Service bulletin · Airbus

Revision 2FAA-2015-6550_SB A300-57-6011_Rev2 · 13 pages · 542 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-6550; AD 2016-18-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2015-6550 (document 0005) · AD 2016-18-08

Manufacturer
Airbus
Type
Service Bulletin
Number
A300-57-6011
Latest revision known
A300-57-6011, Revision 2, dated July 10, 1989

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 13OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-6550; AD 2016-18-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'cd3b1fd881d75a52f55446440e30073ae52e727d72a731686b50b6a324fdaa06'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

• A300-600

AIRBUS INDUSTRIE

PRODUCT SUPPORT DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE Tel. : (33) 61-93-33-33 Telex: AIRBU 530526F

SERVICE BULLETIN CHANGE NOTICE S. B. No. A300-57-6011 REV-2 DATED: Dec 17/86 MOD. NO.6661H1033 TITLE: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE BRACKETS

TO OUTER SHROUD BOX MODEL: ALL models listed on the S-B.

DESCRIPTION:

This notice is issued to inform the affected operators that subject Service Bulletin is changed as stated below.

Service Bulletin Page 1 paragraph 1.A. (2) read: Customer and Qty of Kits Fleet No. MSN A300-57-6011 -A01 KE 501-503 361, 365, 358 KU 101-103 327,332, 344 LH 601-607 380, 391, 401, 405, 408, 411, 414. 7 RF 001,051 354,374 SV 001-011 284, 294, 301, 307, 312, 317, 321 336, 341,348, 351 11 TG 051-056 368, 371, 377, 384, 395, 398 XQ-001 1 AA-050 423 1 instead of: Customer and Qty of Kits Fleet No. MSN A300-57-6011 -A01 KE501-503 361, 365, 358 KU101-103 327,332, 344 LH601-607 380, 391, 401, 405, 408, 411, 414 RFO01, 051 354,374 SV001-011 284, 294, 301, 307, 312, 317, 321, 336, 341, 348,351 11 TG051-056 368, 371, 377, 384, 395, 398 XX 252,423 This change will be incorporated in the next revision of this Service Bulletin;

however no revision is planned at the present time.

FILING INSTRUCTIONS File this Change Notice in front of this Service Bulletin.

SERVICE BULLETIN No: A300-57-6011 7 DATE: Mar 20/90 CHANGE NOTICE No. :2A Printed in France

Page 2OCROpen in PDF

• A300-600

AIRBUS INDUSTRIE

PRODUCT SUPPORT DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE SERVICE BULLETIN Tel (33) 61-93-33-33 REVISION TRANSMITTAL SHEET Telex AIRBU 530526 F MODIFICATION No: 6661H1033 ATA SYSTEM: 57 T IT L E: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE BRACKETS TO OUTER SHROUD BOX.

Find herewith Revision No.2 of SB.A300-57-6011. No additional work is required by this revision.

REASON To inform Operators of revised clearances when installing new hinge brackets.

SUMMARY Page 1 - Inclusion of Change Notices 1A and 1B. Revision No.2 added.

SERVICE BULLETIN Page 1 - Inclusion of Change Notice 1B. Revision No.2 added.

Page 2 - Inclusion of Change Notice 1A. DESCRIPTION sub-para (3) revised. Revision No.2 added.

Page 5 - Paragraph 2.A.(1) (c) revised. Revision No.2 added.

Page 7-8 - Paragraph 2.C.(2) revised. Revision No.2 added.

Page 11-12 - Drawing change. Revision No.2 added.

FILING INSTRUCTIONS

1. Remove and destroy page 1 of the Summary and pages 1,2,5,7-8 and 11-12.

2. Insert page 1 of the Summary and pages 1,2,5,7-8 and 11-12 at Revision No. 2.

REVISION SEQUENCE ORIGINAL - DEC 17/86 REVISION NO.1 - MAR 19/87 REVISION NO.2 - 7 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION No: 2 JUL 10/89 Printed in France PAGE: 1 of 1

Page 3OCROpen in PDF

• A300-600

AIRBUS INDUSTRIE

PRODUCT SUPPORT DIRECTORATE 1 ROND POINT MAURICE BELLONTE SERVICE BULLETIN 31707 BLAGNAC CEDEX FRANCE SUMMARY Tel (33) 61-93-33-33 Telex AIRBU 530526 F This summary is for information only and is not D.G.A.C. approved for modification of the aircraft MODIFICATION No: 6661H1033 ATA SYSTEM: 57 T I T L E: WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE

BRACKETS TO OUTER SHROUD BOX REASON Cracking of hinge bracket assemblies, which are situated on the outer shroud box and form the rear attachment between the inner and outer shroud boxes, has been discovered during routine maintenance checks on some in-service A300 aircraft which had accumulated between 15150 and 20380 flights and 14070 to 18740 flight hours. Failure of the bracket would allow vertical movement of the inner shroud box structure in the immediate area and probable fouling of the inboard flap top skin. Additionally, the loads carried through this bracket will be transferred to the remaining supports which may eventually crack; extensive structural damage could then result.

Inspection Service Bulletin (ISB) A300-57-6010 details methods of detecting cracked brackets. Embodiment of this modification renders further compliance with ISB A300-57-6010 unnecessary.

This Service Bulletin introduces new Steel Brackets to replace the existing aluminium alloy brackets in order to improve the fatigue Life.

This Service Bulletin is subject to airworthiness authorities monitoring.

ACTION At each wing the No.1 inner airbrake is removed. The inner shroud box attachment bolts are removed and the shroud box is raised to allow removal of the existing aluminium alloy bracket assembly. A new, steel bracket assembly is installed. The inner airbrake is reinstalled and function tested.

EFFECTIVITY This modification is applicable by Service Bulletin on the following A300-600 aircraft: - 252,284,294,301,307,312,317,321,327,332,336,341,344, 348,351,354, 358,361,365,368,371,374,377,380,384,391,395,398,401,405,408,411 and 423. Embodied prior to delivery on aircraft MSN 388,417,420,459 and subsequent.

COMPLIANCE Recommended 7 DATE: DEC 17/86 SERVICE BULLETIN REF:A300-57-6011 Printed in France REVISION NO: 2 DUL 10/89 PAGE: 1 of 2

Page 4OCROpen in PDF

AIRBUS .. • NOUSTRIE A300-600 SERVICE BULLETIN

SUMMARY

MANPOWER Kit No.A300-57-6011-A01 Manhours : 26.75 Elapsed time (hours, 2 fitters) 13.75

MATERIAL INFORMATION Kit No. A300-57-6011-A01 2 Hinge Bracket Assemblies, 18 Cotter pins, 20 Nuts.

BRACKET ASSEMBLY

OUTER SHROUD BOX DATE: DEC 17/86 SERVICE BULLETIN REF: A300-57-6011 REVISION NO: Printed in France PAGE: 2 of 2

Page 5OCROpen in PDF

• A300-600

AIRBUS INDUSTRIE

PRODUCT SUPPORT DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE A300-600 SERVICE BULLETIN Tel (33) 61-93-33-33 Telex AIRBU 530526 F MODIFICATION No: 6661H1033 ATA SYSTEM: 57 T I T L E : WINGS - AUXILIARY STRUCTURE - TO INTRODUCE IMPROVED AFT HINGE

BRACKETS TO OUTER SHROUD BOX

1. PLANNING INFORMATION A. EFFECTIVITY

(1) Aircraft Models : B4-601, 84-602, B4-602R, B4-602 B4-621R, C4-620.

(2) Aircraft Customer and MSN Qty of Kits Fleet No. A300-57-6011 -A01 KE501-503 361, 365, 358 3 KU101-103 327,332,344 3 LH601-607 380, 391, 401, 405, 408, 411, 414 RF001, 051 354,374 2 SV001-011 284, 294, 301, 307, 312, 317, 321, 336, 341, 348, 351 TG051-056 368, 371, 377, 384, 395, 398 xX 252, 423 This modification is embodied prior to delivery on aircraft MSN 388,417,420,459 and subsequent. The above effectivity and kit allocation is based on aircraft modification status and delivery and subsequent Airbus Service Bulletin accomplishment reported to Airbus Industrie.

(3) Spares None .

B.REASON Cracking of hinge bracket assemblies, which are situated on the outer shroud box and form the rear attachment between the inner and outer shroud boxes, has been discovered during routine maintenance checks on some in-service A300 aircraft which had accumulated between 15150 and 20380 flights and 14070 to 18740 flight hours. Failure of the bracket would allow vertical movement of the inner shroud box structure in the immediate area and probable fouling of the inboard flap top skin.

Additionally, the loads carried through this bracket will be transferred to the remaining supports which may eventually crack;

extensive structural damage could then result.

7 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION No: 2 JUL 10/89 Printed in Franco PAGE: 1 of 13

Page 6OCROpen in PDF

O AJUU-DUU Inspection Service Bulletin (ISB) A300-57-6010 details methods of detecting cracked brackets. Embodiment of this modification renders further compliance with ISB A300-57-6010 unnecessary.

This Service Bulletin introduces new Steel Brackets to replace the existing aluminium brackets in order to improve the fatigue life.

This Service Bulletin is subject to airworthiness authorities monitoring.

C.DESCRIPTION Accomplishment of this Service Bulletin consists of i-

AIRCRAFT Kit No.A300-57-6011-A01. ALL aircraft Listed in Para.1.A. (2).

(1) Removing inner airbrake No.1, LH and RH.

(2) Removing access panels.

(3) Checking for equal clearance between the bearing and bracket taces of the forward attachment bracket.

(4) Removing 42 bolts attaching landing gear bay top panel to inner shroud box.

(5) Removing inner shroud box attaching bolts.

(6) Raising inner shroud box sufficient to gain access to hinge bracket.

(7) Removing existing aft hinge bracket.

(8) Installing new steel Hinge Brackets at existing positions.

(9) Re-installing inner shroud boxes.

(10) Re-installing and function testing inner airbrakes.

(11) Closing up all access panels.

D. APPROVAL This Service Bulletin is approved by Direction Generale de L'Aviation Civile - FRANCE (D.G.A.C.).

7 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 Printed in France REVISION No: 2 JUL 10/89 PAGE: 2

Page 7OCROpen in PDF

AIRBUS ! J 'NOUSTRIE A300-600 SERVICE BULLETIN E. MANPOWER Manhours per aircraft Kit No. A300-57-6011- A01 Gain access 9.25 Removal of Brackets 1.00 Installation of new Brackets 6.50 Close up and test 10.00 TOTAL MANHOURS 26.75 ELAPSED TIME (HOURS) (2 FITTERS) 13.75 NOTE: This Service Bulletin assumes that the aircraft has been placed in a maintenance status. The manhours/elapsed time do not include preparation for the modification, non-productive elapsed time or administrative functions.

F. MATERIAL - COST AND AVAILABILITY Refer to Paragraph 3 - MATERIAL INFORMATION.

G. TOOLING - COST AND AVAILABILITY None.

H. WEIGHT AND BALANCE MEW + 0.72 kg (+ 1.58 lb) Moment + 23.5 kg.m (+ 169.92 lb ft)

1. REFERENCES Aircraft Maintenance Manual (AMM) 06-41-57, 27-61-54, 20-31-00 Inspection Service Bulletin (ISB) A300-57-6010 J. PUBLICATIONS AFFECTED Illustrated Parts Catalog (IPC) 57-51-11 Structural Repair Manual (SRM) 57-51-11 DATE: SERVICE BULLETIN No: A300-57-6011 REVIETON NO: 1 M1B 10/27 Printed in France PAGE• 4-L

Page 8OCROpen in PDF

• A300-600

2. ACCOMPLISHMENT INSTRUCTIONS

AIRCRAFT A „GENERAL WARNING : BEFORE PROCEEDING WITH MAINTENANCE WORK ON OR NEAR

MECHANICAL FLIGHT CONTROLS OR PRIMARY FLIGHT CONTROL

SURFACES, LANDING GEARS, ASSOCIATED DOORS OR ANY MOVING

COMPONENT MAKE CERTAIN THAT GROUND SAFETIES AND/OR WARNING

NOTICES ARE IN CORRECT POSITION TO PREVENT INADVERTENT OPERATION OF CONTROLS.

The following instructions are applicable to both LH and RH wings.

(1) Job set up

(a) Refer to Aircraft Maintenance Manual (AMM 27-61-54 page block

401. Remove and retain inner airbrake No.1.

(b) Refer to AMM 06-41-57.

- Lower flap deflector panels 572AB, 572CB, 572GB, 672AB, 672CB and 672GB.

- Remove and retain access panel A57240980 from the inboard aft edge of each outer shroud box as shown in figure 1, view A.

- Remove and retain wing to fuselage fairing panels 577CT, 577DT, 677CT and 677DT.

(c) Refer to Figure 1 View A and Figure 2 Detail E.

- Gain access to the forward attachment point which connects the inner shroud box to the outer shroud box.

- Using a suitable light source and mirror make sure that an equal gap exists between the bearing and the bracket faces as shown in Figure 2. Detail E.

- If a gap exists METHOD ONE (op.B.(3) refers) can be used to install the new aft hinge bracket.

- If there is no gap at all METHOD TWO (op.B.(4) refers) must be used to install the new aft hinge bracket.

(d) Refer to Figure 1, View A.

- Place suitable supports beneath the inner shroud box to prevent excessive movement when the shroud box is released from the wing.

- Remove and retain the 42 bolts attaching the landing gear bay top panel to the forward edge of the inner shroud box.

- Remove and discard the cotter pins from each of the bolts at the main attachment points denoted 'C'.

7 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION No: 2 JUL 10/99 Printed in Franco PAGE: 5

Page 9OCROpen in PDF

AIRBUS , INDUSTRIE A300-600 SERVICE BULLETIN

- Remove and retain nuts, washers and special bolts (Qty.5) from the attachment points.

- Remove and retain the sliding bush from the aft inner to outer shroud box attachment.

(e) Carefully raise the aft edge of the inner shroud box just sufficient to gain access to the aft hinge bracket situated o the inboard edge of the outer shroud box, as shown in Figure 1, View B.

NOTE: Movement of the inner shroud box is severely restricted by electrical looms and hydraulic pipes. When raising the shroud box ensure that the looms or pipes are not strained. Removal of 'p'-clips will allow increased movement of the shroud box.

B. MODIFICATION Kit No.A300-57-6011-A01

(1) Mark around the outline of the existing aft hinge bracket on the outer shroud box using a sharpened pencil.

(2) Remove and discard the existing hinge bracket from the outer shroud box taking note of the direction of installation and position of all the attaching bolts. Retain bolts and washers; discard nuts.

(3) METHOD ONE. Refer to Figure 1, View B.

(a) Position the new Hinge Bracket Assembly A5724864100095, Item 1, LH, (A5724864100195, Item 2, RH) to the pencil outline on the shroud box and clamp.

(b) Ensure sufficient hole landings and that dimensions shown are correct.

Mark the position of holes to be drilled in the hinge bracket from the existing vacant bolt holes in the shroud box.

(c) Remove the hinge bracket assembly from the shroud box and drill/ream sixteen holes 0.190/0.192 in. (4.83/4.88 mm) dia. at positions previously marked.

(d) Spotface ten holes denoted 'D' 0.5625 in. (14.3 mm) dia. (spotface corner radius to be 0.0625 in. (1.53 mm)). Spotface to minimum depth to provide correct nut seating. Deburr all holes. Ensure corner radius of 0.015/0.025 in. (0.38/0.63 mm) is achieved on three holes as shown to allow bolt heads to seat correctly. Thoroughly clean spotfaces with Genklene (Mat.No.11-004). Restore protective treatment using Primer (Mat. No.16-006) and Polyurethane finish (Mat.No.16-018)

(e) Install new Anchor Nuts NAS1067C3 to bracket assembly as shown with Sealant PR1431-G (Mat.No.09-005) using new Rivets L21217024008DCA.

(f) Install new Bracket Assembly to shroud box using bolts retained in op.B.(1) with new Nuts H19200C-3 Item 6 using Sealant PR1431-G (Mat-No. 09-005) on interfaying surfaces, nuts & id bolts.

DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION NO: Printed In France PAGE: 6

Page 10OCROpen in PDF

• A300-600

(4) METHOD TWO. Refer to Figure 1 View A, and Figure 2.

(a) Refer to Figure 2 Detail 'F'. Bolt the new Hinge Bracket Assembly A5724864100095, Item 1, LH (A5724864100195, Item 2, RH) to the inner shroud box outboard aft attachment bracket using the appropriate bolts retained in op.2.A.(1) (d) together with sliding bush.

(b) Temporarily reinstall the inner shroud box to the remaining main attachment points and suitably support.

(c) Refer to Detail 'E'. Reinstall two bolts denoted 'G' so that the threads are just engaged, to the landing gear bay top

(d) Refer to Figure 2 Detail 'F'. Clamp new Hinge Bracket Assembly, Item 1 LH (item 2 RH) to the outer shroud box ensuring that a minimum gap of 0.008 in. (0.20 mm) exists between the flange of the fixed bearing and the washer.

(e) Mark the position of holes to be drilled in the new Hinge Bracket from the existing vacant bolt holes. Ensure that sufficient hole landing exists.

(f) Support inner shroud box, remove and retain all bolts installed at op.2.B. (4) (b) and (c).

(g) Refer to Figure 1, View B. Remove the new Hinge Bracket Assembly, Item 1 LH (Item 2 RH) from the inner shroud box;

retain the bolts and sliding bush installed at op.2.B. (4)(a).

(h) Perform op.2.B.(3) (c) to 2.B.(3) (f).

C.CLOSE UP AND TEST

(1) Carefully lower the inner shroud box to its original position lining up with attachment points.

(2) Reinstall sliding bush to the aft inner to outer shroud box attachment. Install special bolts with nuts and washers retained in op.A. (1) (d) and new Cotter Pins MS24665-304, Item 3 (Qty.3) and MS24665-155, Item 4 (Qty.2), to attachment points.

(3) Reinstall attaching bolts retained in op.2.A.(1) (d) into the Landing gear bay top panel using Sealant PR1431-G (Mat. No.09-005).

(4) Refer to AMM 27-61-54 page block 401. Re-install inner airbrake No.1 retained at op.A. (1) (a) using new Cotter Pins MS24665-304, Item 3, (Qty.2) and MS24665-374, Item 5, (Qty.2). Perform relevant tests as detailed.

(5) Ensure work areas are clean and clear of tools and miscellaneous items of equipment.

(6) Re-install all access panels removed or opened in op.A.(1) (b).

7 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 Printed in France REVISION No: 2 JUL 10/89 PAGE: 7-8

Page 11OCROpen in PDF

AIRBUS U) INDUSTRIE A300-600 SERVICE BULLETIN OUT* BD SEE FIGURE 2

DETAIL F No.1 INBOARD SPOILER

ATTACHMENT POINTS ACCESS PANEL A572-40980

1.38 IN.

REF (35.05mm) -(REF) REF) (12.70mm • 50 I (15.24mm) 0.60 IN. (REF)

INNER SHROUD BOX SEE FIGURE 2

DETAIL E

REMOVE AND RETAIN BOLTS (QTY 42) SECURING LANDING

ENSURE CORNER RADIUS ON GEAR BAY TOP PANEL TO HOLES (QTY 3) of 0.015/0.025IN INNER SHROUD BOX.

TO ALLOW BOLT HEADS TO SEAT CORRECTLY WHEN INSTALLED. 1 ‹LH> 2 (RH)

LANDING GEAR BAY

TOP PANEL /OUTER SHROUD

VIEW SHOWING POSITION OF AFT BOX

HINGE BRACKET ON OUTER SHROUD BOX

VIEW LOOKING DOWN ON

INNER SHROUD BOX LH

RH SIMILAR BUT OPPOSITE Installation of new Hinge Bracket Assembly Figure 1 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION No: Printed in France PAGE: 9-10

Page 12OCROpen in PDF

AIRBUS! ¡INDUSTRIE A300-600 SERVICE BULLETIN SLIDING MIN. 0.008 IN.

BUSH (REF) (0.20MM)

BEARING FIXED (REF)- 1 CLH

• CRH

DETAIL F

MAKE SURE AN EQUAL

LANDING GEAR BAY GAP EXISTS BETWEEN

TOP PANEL THE BEARING AND

THE BRACKET FACES

DETAIL E Views showing clearances when installing the new Hinge Bracket Figure 2 DATE: DEC 17/86 SERVICE BULLETIN No: A300-57-6011 REVISION No: 2 JUL 10/89 Printed in France PAGE: 11-12