Service bulletin · Eurocopter

No revision namedASB 67.08 · 8 pages · 979 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2009-0663; AD 2010-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2009-0663 (document 0004) · AD 2010-06-07

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Alert Service Bulletin
Number
67.08

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 8OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2009-0663; AD 2010-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '57a5afe02e5c361327cfe5b7acd1e2b95a9ab97daad06eecca0ef526ac9e866f'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

EUROCOPTER

DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE CIVIL VERSION(S): G1 MILITARY VERSION(S): GA

ALERT SERVICE BULLETIN No. 67.08 SUBJECT: ROTOR FLIGHT CONTROLS Return to conformity of main rotor servo-controls REVISION No. DATE OF APPROVAL DATE OF ISSUE Revision 0 On: February 19, 2007 2007.02.19 Approved under EASA DOA No. 21J.056. 67.08 Page 1/8 2007.02.19

Page 2OCROpen in PDF

neurocopter an EADS Company ALERT SERVICE BULLETIN SA366

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/Installed equipment Helicopters equipped with servo-controls, identified by their part numbers and serial numbers listed in the table below, and with no letter "R" marked in the inspection box of the servo-control identification plate.

Key Word Part Number: Serial Numbers Main rotor servo-control SC8033-2 1106 Main rotor servo-control SC8034-2 598, 599, 600 NOTE Servo-controls marked with a letter "R" in the "inspection stamp" box of the servo-control identification plate, have already been retured to conformity.

1.A.2. Non-installed equipment Servo-controls held as spares, identified by their part numbers and serial numbers listed in the table above, and with no letter "R" marked in the inspection box of the servo-control identification plate.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON To ensure conformity of the servo-controls identified in paragraph 1.A., with their definition.

This ALERT SERVICE BULLETIN will form the subject of an EASA Airworthiness Directive.

Approved under EASA DOA No. 21J.056. 67.08 Page 2/8 2007.02.19

Page 3OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

1.D. DESCRIPTION Following the assembly and delivery of servo-controls, the equipment manufacturer found that a batch of cap assemblies, P/No. 800137, had a non-conformity which could affect the retention of the distributor sleeve in its position.

In the event of a non-conformity and incorrect installation of the servo-control cap, the rotation of the distributor may not be stopped mechanically. In this case, only the friction of the seals holds the distributor sleeve in position. Tests carried out by the equipment manufacturer on new servo-controls and on servocontrols which have logged approximately 2,800 flying hours, have shown that the friction of the seals holds the distributor sleeve in position.

To prevent the risk of rotation of the distributor sleeve, which could lead to untimely movements of the servocontrol as far as one of its stops, EUROCOPTER renders the return of the non-compliant servo-controls mandatory, so that they can be returned to conformity.

1.E. COMPLIANCE EUROCOPTER renders compliance with this ALERT SERVICE BULLETIN, mandatory.

1.E.1. Compliance at the works Not applicable.

1.E.2. Compliance in operation: By the operator:

1.E.2.a. On helicopters/installed equipment:

Comply with paragraph 2. of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page, at the next repair or overhaul, without exceeding 2 years.

1.E.2.b. On non-installed equipment:

At the next repair or overhaul, without exceeding 2 years following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page, the servo-controls identified in the table in paragraph 1.A. must be returned to Goodrich so that they can be returned to conformity.

Goodrich Actuation Systems Département EADS Réparations 43 rue des Prés 27950 Saint Marcel - France Telephone: +33 2.32.64.70.43 Fax: +33 2.32.64.70.01

1.F. APPROVAL Approval is limited to civil version helicopters subject to an Airworthiness Certificate.

The technical information given in this ALERT SERVICE BULLETIN was approved on February 19, 2007 under the authority of EASA Design Organisation Approval No. 21J.056.

Approved under EASA DOA No. 21J.056. 67.08 Page 3/8 2007.02.19

Page 4OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

1.G. MANPOWER Qualification: 1 mechanic.

Time for the operations: Approximately 4 hours.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. EFFECT ON ELECTRICAL LOADS Not applicable.

1.J. SOFTWARE MODIFICATION EMBODIMENT STATE Not applicable.

1.K. REFERENCES Maintenance Manual (MET): Work Cards: 29.00.00.301 - 67.00.00.301 - 67.30.10.401.

1.L. OTHER DOCUMENTS CONCERNED Not applicable.

1.M. TOOLING CONCERNED Not applicable.

1.N. INTERCHANGEABILITY AND MIXABILITY OF PARTS Not applicable.

Approved under EASA DOA No. 21J.056. 67.08 Page 4/8 2007.02.19

Page 5OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

2. ACCOMPLISHMENT INSTRUCTIONS

2.A. GENERAL Refer to the general safety instructions concerning hydraulic power in accordance with MET Work Card 29.00.00.301.

Refer to the general instructions concerning the rotor controls in accordance with MET Work Card 67.00.00.301.

2.B. OPERATIONAL PROCEDURE

- Remove the servo-control in accordance with Work Card 67.30.10.401.

- Send the servo-control to:

Goodrich Actuation Systems Département EADS Réparations 43 rue des Prés 27950 Saint Marcel - France Telephone: +33 2.32.64.70.43 Fax: +33 2.32.64.70.01

- Install the conforming servo-control in accordance with Work Card 67.30.10.401.

2.C. IDENTIFICATION Record compliance with this ALERT SERVICE BULLETIN on the equipment log card (FME).

2.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Approved under EASA DOA No. 21J.056. 67.08 Page 5/8 2007.02.19

Page 6OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

3. MATERIAL INFORMATION

3.A. MATERIAL: COST - AVAILABILITY

3.A.1. Cost Non-conforming cap assemblies, P/No. 800137, will be replaced free of charge within 2 years following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page.

3.A.2. Availability Not applicable.

3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.

3.C. MATERIAL REQUIRED FOR EACH HELICOPTER/ENGINE/COMPONENT

3.C.1. Kit(s) or component(s) to be ordered for one helicopter or one assembly Equipment part number Qty _Item Key Word SC8033-2 AR Main rotor servo-control SC8034-2 AR Main rotor servo-control

3.C.2. Materials to be ordered separately The materials identified by an asterisk "" or required for compliance with the tasks and/or work cards listed in paragraph 1.K., can be ordered from the INTERTURBINE company, Website: http://www.itlogistics.de Phone: +49.41.91.809.300 AOG: +49.41.91.809.444

3.C.3. Tool(s) Not applicable.

Approved under EASA DOA No. 21J.056. 67.08 Page 6/8 2007.02.19

Page 7OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

3.D. PROCUREMENT CONDITIONS Order the required quantity (unless otherwise specified) from Goodrich Actuation Systems Département EADS Réparations 43 rue des Prés 27950 Saint Marcel - France Telephone: +33 2.32.64.70.43 Fax: +33 2.32.64.70.01.

Or from

EUROCOPTER Etablissement de Marignane Sales and Customer Relations Department ECR 13725 MARIGNANE CEDEX FRANCE NOTE 1 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F.

Fax: +33 (0)4.42.85.99.96 NOTE 2 On the purchase order, please specify the mode of transport, the destination, and the serial numbers of the aircraft to be modified.

3.E. MATERIAL TO BE RETURNED Not applicable.

Approved under EASA DOA No. 21J.056. 67.08 Page 7/8 2007.02.19

Page 8OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN SA366

4. APPENDIX Not applicable.

Approved under EASA DOA No. 21J.056. 67.08 Page 8/8 2007.02.19