Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '287c9fd5ebce05f5077d2f577150300eff8a4a9114657f3ee2b6d4b3f84d171b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '287c9fd5ebce05f5077d2f577150300eff8a4a9114657f3ee2b6d4b3f84d171b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
@A318/A319/A320/A321
SERVICE BULLETIN
(2) Subtask 281239-960-402- 001 - Replace the RH Fuel Level Sensor Support Bracket Work Zones and Access Panels Zone Access/Work location 650 Access Panel 650CB Work location Rib 24 RH from Stringer 15 to Stringer 16 Manpower Resources Manhours
1.00 Minimum number of person 1 Subtask elapsed time
1.00 Skills
AIRFRAME Material necessary to do the job Kit 281239B02R02 ITEM NEW PART N˚
QTY (UM)
KEYWORD SEE NOTES 6 D2845024100000 1
SUPPORT 8 NSA5474-4K7 1 NUT 10 NSA5474-3K7 1 NUT Consumable CMLB01 ITEM
DESCRIPTION
REFERENCE TO CML MAT. No.
QTY PER A/C SEE NOTES Polysulfide Sealant-Fuel Tank Interfay 06ABC1 As required Adhesion Promoter-For Polysulfide Sealant 06PAG1 As required References Aircraft Maintenance Manual (AMM) Task 20-28-00-912-002 Task 28-46-16-000-001 Task 28-46-16-400-001 Elec. Std. Practices Manual (ESPM) 20-51-20 Fig. A-UBAAA Replace the LH and RH Fuel Level Sensor Support Brackets Sheet 01 Sheet 02
(a) At Rib 24 RH between STGR 15 and STGR 16, refer to AMM Task 28-46-16-000-001 and Fig. A-UBAAA Sheet 01 , remove:
1 Bolt NAS1304-4 Item (1) Retain 1 Washer DHS783-6-20 Item (2) Retain 1 Bolt NAS1303-4 Item (11) Retain DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 17 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN 1 Washer DHS783-5-20 Item (12) Retain FIN 28QJ2 1 Sensor - Overflow EQ0028QJ2 Item (4) Retain NOTE : Do not electrically disconnect the Overflow Sensor 28QJ2.
You must support the Overflow Sensor, it must not hang freely.
1 Shield D2845011320000 Item (13) Retain 1 Bolt-Protruding Head ASNA2027BV4-3 Item (7) Retain 1 Nut NSA5474-4K7 Item (8) Discard 1 Bolt-Protruding Head ASNA2027BV3-3 Item (9) Retain 1 Nut NSA5474-3K7 Item (10) Discard 1 Bracket Assy- Support D2845002900000 Ite m (6) Discard
(b) At Rib 24 RH between STGR 15 and STGR 16, refer to AMM Task 28-46-16-400-001 and Fig. A-UBAAA Sheet 02 , apply:
Polysulfide Sealant- Fuel Tank Interfay 06ABC1 As required to the contact surfaces of the Bracket - Support Assy RH, Item 6, and to the shank of the Bolts, (7) and (9). and install:
1 Bracket A ssy-Support RH D2845024100000 Item 6 1 Bolt-Protruding Head ASNA2027BV3-3 Item (9) Retained at removal 1 Nut NSA5474-3K7 Item 10 1 Bolt-Protruding Head ASNA2027BV4-3 Item (7) Retained at removal 1 Nut NSA5474-4K7 Item 8 1 Shield D2845011320000 Item (13) Retained at removal FIN 28QJ2 1 Sensor - Overflow EQ0028QJ2 Item (4) Retained at removal DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 18 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN 1 Washer DHS783-6-20 Item (2) Retained at removal 1 Bolt NAS1304-4 Item (1) Retained at removal 1 Washer DHS783-5-20 Item (12) Retained at removal 1 Bolt NAS1303-4 Item (11) Retained at removal
(c) Electrically bond where shown, refer to Fig. A-UBAAA Sheet 02 , ESPM 20-51-20 and AMM Task 20-28-00-912-002.
(d) Apply:
Adhesion Promoter- For Polysulfide Sealant 06PAG1 As required and Polysulfide Sealant- Fuel Tank Interfay 06ABC1 As required to the:
- heads and tails of the Bolts, Items (1), (7), (9) and (11)
- the Nuts, Items 8 and 10.
D. TEST NOTE : The listed subtasks are not in sequence with the work steps. The operator can change the sequence.
(1) Subtask 281239-740-401-001 - BITE Test of the Overflow Sensors Manpower Resources Skills
AIRFRAME References Aircraft Maintenance Manual (AMM) Task 28-46-00-740-001
(a) Do the BITE test of the Overflow Sensors 28QJ1 and 28QJ2, refer to AMM Task 28-46-00-740-001.
DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 19 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN E. CLOSE-UP
(1) Subtask 281239-942-401-001 - Close-up Work Zones and Access Panels Zone Access/Work location 550 Access Panel 550CB 650 Access Panel 650CB Manpower Resources Skills
NON SPECIFIC References Aircraft Maintenance Manual (AMM) Task 28-12-45-400-002 Task 28-46-16-400-001
(a) Make sure that the work areas are clean and clear of tools and other items of equipment.
(b) Install access panels 550CB and 650CB, refer to AMM Task 28-12-45-400-002.
(c) Do the close-up procedures as specified in the Installation of the Overflow Sensor, refer to AMM Task 28-46-16-400-001.
(d) Do a check for leaks at access panels 550CB and 650CB, no leaks are permitted.
(e) Put the aircraft back to its initial configuration.
DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 20 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN **CONF ALL
(7)
(9)
(10)
(8) RIB24 B
(11)
(12)
(1)
(2) (13)
(5)
(6) LH RH
LH SHOWN
RH SYMMETRICAL 550CB (650CB) RIB24 A C
(3) LH RH(4) 28QJ1 28QJ2 FWD STGR16STGR15 A BEFORE
VIEW LOOKING INBOARD ON RIB24 B N_SB_281239_7_BAAA_01_01 Figure A-UBAAA - Sheet 01 Replace the LH and RH Fuel Level Sensor Support Brackets DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 21 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN **CONF ALL D AFTER ASSEMBLE WITH MAT. NO. 06ABC1.
01 NOTE:
02 TORQUE TIGHTEN TO 2.25 − 2.8 Nm (19.91 − 24.78 lbf. in) 03 TORQUE TIGHTEN TO 4.5 − 5.6 Nm (39.83 − 49.56 lbf. in) 04
(11)
(12)
(1) (2) (13)
(7)
(9) 5 6 LH RH 10 8 04 05 01 03 01 02 04 05
ALL CADMIUM PLATED BOLT HEADS AND TAILS AND STEEL NUTS
NOT IN THE TANK BOUNDARIES BUT INSIDE THE TANK ARE TO BE OVERCOAT SEALED WITH MAT. NOS 06PAG1 AND 06ABC1.
ELECTRICALLY BOND AND TEST05 RIB24 STGR16STGR15 FWD
VIEW LOOKING INBOARD ON RIB24 C D
(3) LH RH(4) 28QJ1 28QJ2 01 01 01 01 N_SB_281239_7_BAAA_02_02 Figure A-UBAAA - Sheet 02 Replace the LH and RH Fuel Level Sensor Support Brackets DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 22 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN Appendix 01 - Manpower Gantt Chart **CONF ALL ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A320−28−1239
GET ACCESS
MH ET/S
TOTAL MANHOURS
SB ELAPSED TIME
7.00
4.00 STEPS
2.00 1.00 0 CLOSE−UP MH ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS 01 02 THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY TO DO THE WORK IS MORE SUITABLE FOR THEM.
01 02 NOTE:
PER 2 :
:
SB ELAPSED TIME (HOURS) 4
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS ARE NOT REFLECTED IN THIS GANTT CHART.
REPLACE THE LH FUEL LEVEL 1.00 1.00 1 TESTS
SENSOR SUPPORT BRACKET
REPLACE THE RH FUEL LEVEL
SENSOR SUPPORT BRACKET
1.00 1.00 1
1.00 1.00 1
2.00 1.002 321 N_SB_281239_7_AAAA_01_01 Figure A-UAAAA - Sheet 01 Appendix 01 - Manpower Gantt Chart DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 1 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN Service Bulletin REPORTING TITLE: FUEL - INDICATING - INTRODUCE COMMON FUEL LEVEL SENSOR
SUPPORT BRACKET MODIFICATION No.: 158133J4169 NOTE : This modification is related to an airworthiness issue which has been re-classified and confirmed by EASA as minor in acco rdance with EU Part 21.A.91. As such, this is handled by AIRBUS under its Design Organisation Approval No.
EASA.21J.031.
SB Reporting status This Service Bulletin will only be incorporated into affected customized Maintenance and Flight Operations Products if it is duly reported to Airbus.
General information The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for further information on the update of affected Flight Operations Products.
SB Reporting procedure Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about the reporting of prerequisite Service Bulletin?"
NOTE:
ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a regular basis.
DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 1 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A318/A319/A320/A321
SERVICE BULLETIN
QUALITY PERCEPTION FORM Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data that you provide us will be used to analyse areas of difficulties and to take corrective action to further improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a short description of the issue.
Planning Material Instructions X Effectivity X Kit content X Preparation X Reason X List of Materials Operator Supplied X Mod/Inspection X Manpower X Industry support X Test X References X Re-identification X Close-Up X Publication X Tooling X Illustrations Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE Attn : SEM4 Service Bulletins Management F A X:( 3 3 )56 19 34 25 1 Or via your Resident Customer Support Office.
DATE: Nov 22/16 SERVICE BULLETIN No.: A320-28-1239 REVISION No.: 01 - Sep 15/17 Page: 1 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.