Service bulletin · Eurocopter

Airbus Helicopters ASB SA330-65.137 Rev 0Airbus Helicopters ASB SA330-65.137 Rev 0 · 14 pages · 257 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2552, the docket of AD 2025-08-06. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2552 (document 0004) · AD 2025-08-06

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Service Bulletin
Number
65.137
Latest revision known
65.137, Revision R1, dated November 17, 1993

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 14OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2552, the docket of AD 2025-08-06. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '482efa1f57d24fe9adc27b116ccbf2bb5700999ae4c5b5368960b98fdd2fef3e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137 Civil version(s): J Military version(s): Ba, Jm, L, S1, Sm

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE ROTORS - Oil cooling Increased reliability of the fan-bearing assembly and the flexible duct Related to modifications 0725373, 0776102 and 0776104 For the attention of Revision No. Date of issue Revision 0 2022-07-25 Summary:

The objective of this ALERT SERVICE BULLETIN is to upgrade the fan-bearing assembly. This upgrade makes the fan-bearing rectifier stronger. You can only do this at a D-level maintenance center that is specially approved and has the correct equipment to do this upgrade. When you receive the upgraded fan-bearing assembly, you must install a flexible duct which is compatible with the upgraded fan-bearing assembly.

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Revision 0 2022-07-25 Page 1/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1. PLANNING INFORMATION

CAUTION

MAKE SURE THAT THE MODIFICATIONS

RELATED TO THIS ALERT SERVICE BULLETIN

AGREE WITH THE HELICOPTER CONFIGURATION AT THIS TIME. IF THE MODIFICATIONS DO NOT AGREE WITH THE HELICOPTER CONFIGURATION:

- PREPARE THE NECESSARY ADAPTATION

- GET THE APPROVAL BY THE APPLICABLE LOCAL AIR TRANSPORT AUTHORITIES.

- COMPLY AIRWORTHINESS REQUIREMENTS.

THIS ALERT SERVICE BULLETIN IS WRITTEN FOR

THE INITIAL HELICOPTER CONFIGURATION

SPECIFIED IN THE INDIVIDUAL INSPECTION LOG BOOK. IT INCLUDES ONLY THE POST-DELIVERY

CONFIGURATION CHANGES THAT ARE KNOWN AND APPROVED BY AIRBUS HELICOPTERS.

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters installed with the components that follow:

- Flexible duct manufacturer part number (MP/N): 330A39-2148-00

- Fan-bearing assembly with one of the MP/N that follow:

• 330A34-1190-04

• 330A34-1190-05 330A34-1190-06

• 330A34-1190-07.

NOTE 1 You can identify the equipment from its Log Card (FM).

NOTE 2 You can also upgrade the fan-bearing assemblies with the MP/N: 330A34-1190-00/-01/-02/-03. To do so, you first upgrade them with modification 0776101 through Service Bulletin No. 65.127. After the compliance with Service Bulletin No. 65.127, the MP/N of these fan-bearing assemblies become 330A34-1190-04/-05/-06/-07.

1.A.2. Non-installed equipment or parts Equipment shown in paragraph 1.A.1.

Revision 0 2022-07-25 Page 2/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Airbus Helicopters got to know some incidents of rupture of bearings and fan blades of the fan-bearing assembly. The Kevlar protection on the fan-bearing rectifier could not contain all the debris from this rupture.

Thus, Airbus Helicopters introduces modification 0776102 on the SA330 helicopter family through this ALERT SERVICE BULLETIN. In this modification, the initial PRE MOD Kevlar protection is removed. Then, the fan-bearing rectifier is made stronger with new layers of Kevlar protection.

Fan-bearing rectifier with Kevlar protection removed 15 Layer 2" Layer Fan-bearing rectifier POST MOD 0776102 Kevlar protection The modification 0776102 is integrated at a D-level maintenance center that is specially approved and has the correct equipment to do this upgrade. During this upgrade, the approved D-level maintenance center will systematically integrate modification 0725373 for PRE MOD 0725373 fan-bearing assemblies. The modification 0725373 installs an accelerometer support on the fan-bearing rectifier.

Conjointly, Airbus Helicopters introduces modification 0776104 which installs a new flexible duct. Only this flexible duct is compatible with the POST MOD 0776102 fan-bearing assembly and can contain ejected debris better.

The objective of this ALERT SERVICE BULLETIN is to install POST MOD 0776104 flexible duct and upgrade the fan-bearing assembly with modification 0776102, and if applicable, modification 0725373.

Revision 0 2022-07-25 Page 3/14 This document is available on the Internet: www.airbu elicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1.D. DESCRIPTION This ALERT SERVICE BULLETIN includes the work steps that follow:

- The removal of the flexible duct

- The removal of the fan-bearing assembly

- The shipment of the fan-bearing assembly to an approved D-level maintenance center to integrate the modification 0776102, and where applicable, the modification 0725373

- The installation of the fan-bearing assembly after the modification at the approved D-level maintenance

- The installation of the new flexible duct to integrate the modification 0776104.

NOTE 3 The modification 0725373 is only applicable to fan-bearing assemblies with MP/N: 330A34-1190-04 or 330A34-1190-

06. Fan-bearing assemblies with MP/N: 330A34-1190-05 and 330A34-1190-07 are POST MOD 0725373.

NOTE 4 Airbus Helicopters will introduce modification 0776103 through Service Bulletin No. 65.136. This modification increases the reliability of the attachment points between the fan grid and the rectifier of the fan-bearing assembly. Same as the modification 0776102, this modification 0776103 is integrated at an approved D-level maintenance center. If you comply with the Service Bulletin No. 65.136 and this ALERT SERVICE BULLETIN at the same time, you get the two compliances with only one shipment.

NOTE 5 The Service Bulletin No. 65.136 is not available at the date of issue of this ALERT SERVICE BULLETIN. Airbus Helicopters will make the Service Bulletin No. 65.136 available.

NOTE 6 After the integration of modification 0776102 through this ALERT SERVICE BULLETIN, the upgraded fan-bearing assembly has a new MP/N as identification:

- 330A34-1190-08 (for PRE MOD 0775028 assemblies)

- 330A34-1190-09 (for POST MOD 0775028 assemblies).

NOTE 7 Modification 0775028 installs a microswitch on each belt tensioner to give cockpit indication if the belt is broken.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

Revision 0 2022-07-25 Page 4/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1.E.2. Compliance in service It is the approved D-level maintenance center who does the modification of fan-bearing assembly.

It is the operator who does the removal and installation of the fan-bearing assembly and the flexible duct on the helicopter.

Helicopters/installed equipment or parts:

Comply with paragraph 3. before January 1, 2026.

Non-installed equipment or parts:

You must not install the equipment given in paragraph 1.A.2. on helicopters after December 31, 2025.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0725373 edition 2, which was approved on April 13, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0725373 edition 2, which was approved on April 13, 2012 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The information or instructions relate to modification 0725373 edition 2, which was approved on April 13, 2012 by the Airbus Helicopters Airworthiness Department for export military versions.

The information or instructions relate to modification 0776102, which was approved through CRD 330A 07-76102C Revision C on July 08, 2021 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0776102, which was approved through CRD 330A 07-76102M Revision B on July 08, 2021 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The information or instructions relate to modification 0776102, which was approved througn CRD 330А 07-76102M Revision B on July 08, 2021 by the Airbus Helicopters Airworthiness Department for export military versions (but this is not applicable to helicopter version Sm-LEP).

The information or instructions relate to modification 0776104, which was approved through CRD 330A 07-76104C Revision B on November 08, 2019 by EASA for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0776104, which was approved through CRD 330A 07-76104M Revision A on November 20, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The information or instructions relate to modification 0776104, which was approved through CRD 330A 07-76104M Revision A on November 20, 2019 by the Airbus Helicopters Airworthiness Department for export military versions (but this is not applicable to helicopter version Sm-LEP).

Revision 0 2022-07-25 Page 5/14 This document is available on the Internet: www. airbu elicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137 Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on July 22, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 22, 2022 under the authority of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 22, 2022 by the Airbus Helicopters Airworthiness Department for export military versions.

1.G. MANPOWER * Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:

Qualification: 1 Mechanical Technician.

The man-hours are an estimate given for information only and for a standard helicopter configuration.

Estimated Man-hours: 9 hours for the Mechanical Technician.

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is one and a half day (this does not include the time taken for the modification of the fan-bearing assembly at the approved D-level maintenance center).

1.H. WEIGHT AND BALANCE Helicopters installed with PRE MOD 0725373 fan-bearing assemblies before the compliance with this ALERT SERVICE BULLETIN:

Weight: +1.268 kg Longitudinal moment: +7.924 m.kg Helicopters installed with POST MOD 0725373 fan-bearing assemblies before the compliance with this ALERT SERVICE BULLETIN:

Weight: +1.250 kg Longitudinal moment: +7.814 m.kg After you complete the work, record the new weight and moment in your applicable document.

1.I. POWER CONSUMPTION This ALERT SERVICE BULLETIN has no effect on the electrical load analysis.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2022-07-25 Page 6/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1.K. REFERENCES All helicopters SIM: In effect SB: 65.127: New bearings of the fan bearing rotor These documents are necessary to comply with this ALERT SERVICE BULLETIN:

Helicopter version Ba MAT8582: 320A: Main gear box - General instructions MAT8582: 321PM: Main Rotor Transmission - Removal - Installation of the flexible duct MAT8582: 341E: Horizontal Drive Shaft - Removal - Installation of the "fan bearing-intermediate shaft" assembly Helicopter versions L, J, Jm, S1 and Sm MDE: 65-00-301: Rotors - General instructions MDE: 65-33-410: Cooling Unit - Removal-installation of the flexible duct MDE: 65-41-404: Horizontal Drive Shaft - Removal and installation of the "fan bearing - intermediate shaft" assembly All helicopter versions IN: 2832-1-00: Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical investigation/core unit return IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight SPN: 3703-P-00: Foreign Object Damage prevention MTC: 20-07-01-201: Handling of helicopters in a hangar and in a prepared area - Handling MTC: 20-07-02-212: Recommendations for working at height - Human factors approach - Safety instructions MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft MTC: 20-08-05-102: Rules in force applicable for repair and maintenance of aircraft - General rules applicable to aircraft MTC: 20-08-05-107: Recommendations for technical requests - General rules applicable to aircraft MTC: 20-09-02-901: Preservation and packing methods of airborne equipment - Preservation Revision 0 2022-07-25 Page 7/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

NECESSARY FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF THEY ARE

AVAILABLE, THE OPERATOR MUST

CONTACT AIRBUS HELICOPTERS TO GET THESE DOCUMENTS.

Publications already updated:

The manuals shown below are updated with the modifications 0725373, 0776102 and 0776104:

- Maintenance Manual (MDE / MAT8582)

- Master Servicing Recommendations (PRE)

- Airworthiness Limitations (PRE 5.99)

- Index of Modifications (SIM).

The Illustrated Parts Catalog (IPC) is updated with the modification 0725373.

You will receive the documents to which you subscribe.

Publications to be updated:

Airbus Helicopters will update the Illustrated Parts Catalog (IPC) in relation to the modifications 0776102 and 0776104.

You will receive the documents to which you subscribe.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

PRE MOD and POST MOD components are not interchangeable.

Mixability:

You must not use PRE MOD and POST MOD components together.

Revision 0 2022-07-25 Page 8/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead times.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2022-07-25 Page 9/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

New Old Key Word Qty Item P/N P/N → Instruction Flexible duct 1 330A39-2168-00 1 330A39-2148-00 Put into storage Equipment or parts to be ordered separately:

Refer to the Work Cards used in this ALERT SERVICE BULLETIN.

Consumables to be ordered separately:

Refer to the Work Cards used in this ALERT SERVICE BULLETIN.

You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering (IN 3481-1-00). If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to the Work Cards used in this ALERT SERVICE BULLETIN.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Use the procedure given in Information Notice (IN) No. 2832-1-00 to send the fan-bearing assembly back.

Revision 0 2022-07-25 Page 10/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

3. ACCOMPLISHMENT INSTRUCTIONS

3.А. GENERAL

- Comply with the instructions to move helicopters in a hangar and in a prepared area. Refer to Work Card 20-07-01-201 (MTC).

- Comply with the safety instructions for helicopters parked in a repair shop. Refer to Work Card 20-07-02-201 (MTC).

- Comply with the recommendations when you work at height. Refer to Work Card 20-07-02-212 (MTC).

- Comply with the rules in force applicable for repair and maintenance of aircraft. Refer to Work Card 20-08-05-102 (MTC).

- Comply with the recommendations for technical requests. Refer to Work Card 20-08-05-107 (MTC).

- Comply with the general instructions on rotors. Refer to Work Card 65-00-301 (MDE) or Work Card 320A (MAT8582) applicable to your helicopter version.

3.B. WORK STEPS In the procedures that follow, refer to the Work Cards (MDE) or the Work Cards (MAT8582) applicable to your helicopter version.

CAUTION

MAKE SURE THAT YOU PREVENT ALL POSSIBLE FOREIGN OBJECT DAMAGE (FOD). REFER TO SAFETY PROMOTION NOTICE (SPN) NO. 3703-P-

00.

3.B.1. Preliminary steps

- Park the helicopter in a maintenance hangar.

- Disconnect all electrical power sources.

- Install the applicable access means.

- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to the different work areas.

3.B.2. Procedure

3.B.2.a. Removal of PRE MOD fan-bearing assembly (Figure 1, DETAIL A)

- Remove the fan-bearing assembly (a). Refer to Work Card 65-41-404 (MDE) or Work Card 341E (MAT8582).

- Remove the flexible duct (b). Refer to Work Card 65-33-410 (MDE) or Work Card 321PM (MAT8582).

- Put the flexible duct (b) into storage. Refer to Work Card 20-09-02-901 (MTC).

- Send the fan-bearing assembly (a) to an approved D-level maintenance center to integrate the modification 0776102 and where applicable, modification 0725373. Refer to paragraph 2.D.

NOTE 1 Fan-bearing assemblies with MP/N: 330A34-1190-05 or 330A34-1190-07 are POST MOD 0725373.

Revision 0 2022-07-25 Page 11/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS No. SA330-65.137

3.B.2.b. Installation of POST MOD fan-bearing assembly (Figure 1, DETAIL A)

- When you receive the fan-bearing assembly (a), read its new Log Card (FM) and make sure that its MP/N is given in the list below:

. 330A34-1190-08

• 330A34-1190-09.

NOTE 2 If you integrate this modification 0776102 (through this ALERT SERVICE BULLETIN) and the modification 0776103 (through Service Bulletin No. 65.136) at the same time, the fan-bearing assembly will have one of the MP/N given below:

- 330A34-1190-10

- 330A34-1190-11.

NOTE 3 You can install a fan-bearing assembly with one of the MP/N given above (330A34-1190-08/-09/-10/-11) to complete the work steps of this ALERT SERVICE BULLETIN.

- Install the fan-bearing assembly (a). Refer to Work Card 65-41-404 (MDE) or Work Card 341E (MAT8582).

- Install the flexible duct (1). Refer to Work Card 65-33-410 (MDE) or Work Card 321PM (MAT8582).

3.B.3. Final steps

- Remove all the tools, the materials and the equipment from your work area.

- Clean the work area and the helicopter. Refer to Work Card 20-07-03-408 (MTC).

- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during the preliminary steps (paragraph 3.B.1 of this ALERT SERVICE BULLETIN).

- Remove the access means.

- Connect all the electrical power sources.

- Set the helicopter to flight condition.

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):

QR code or hypertext link NOTE 4 The recording of compliance with ALERT SERVICE BULLETINS in the SB Insight tool does not replace the recording in the helicopter documents.

ASB SA330 65.137 Revision 0 2022-07-25 Page 12/14 This document is available on the Internet: www.airbushelicopters.com/techpub/