Copy · A320-28-1239 R01 · 33 pages

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0863, the docket of AD 2020-05-17. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '287c9fd5ebce05f5077d2f577150300eff8a4a9114657f3ee2b6d4b3f84d171b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 1–12

@A318/A319/A320/A321

SERVICE BULLETIN L. INTERCHANGEABILITY/MIXABILITY NOTE : The interchangeability/mixability possibilities are for new or modified parts introduced by the accomplishment of this Service Bulletin.

DESCRIPTION OLD PART N˚ NEW PART N˚ INT

MIXABILITY SEE NOTES Bracket Assy-Support D2845002400000 D2845024000000 01 Not Applicable

(1) Bracket Assy-Support D2845002900000 D2845024100000 01 Not Applicable

(1) NOTE : For definitions of interchangeability codes in column INT., refer to ATA Common Support Data Dictionary (CSDD), Chapter 2.

NOTE

(1) : One way Interchangeable with conditions:

- the Old Part Number may be used as a replacement where the Old Part Number was installed

- the New Part Number is an acceptable replacement for the New Part Number without conditions

- the New Part Number is an acceptable replacement for the Old Part Number under specific conditions only:

. the condition is:

It is recommended that the Old Part Number is always replaced with the New Part Number. Spares impacted, General Code J, ICY Number, D20-81

- if the Old Part Number is fitted, a gap check must be carried out to make sure that there is a minimum clearance of 0.5 mm (0.020 in.) between the bracket assembly and the rib.

M. SPARES None DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 5 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN This Page Intentionally Left Blank DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 6 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

2. MATERIAL INFORMATION **CONF ALL A. MATERIAL - PRICE AND AVAILABILITY

(1) Procurement Addresses Customers with aircraft shown in the effectivity of this Service Bulletin should send a purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:

Kit 281239B01R02 Kit 281239B02R02 AIRBUS Material, Logistics and Suppliers

ATP II B Hein-Sass-Weg 24 21129 HAMBURG

GERMANY For ordering by internet:

http://spares.airbus.com For ordering by E-mail: airbus.kit@airbus.com Telephone Hotline: +49 40 743 51660

(2) Price and Availability Kit 281239B01R02 Cost

270.00 USD Availability 180 calendar days from receipt of order The availability given above is the standard lead time from the date of your purchase order. If items are required before this time, please include a retrofit planning schedule with your order so that we can try to comply with your requirements.

The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained through the AIRBUS Spares portal or through a request for quotation to airbus.kit@airbus.com.

Kit 281239B02R02 Cost

270.00 USD Availability 180 calendar days from receipt of order The availability given above is the standard lead time from the date of your purchase order. If items are required before this time, please include a retrofit planning schedule with your order so that we can try to comply with your requirements.

The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained through the AIRBUS Spares portal or through a request for quotation to airbus.kit@airbus.com.

B. INDUSTRY SUPPORT INFORMATION AIRBUS will not provide industry support for accomplishment of this Service Bulletin.

DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 7 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN C. LIST OF COMPONENTS Kit 281239B01R02 ITEM NEW PART N˚

QTY (UM)

KEYWORD ITEM OLD PART N˚ INT SEE NOTES 5 D2845024000000 1

SUPPORT

(5) D2845002400000 01 8 NSA5474-4K7 1 NUT

(8) NSA5474-4K7 10 NSA5474-3K7 1 NUT

(10) NSA5474-3K7 NOTE : For definitions of interchangeability codes in column INT., refer to ATA Common Support Data Dictionary (CSDD), Chapter 2.

NOTE : If you find part numbers of hardware components in the related kit(s) which you cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to Standards Manual (SM). The SM will give you the correct part number to part number relationship.

Kit 281239B02R02 ITEM NEW PART N˚

QTY (UM)

KEYWORD ITEM OLD PART N˚ INT SEE NOTES 6 D2845024100000 1

SUPPORT

(6) D2845002900000 01 8 NSA5474-4K7 1 NUT

(8) NSA5474-4K7 10 NSA5474-3K7 1 NUT

(10) NSA5474-3K7 NOTE : For definitions of interchangeability codes in column INT., refer to ATA Common Support Data Dictionary (CSDD), Chapter 2.

NOTE : If you find part numbers of hardware components in the related kit(s) which you cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to Standards Manual (SM). The SM will give you the correct part number to part number relationship.

D. LIST OF MATERIALS - OPERATOR SUPPLIED

(1) Consumable Materials Consumable CMLB01 ITEM

DESCRIPTION

REFERENCE TO CML MAT. No.

QTY PER A/C SEE NOTES Polysulfide Sealant-Fuel Tank Interfay 06ABC1 As required Adhesion Promoter-For Polysulfide Sealant 06PAG1 As required

(2) Components None DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 8 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

(3) Equipment None E. PARTS TO BE RE-IDENTIFIED BY OPERATOR None F. TOOLING None DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 9 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN This Page Intentionally Left Blank DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 10 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

3. ACCOMPLISHMENT INSTRUCTIONS Task 281239-831-895-001 - Modification

WARNING : MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.

WARNING : THIS PROCEDURE USES A FUEL SYSTEM ITEM THAT IS IN A CATEGORY

KNOWN AS A CRITICAL DESIGN CONFIGURATION CONTROL LIMITATION (CDCCL). CDCCL IDENTIFIES AN ITEM THAT CAN BE THE SOURCE OF A POSSIBLE FUEL TANK IGNITION. YOU MUST KEEP ALL CDCCL ITEMS IN THE APPROVED CONFIGURATION. DAMAGE, WEAR OR CHANGES TO A CDCCL ITEM CAN CAUSE A POSSIBLE FUEL TANK EXPLOSION.

CAUTION : ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP

ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE

WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:

- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS NECESSARY ON WIRING AND COMPONENTS.

- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER CONTAMINATION.

THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.

IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.

NOTE : The accomplishment instructions of this Service Bulletin include procedures given in other documents or in other sections of the Service Bulletin. When the words ’refer to’ are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words ’in accordance with’ are used then the given procedure must be followed.

NOTE : The access and close-up instructions, not comprising return to service tests, in this Service Bulletin do not constitute or affect the technical intent of the Service Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the Service Bulletin is met within the set parameters.

NOTE : Manual titles given in the accomplishment instructions are referred to by acronyms.

Refer to paragraph 1.J., References, for the definition of acronyms.

NOTE : This Service Bulletin is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these accomplishment instructions are Required for Compliance (RC) and must be done to comply with the AD. Other paragraphs are recommended and may be deviated from, done as part of other actions or done with accepted methods different from those given in the Service Bulletin, as long as the RC paragraphs can be done and DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 11 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN the aircraft can be put back into a serviceable condition.

NOTE : This Service Bulletin contains the instructions for the on-aircraft maintenance necessary to ensure the continued airworthiness of the aircraft.

For any deviations to the instructions contained herein, contact AIRBUS for further instructions and approval.

NOTE : Discarded parts must be managed at the operator’s discretion.

Task Associated Data Zone 550 650 Modified FIN 28QJ1 28QJ2 Access Panel 550CB 650CB Manpower

TOTAL MANHOURS

7.00

ELAPSED TIME (HOURS)

4.00 A. GENERAL

(1) Subtask 281239-910-401-001 - Standard Practices Manpower Resources Skills

NON SPECIFIC References Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001 06-41-57, Page Block 001 Task 20-21-11-911-001 Task 20-28-00-912-002 Task 28-10-00-910-001 Consumable Material List (CML) Elec. Std. Practices Manual (ESPM) 20-51-20

(a) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to the Consumable Material List (CML).

(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(c) For the identification of access panels, refer to AMM 06-41-57, Page Block 001.

(d) Put all the retained hardware in identified plastic bags and attach the bags to the related unit.

(e) To torque tighten the standard threaded fasteners, refer to AMM Task 20-21-11-911-001.

DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 12 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

(f) For the electrical bonding, re fer to ESPM 20-51-20 and AMM Task 20-28-00-912-002.

(g) For fuel safety procedures when you work in a fuel tank, refer to AMM Task 28-10-00-910-001.

(2) Subtask 281239-839-401-001 - Administrative Manpower Resources Skills

NON SPECIFIC Write in the applicable aircraft records that you have done all the work given in this Service Bulletin.

B. PREPARATION

(1) Subtask 281239-941-401-001 - Job Set-up Work Zones and Access Panels Zone Access/Work location 550 Access Panel 550CB 650 Access Panel 650CB Manpower Resources Skills

NON SPECIFIC References Aircraft Maintenance Manual (AMM) Task 12-34-24-869-002 Task 28-10-00-910-002 Task 28-12-45-000-001 Task 28-25-00-650-003 Task 28-46-16-000-001 NOTE : The items given in this note shall be considered as the basic Aircraft configuration before you start a maintenance task:

- Aircraft on the ground resting on landing gear (the ground safety locks and the wheel chocks are in position on the landing gear)

- Engine shut down, thrust reversers closed and locked

- Aircraft in clean configuration

- Parking brake applied

- Aircraft electrical network de-energized

- Hydraulic system s depressurized

- Access to the cockpit and cabin is available

- All circuit breakers are in closed position DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 13 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

- All controls in NORM, AUTO or OFF position.

(a) Make sure that the aircraft is electrically grounded, refer to AMM Task 12-34-24-869-002.

(b) Do the job set-up procedures as specified in the Removal of the Overflow Sensor, refer to AMM Task 28-46-16-000-001.

(c) Drain the fuel from the LH and RH Wing Surge Tanks, refer to AMM Task 28-25-00-650-003.

(d) Remove access panels 550CB and 650CB, refer to AMM Task 28-12-45-000-001.

(e) Vent the LH and RH Wing Surge Tanks, refer to AMM Task 28-10-00-910-002.

C. PROCEDURE

(1) Subtask 281239-960-401- 001 - Replace the LH Fuel Level Sensor Support Bracket Work Zones and Access Panels Zone Access/Work location 550 Access Panel 550CB Work location Rib 24 LH from Stringer 15 to Stringer 16 Manpower Resources Manhours

1.00 Minimum number of person 1 Subtask elapsed time

1.00 Skills

AIRFRAME Material necessary to do the job Kit 281239B01R02 ITEM NEW PART N˚

QTY (UM)

KEYWORD SEE NOTES 5 D2845024000000 1

SUPPORT 8 NSA5474-4K7 1 NUT 10 NSA5474-3K7 1 NUT Consumable CMLB01 ITEM

DESCRIPTION

REFERENCE TO CML MAT. No.

QTY PER A/C SEE NOTES Polysulfide Sealant-Fuel Tank Interfay 06ABC1 As required Adhesion Promoter-For Polysulfide Sealant 06PAG1 As required DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 14 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN References Aircraft Maintenance Manual (AMM) Task 20-28-00-912-002 Task 28-46-16-000-001 Task 28-46-16-400-001 Elec. Std. Practices Manual (ESPM) 20-51-20 Fig. A-UBAAA Replace the LH and RH Fuel Level Sensor Support Brackets Sheet 01 Sheet 02

(a) At Rib 24 LH between STGR 15 and STGR 16, refer to AMM Task 28-46-16-000-001 and Fig. A-UBAAA Sheet 01 , remove:

1 Bolt NAS1304-4 Item (1) Retain 1 Washer DHS783-6-20 Item (2) Retain 1 Bolt NAS1303-4 Item (11) Retain 1 Washer DHS783-5-20 Item (12) Retain 1 Shield D2845011320000 Item (13) Retain FIN 28QJ1 1 Sensor - Overflow EQ0028QJ1 Item (3) Retain NOTE : Do not electrically disconnect the Overflow Sensor 28QJ1.

You must support the Overflow Sensor, it must not hang freely.

1 Bolt-Protruding Head ASNA2027BV4-3 Item (7) Retain 1 Nut NSA5474-4K7 Item (8) Discard 1 Bolt-Protruding Head ASNA2027BV3-3 Item (9) Retain 1 Nut NSA5474-3K7 Item (10) Discard 1 Bracket Assy- Support D2845002400000 Ite m (5) Discard

(b) At Rib 24 LH between STGR 15 and STGR 16, refer to AMM Task 28-46-16-400-001 and Fig. A-UBAAA Sheet 02 , apply:

Polysulfide Sealant- Fuel Tank Interfay 06ABC1 As required to the contact surfaces of the Bracket - Support Assy LH, Item 5, and to the shank of the Bolts, (7) and (9). and install:

1 Bracket A ssy-Support LH D2845024000000 Item 5 DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 15 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN 1 Bolt-Protruding Head ASNA2027BV3-3 Item (9) Retained at removal 1 Nut NSA5474-3K7 Item 10 1 Bolt-Protruding Head ASNA2027BV4-3 Item (7) Retained at removal 1 Nut NSA5474-4K7 Item 8 1 Shield D2845011320000 Item (13) Retained at removal FIN 28QJ1 1 Sensor - Overflow EQ0028QJ1 Item (3) Retained at removal 1 Washer DHS783-6-20 Item (2) Retained at removal 1 Bolt NAS1304-4 Item (1) Retained at removal 1 Washer DHS783-5-20 Item (12) Retained at removal 1 Bolt NAS1303-4 Item (11) Retained at removal

(c) Electrically bond where shown, refer to Fig. A-UBAAA Sheet 02 , ESPM 20-51-20 and AMM Task 20-28-00-912-002.

(d) Apply:

Adhesion Promoter- For Polysulfide Sealant 06PAG1 As required and Polysulfide Sealant- Fuel Tank Interfay 06ABC1 As required to the:

- heads and tails of the Bolts, Items (1), (7), (9) and (11)

- the Nuts, Items 8 and 10.

DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 16 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

Pages 25–33 of 33