the MGB.
- Install the engine cowling walkways.
2.B.2.a. Readjusting the tightening torque load on the flexible coupling-to-flange attachment bolts.
As per Figure 1:
- Remove the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C.
- Remove coupling flange assembly (a) as per MD E Work Cards 65.32.411 and 65.32.408 or as per MAT 8582 Work Cards 321PH and 321P.
- Readjust the tightening torque load of the 6 nuts (b) to the tightening torque specified in MDE Work Card
65.32.411 or MAT 8582 Work Card 321PH and in accor dance with the procedure described in MTC Work Card 20.02.05.404. Refer also to Service Letter No. 1809- 00-06, the main technical instructions of which are reminded here-after:
Loosen sufficiently the assembly to allow m easurement of the locking torque of the nut.
Re-tighten to a tightening torque equal to the s pecified tightening torque plus the measured locking torque of the nut.
- Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work Card 321P.
- Install the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C.
- Return the helicopter to flight configuration in compliance with paragraph 2.B.3.
2.B.2.b. Checking the tightening torque load on the flexible coupling-to-flange attachment bolts.
NOTE 4
Should it be impossible to check t he tightening torque load of the nuts (tooling unavailable or other reasons ), apply the procedure described for case No. 2 in the “Interpretation of the results” chapter.
Page 8/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
As per Figure 1:
- Remove the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C.
- Remove coupling flange assembly (a) as per MD E Work Cards 65.32.411 and 65.32.408 or as per MAT 8582 Work Cards 321PH and 321P.
- Measure the tightening torque on the 6 nuts (b) in a ccordance with the procedure described in MTC Work Card 20.02.05.404. Refer also to Service Letter No. 1809- 00-06, the main technical instructions of which are reminded here-after:
. Identify the position of the nut relative to the assembly.
. Loosen sufficiently the assembly to allow measurement of the locking torque of the nut.
. Re-tighten using a torque wrench until the mark on t he nut is aligned with the mark on the assembly and note the torque applied for this operation.
. Then calculate the difference between this applied to rque and the locking torque of the nut; this is the effective tightening torque
- Identify the nuts (b) whose effective tightening torque is below 1.3 m.daN.
Interpretation of the results:
1) If the effective tightening torque of a ll nuts (b) is equal to or above 1.3 m.daN:
- Readjust the tightening torque load of the nut s (b) and apply the procedure described in paragraph
2.B.2.a.
2) If the effective tightening torque of at least one nut (b) is below 1.3 m.daN:
- Remove flexible coupling assembly (c) from coupling flange assembly (a) as per MDE Work Card
65.32.411 or MAT 8582 Work Card 321PH.
- Disassemble flexible coupling assembly (c) as per MDE Work Card 65.32.601 or MAT 8582 Work Card 321X and check all the coupling disks to make su re that there is no crack. Special attention must be given to the area around the holes.
. If there is no crack in any of the disks (f) of flexible coupling assembly (c):
- Leave as is.
- Install flexible coupling assembly (c) on coupling flange assembly (a) as per MDE Work Card
65.32.411 or MAT 8582 Work Card 321PH.
- Torque the nuts (b) to the tightening torque s pecified in MDE Work Card 65.32.411 or MAT 8582 Work Card 321PH and in accordance with the procedure described in MTC Work Card
20.02.05.404 (refer to Service Letter No. 1809-00-06).
- Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work Card 321P.
- Install the engine as per MDE Work Card 71.00.401 or MAT 8582 Work Card 702C.
- Return the helicopter to flight configuration in compliance with paragraph 2.B.3.
. If there are cracks in one or more disks (f ) of flexible coupling assembly (c):
- discard flexible coupling (c), bolts (d), washers (e) and nuts (b) before resuming flights.
Page 9/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
IF THERE IS A CRACK IN A FLEXIBLE COUPLING
(c) DISK (f), YOU MUST REPLACE ALL THE DISKS OF FLEXIBLE COUPLING ASSEMBLY (c), BOLTS
(d), WASHERS (e) AND NUTS (b).
- Contact the Airbus Helicopters Customer Service Technical Support Operation Department (STVM) by:
. Tel: +33 (0)4.42.85.99.67 . Fax: +33 (0)4.42.85.99.66
- Install a new flexible coupling assembly (c):
. Install the new flexible coupling assembly (c) on coupling flange assembly (a) as per MDE Work Card 65.32.411 or MAT 8582 Work Card 321PH.
. Torque tighten the nuts (b) to the tightening to rque specified in MDE Work Card 65.32.411 or MAT 8582 Work Card 321PH and in accordance with the procedure described in MTC Work Card 20.02.05.404 (refer to Service Letter No. 1809-00-06).
. Install coupling flange assembly (a) as per MDE Work Card 65.32.408 or MAT 8582 Work Card 321P.
. Install the engine as per MDE Work Ca rd 71.00.401 or MAT 8582 Work Card 702C.
. Return the helicopter to flight confi guration in compliance with paragraph 2.B.3.
2.B.3. Final steps
- Remove the engine cowling walkways.
- Remove the equipment providing access to the MGB.
- Resume flights.
2.C. IDENTIFICATION
Record compliance with this ALERT SERVICE BULLETIN in the log card of the Main Gear Box (MGB).
2.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
CAUTION
AIRBUS
HELICOPTERS Fixed coupling flange Sliding coupling flange Figure 1 Page 10/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
Page 11/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
3. MATERIAL INFORMATION
3.A. MATERIAL: COST - AVAILABILITY
3.A.1. Cost
For any information concerning kits and / or components, contact the Sales and Customer Relations Department of the Airbus Helicopters Network.
3.A.2. Availability
Kits and / or components will be delivered on customer’s order.
3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
3.C. MATERIAL REQUIRED FOR EACH HELICOPTER / ENGINE / COMPONENT
3.C.1. Kit(s) or component(s) to be ordered for one helicopter or one assembly
Material Part Number Qty Item Key Word Former Part Number Instructions
704A33698040 6 b Nut 330A32937401 1 c Flexible coupling assembly 330A32936435 6 d Bolt 330A32939228 12 e Washer
3.C.2. Products to be ordered separately
The products required for compliance with the Tasks and / or Work Cards listed in paragraph 1.K., can be ordered from the INTERTURBINE AVIATION LOGISTICS company.
Website: http://www.interturbine.com Telephone: +49.41.91.809.300 AOG: +49.41.91.809.444
Page 12/12 2015.10.22 This document is available on the internet: www.airbushelicopters.com/techpub
3.D. PROCUREMENT CONDITIONS
Order the required quantity (unless otherwise specified)
from
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE
NOTE 5
For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4 42 85 99 96
NOTE 6
On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.
4. APPENDIX
Not applicable.