On this page
Text · 118
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0342, the docket of AD 2025-16-05. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5de6c83d6d06a2feee8515945665d454d40d271ec8e23e1a222616170de5c34d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5de6c83d6d06a2feee8515945665d454d40d271ec8e23e1a222616170de5c34d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 1
CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.
MANDATORY MANDATORY MANDATORY ATA SYSTEM: 57 TITLE: WINGS - MLG RIB 5 LOWER FLANGE SPOTFACES GEOMETRICAL
INSPECTION MODIFICATION No.:
None
A300-600
SERVICE BULLETIN
SUMMARY REV 00 Mar 27/24 A300-57-6125 Page 2 ATA SYSTEM: 57 TITLE: WINGS - MLG RIB 5 LOWER FLANGE SPOTFACES GEOMETRICAL
INSPECTION
SUMMARY This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS CONF 001
MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
CONF ALL B. REASON
(1) History As a result of in-service cracking in the Main Landing Gear attachment fitting at Rib 5, gear Rib 5 lower flange area has been subject to two consecutive mandated retrofit modifications to increase critical spotfaces corner radius, diameter and depth in order to decrease stress level:
- Initial modification: Service Bulletin No. A300-57-6088
- T erminative modification: Service Bulletin No. A300-57-6110.
Following recent occurrences of lower flange cracking, AIRBUS issued the AOT A57W017-21 to request a one-time inspection of all pre-mod 11912 A/C using the Fluorescent Penetrant method allowing the detection of small cracks. Since AOT publication, AIRBUS conducted an investigation that identified the root cause to be various maintenance errors (misapplication of Service Bulletin instruction), leading to incorrect geometry of the spotface (depth and radius).
(2) Objective/Action This Service Bulletin consists in a Special Detailed Inspection (SDI) by performing a one-time geometrical inspection of the seven identified spotfaces to assess geometric compliance to terminative modification. This inspection consists in a spotface geometry check using GO/NO-GO gauges, for the seven critical spotfaces on each rib
A300-600
SERVICE BULLETIN
SUMMARY REV 00 Mar 27/24 A300-57-6125 Page 3 (Left Hand (LH) side and Right Hand (RH) side holes 43, 47, 48, 49, 50, 52 and 54):
any spotface non-conformance is to be reported to AIRBUS for further instructions.
Spotfaces previously repaired as per Repair Instruction (RI) R572-43667 all sheets do not need to be inspected.
This Service Bulletin provides instructions to perform the inspection through two different options. Option 1 describes the removal of the nuts using spanner CHS943 without removal of the MLG actuating cylinder (aircraft jacking not required), while Option 2 covers the removal of the MLG actuating cylinder to allow access for the nut removal (aircraft jacking required, but spanner CHS943 not required).
(3) Advantages The embodiment of this Service Bulletin allows the operator to identify any potential deviation from the geometrical compliance to the terminative modification, and to contact AIRBUS for further instructions.
The appropriate embodiment of the terminative modification is essential to maintain the structural integrity of the aircraft.
(4) Operational/Maintenance Consequences None C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION CONF 001
MAINTENANCE CONFIGURATION
A/C JACKING YES CONF 002
MAINTENANCE CONFIGURATION
A/C JACKING YES
CONF ALL E. MATERIAL PRICE INFORMATION CONF 001
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
A300-600
SERVICE BULLETIN
SUMMARY REV 00 Mar 27/24 A300-57-6125 Page 4
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS T ool kit 576125T01R00 1 See SB Spotface gauges, spanner and sealing nut Components See SB See Note Nut NOTE: Price information to be obtained from the given supplier.
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS T ool kit 576125T01R00 1 See SB Spotface gauges, spanner and sealing nut Components See SB See Note Nut NOTE: Price information to be obtained from the given supplier.
CONF 002
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS T ool kit 576125T01R00 1 See SB Spotface gauges, spanner and sealing nut Components See SB See Note Nut NOTE: Price information to be obtained from the given supplier.
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS T ool kit 576125T01R00 1 See SB Spotface gauges, spanner and sealing nut Components See SB See Note Nut
A300-600
SERVICE BULLETIN
SUMMARY REV 00 Mar 27/24 A300-57-6125 Page 5 NOTE: Price information to be obtained from the given supplier.
CONF ALL F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):
26S 34P 34Z 98W ABR BCS F2I FDX IRA IRB IRM KAC KAL LOL MNB MON MRJ PVV QSM SMF
SOP SUD THA TNO UTP G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK CONF 001
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
AIRCRAFT YES
EQUIPMENT NO
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
AIRCRAFT YES
EQUIPMENT NO CONF 002
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
AIRCRAFT YES
EQUIPMENT NO
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
AIRCRAFT YES
EQUIPMENT NO
CONF ALL I. MANPOWER CONF 001
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
A300-600
SERVICE BULLETIN
SUMMARY REV 00 Mar 27/24 A300-57-6125 Page 6
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
MANPOWER TOTAL MAN-HOURS 38.75 h ELAPSED TIME (HOURS) 19.75 h
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
MANPOWER TOTAL MAN-HOURS 136.75 h ELAPSED TIME (HOURS) 41.25 h CONF 002
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
MANPOWER TOTAL MAN-HOURS 38.75 h ELAPSED TIME (HOURS) 19.75 h
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
MANPOWER TOTAL MAN-HOURS 136.75 h ELAPSED TIME (HOURS) 41.25 h
A300-600
SERVICE BULLETIN
SUMMARY Figure ICN-A300-A-57XX6125-A-FAPE3-0085Y-A-003-01 Fig.SA Sol.AA SHEET 1/1 REV 00 Mar 27/24 A300-57-6125General Overview Page 7
CONF ALL J. GENERAL OVERVIEW
CONF ALL A F W D INBD B A A
LH SHOWN
RH SYMMETRICAL Z572 Z672 RIB5 B MLG RIB 5 LOWER FLANGE SPOTFACES
TO BE INSPECTED F W D INBD HOLE 50 HOLE 54 HOLE 52 HOLE 47 HOLE 48 HOLE 43 HOLE 49 ICN-A300-A-57XX6125-A-FAPE3-0085Y-A-003-01
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 8 ATA SYSTEM: 57 TITLE: WINGS - MLG RIB 5 LOWER FLANGE SPOTFACES GEOMETRICAL
INSPECTION
1. PLANNING INFORMATION A. APPLICABILITY NOTE: This Service Bulletin is not applicable to spotfaces that have previously been repaired in accordance with RI R572-43667 all sheets.
NOTE: This Service Bulletin is not applicable to the aircraft on which MOD No. 11912H5490 (WINGS - STRUCTURE - RIB 1 TO RIB 29 - FIT MODIFIED GEAR RIB 5 MACHINING AND ASSEMBLY) is embodied or if the gear rib has been previously replaced with the Part Number (PN) A57240810-006 or PN A57240810-007 or PN A57240810-008 or PN A57240810-009 or PN A57240810-010 or PN A57240810-011.
NOTE: This Service Bulletin is applicable to aircraft on which MOD No. 13534H5720 (Service Bulletin No. A300-57-6110) is embodied.
(1) Models ON A/C 0380, 0401, 0405, 0408, 0411, 0414, 0546, 0553, 0618, 0623 B4-603 ON A/C 0464, 0505, 0518, 0521, 0532, 0556, 0558, 0563, 0584, 0603, 0608, 0626, 0632, 0643, 0696, 0701, 0707, 0709, 0713, 0715, 0723, 0725, 0727, 0732, 0741, 0744, 0746, 0749, 0754, 0763, 0764, 0773 B4-605R ON A/C 0358, 0361, 0365, 0388, 0417 B4-622 ON A/C 0477, 0479, 0530, 0536, 0543, 0555, 0557, 0559, 0561, 0569, 0572, 0575, 0579, 0581, 0602, 0607, 0611, 0613, 0617, 0621, 0625, 0630, 0631, 0633, 0635, 0637, 0641, 0657, 0659, 0662, 0664, 0666, 0668, 0670, 0677, 0679, 0683, 0685, 0688, 0703, 0711, 0717, 0722, 0724, 0729, 0730, 0733, 0734, 0737, 0739, 0740, 0743, 0750, 0753, 0756, 0762, 0767, 0770, 0775, 0783, 0786 B4-622R ON A/C 0344 C4-620 ON A/C 0726, 0728, 0735, 0736, 0738, 0742, 0745, 0748, 0752, 0757, 0759-0761, 0766, 0768, 0769, 0771, 0772, 0774, 0777-0781, 0789-0791 F4-605R
CONF ALL
(2) Applicability by MSN 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0464 0477 0479 0505 0518 0521 0530 0532 0536 0543 0546 0553 0555-0559 0561 0563 0569 0572 0575 0579 0581 0584 0602 0603 0607 0608 0611 0613 0617 0618 0621 0623 0625 0626 0630-0633 0635 0637 0641 0643 0657 0659 0662 0664 0666 0668 0670 0677 0679 0683 0685 0688 0696 0701 0703 0707 0709 0711 0713 0715 0717 0722-0730 0732-0746 0748-0750 0752-0754 0756 0757 0759-0764 0766-0775 0777-0781 0783 0786 0789-0791
(3) MSN by configuration CONF 001
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 9
MSN CONFIGURATION 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0464 0477 0479 0505 0518 0521 0530 0532 0536 0543 0546 0553 0555 0556 0557 0558 0559 0561 0563 0569 0572 0575 0579 0581 0584 0602 0603 0607 0608 0611 0613 0617 0618 0621 0623 0625 0626 0630 0631 0632 0633 0635 0637 0641 0643 0657 0659 0662 0664 0666 0668 0670 0677 0679 0683 0685 0688 0696 0701 0703 0707 0709 0711 0713 0715 0717 0722 0723 0724 0725 0726 0727 0728 0729 0730 0732 0733 0734 0735 0736 0737 0738 0739 0740 0741 0742 0743 0744 0745 0746 0748 0749 0750 0752 0753 001 CONF 002
MSN CONFIGURATION 0754 0756 0757 0759 0760 0761 0762 0763 0764 0766 0767 0768 0769 0770 0771 0772 0773 0774 0775 0777 0778 0779 0780 0781 0783 0786 0789 0790 0791 002
CONF ALL
(4) Configuration definition CONF 001 Configuration 001 CONF 001 is applicable to the aircraft on which MOD No. 10768H5385 is not embodied.
CONF 002 Configuration 002 CONF 002 is applicable to the aircraft on which MOD No. 10768H5385 is embodied.
CONF ALL B. CONCURRENT REQUIREMENTS None C. REASON
(1) History As a result of in-service cracking in the Main Landing Gear attachment fitting at Rib 5, gear Rib 5 lower flange area has been subject to two consecutive mandated retrofit modifications to increase critical spotfaces corner radius, diameter and depth in order to decrease stress level:
- Initial modification: Service Bulletin No. A300-57-6088
- T erminative modification: Service Bulletin No. A300-57-6110.
Following recent occurrences of lower flange cracking, AIRBUS issued the AOT A57W017-21 to request a one-time inspection of all pre-mod 11912 A/C using the Fluorescent Penetrant method allowing the detection of small cracks. Since AOT publication, AIRBUS conducted an investigation that identified the root cause to be various maintenance errors (misapplication of Service Bulletin instruction), leading to incorrect geometry of the spotface (depth and radius).
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 10
(2) Objective/Action This Service Bulletin consists in a Special Detailed Inspection (SDI) by performing a one-time geometrical inspection of the seven identified spotfaces to assess geometric compliance to terminative modification. This inspection consists in a spotface geometry check using GO/NO-GO gauges, for the seven critical spotfaces on each rib (Left Hand (LH) side and Right Hand (RH) side holes 43, 47, 48, 49, 50, 52 and 54):
any spotface non-conformance is to be reported to AIRBUS for further instructions.
Spotfaces previously repaired as per Repair Instruction (RI) R572-43667 all sheets do not need to be inspected.
This Service Bulletin provides instructions to perform the inspection through two different options. Option 1 describes the removal of the nuts using spanner CHS943 without removal of the MLG actuating cylinder (aircraft jacking not required), while Option 2 covers the removal of the MLG actuating cylinder to allow access for the nut removal (aircraft jacking required, but spanner CHS943 not required).
(3) Advantages The embodiment of this Service Bulletin allows the operator to identify any potential deviation from the geometrical compliance to the terminative modification, and to contact AIRBUS for further instructions.
The appropriate embodiment of the terminative modification is essential to maintain the structural integrity of the aircraft.
(4) Operational/Maintenance Consequences None D. DESCRIPTION NOTE: T o accomplish this Service Bulletin, you have two options.
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing 1 Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the LH Wing 2 Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the RH Wing 3 Do a SDI of the MLG Rib 5 Lower Flange Holes on the LH Wing 4 Do a SDI of the MLG Rib 5 Lower Flange Holes on the RH Wing CONF 001 5 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the LH Wing CONF 002 5 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the LH Wing CONF 001 6 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the RH Wing CONF 002 6 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the RH Wing
CONF ALL
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 11 7 Complete and Send the Inspection Report Sheet
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing 1 Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the LH Wing 2 Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the RH Wing 3 Do a SDI of the MLG Rib 5 Lower Flange Holes on the LH Wing 4 Do a SDI of the MLG Rib 5 Lower Flange Holes on the RH Wing CONF 001 5 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the LH Wing CONF 002 5 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the LH Wing CONF 001 6 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the RH Wing CONF 002 6 Install the Nut and Washer in the MLG Rib 5 Lower Flange on the RH Wing
CONF ALL 7 Complete and Send the Inspection Report Sheet E. COMPLIANCE
(1) Classification MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Union Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the thresholds given below but reference should be made to the AD for confirmation of the mandated accomplishment timescale.
One time inspection to be performed at the next heavy maintenance check without exceeding 30 months from Service Bulletin issuance. In case of double radius condition found or spotface not compliant, contact AIRBUS before next flight and follow their instructions.
F. APPROVAL The technical content of this document is approved under the authority of the Design Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.
G. MANPOWER CONF 001 The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
A300-600
SERVICE BULLETIN REV 00 Mar 27/24 A300-57-6125 Page 12 and tools, drying times for paints, sealants, etc., and general administration work are also not included.
(1) Inspection of the MLG Rib 5 Lower Flange Holes on the LH/RH Wing
(a) T ask set A300-A-57-XX-6125-01000-93BA-A OPTION 1 - Inspection of the MLG Rib 5 Lower Flange Holes with MLG Actuating-Cylinder Assembly Installed, on the LH/ RH Wing
PREPARATION Job Set-up 0.25 h
PROCEDURE Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the LH Wing
6.00 h Remove the Nut and Washer from the MLG Rib 5 Lower Flange on the RH Wing
6.00 h Do a SDI of the MLG Rib 5 Lower Flange Holes on the LH Wing
7.00 h Do a SDI of the MLG Rib 5 Lower Flange Holes on the RH Wing
7.00 h Install the Nut and Washer in the MLG Rib 5 Lower Flange on the LH Wing
6.00 h Install the Nut and Washer in the MLG Rib 5 Lower Flange on the RH Wing
6.00 h Complete and Send the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST None TEST None
CLOSE-UP Close-Up 0.25 h TOTAL MAN-HOURS 38.75 h ELAPSED TIME (HOURS) 19.75 h NOTE: For an explanation of the man-hours and elapsed time, refer to the Gantt Chart given in Appendix A.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin are those for the Inspection. Depending on the inspection result, additional man-hours can apply.
(b) T ask set A300-A-57-XX-6125-01000-93BB-A OPTION 2 - Inspection of the MLG Rib 5 Lower Flange Holes without MLG Actuating-Cylinder Assembly Installed, on the LH/RH Wing
PREPARATION Job Set-up 0.25 h Jack the Aircraft 13.50 h Remove the MLG Actuating-Cylinder Assembly on the LH Wing
17.00 h