Copy · A32N023-21-00 · 12 pages

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-1075, the docket of AD 2022-12-05. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'c531de239ba6d3676e36496e53210afa94c7f3d1c522cfae303ca82f356bf260'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 1 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 32 – MLG sliding tube : repetitive inspection at jacking dome area AIRCRAFT TYPE: A318, A319, A320, A321 OUR REF.: A32N023-21 Rev 00 dated 05-MAY-2021 EFFECTIVITY DATE: 15 May 2021

1. AIRCRAFT AFFECTED All A318, A319, A320, A321 Aircraft.

A320 Family NEO Aircraft are not affected by the content of this AOT.

2. REFERENCED DOCUMENTATION

2.1 APPENDIX

- Appendix 1: List of suspected MLG sliding tubes SN.

- Appendix 2: List of suspected MLG leg and dressings SN.

- Appendix 3: Inspection reporting sheet.

2.2 REFERENCES

- Ref.1: AOT A32N020-20 Rev 00 dated of 17 June 2020.

- Ref 2. Airworthiness Directive (AD) EASA 2020-0193 dated of 07 September 2020.

- Ref.3: Airworthiness Directive (AD) FAA 2020-21-09 dated of 30 October 2020.

- Ref.4: AOT A32N022-20 Rev 01 dated of 16 November 2020.

- Ref 5: Airworthiness Directive (AD) EASA 2020-0258 (Correction) dated of 19 November 2020.

- Ref 6: Airworthiness Directive (AD) FAA 2020-26-01 dated of 18 December 2020.

- Ref.7: AMM task 12-34-24-869-002 “Aircraft Grounding (Earthing) for the Maintenance Operations”.

- Ref.8: AMM task 32-11-00-100-002 “Cleaning of the Main Landing Gear”.

- Ref.9: AMM task 32-11-13-000-004 “Removal of the Sliding Tube Sub-Assembly of the MLG Shock Absorber “.

- Ref.10: AMM task 32-11-13-400-004 “Installation of the Sliding Tube Sub-Assembly of the MLG Shock Absorber”.

3. REASON Two cases of MLG sliding tubes cracked at jacking dome area have been reported during their second overhaul since their entry into service.

Investigations of the second reported case have led to identify a batch of MLG sliding tubes on which non detection of corrosion pits during overhaul could be suspected.

The purpose of this AOT is to request the operators to perform a repetitive General Visual Inspection (GVI) of MLG sliding tubes at jacking dome area on this identified batch.

3.1 FACTS Beginning of June 2020, two A320 MLG sliding tubes were found with a significant crack during their second overhaul since their entry into service.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 2 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Both cracks extended between the jacking dome bore and the 2M harness hole as shown in Figure 1.

Figure 1: Crack found on one MLG sliding tube at jacking dome area in June 2020.

The cracked MLG sliding tubes have accumulated respectively 26652 FC and 35894 FC and had previously been overhauled in 2010 in two different Maintenance and Repair Organization (MRO).

Pending investigation results and as a precaution, Airbus issued an AOT (Ref.1) which was subsequently mandated (Ref. 2, Ref .3), to request a one-off GVI of the suspected at-risk population of MLG sliding tubes.

Completion of the laboratory investigations of the two MLG sliding tubes have demonstrated two different root causes.

- For the first reported case:

Laboratory investigations have identified that the crack had initiated from thermal abuse due to an incorrectly performed Magnetic Particle Inspection (MPI) operation at previous overhaul.

Investigations have led to identify a batch of MLG sliding tubes on which thermal abuse during overhaul could be suspected. Airbus has issued a dedicated AOT (Ref.4) which was subsequently mandated (Ref.5, Ref.6), to request the operators to perform a repetitive GVI at jacking dome area on this identified batch.

- For the second reported case:

Laboratory investigations have identified that the crack had initiated from corrosion pits in the jacking dome bore of the MLG sliding tube that were not detected during the previous overhaul in 2010.

The MRO which had performed this previous overhaul, stopped activity at the end of 2014.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 3 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Investigations have been conducted to review the overhaul activity of MLG sliding tubes that have passed through this MRO, during its period of activity (September 2008 until end of 2014).

These investigations have led to identify a batch of MLG sliding tubes on which non detection of corrosion pits at jacking dome bore during overhaul could be suspected.

This identified batch is composed of:

- A list of MLG sliding tubes SN (Appendix 1) and,

- A list of MLG leg and dressings SN (Appendix 2), as the PN and SN of the MLG sliding tubes fitted on these MLG leg and dressings have not been identified.

3.2 CONSEQUENCES An undetected crack on the MLG sliding tube at the jacking dome area could lead to the rupture of the MLG sliding tube during operations.

3.3 AIM The aim of this AOT is to request operators to perform a repetitive General Visual Inspection (GVI) of MLG sliding tubes listed in Appendix 1 and of the MLG sliding tubes fitted on MLG leg and dressings listed in Appendix 2, to ensure that no crack is present in the area around the jacking dome.

This GVI shall be repeated until the next MLG sliding tube overhaul.

4. SHORT TERM ACTION NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The accomplishment instructions marked as Required for Compliance (RC) must be done to comply with the AD. “RC” is indicating these paragraphs accordingly.

NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words ’in accordance with’ are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the AOT is met within the set parameters.

4.1 PLANNING AND MANPOWER

4.1.1 ACCOMPLISHMENT TIMESCALE (RC) The MLG sliding tubes fitted on affected aircraft (refer to paragraph 1.) shall be inspected as per procedure defined in paragraph 4.2.2., at the earliest opportunity without exceeding 500 FC from the effective date of this AOT.

For the MLG sliding tubes listed in Appendix 1 and for the MLG sliding tubes fitted on MLG leg and dressings listed in Appendix 2, inspection as per paragraph 4.2.2.2 must be repeated at interval of 500 FC.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 4 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Accomplishment of MLG sliding tube overhaul in accordance with the applicable Component Maintenance Manual (CMM) cancels this repetitive GVI requested per paragraph 4.2.2.2.

4.1.2 MANPOWER The estimated time to perform the GVI of LH and RH MLG sliding tubes (as per paragraph 4.2.2) is 2 manhours.

4.2 DESCRIPTION

4.2.1 ACCESS As per AMM chapter “Introduction – Aircraft status for maintenance” in manual front matter section, the following items shall be considered as the basic A/C configuration, before starting a maintenance task:

- Aircraft on the ground resting on landing gear (the ground safety locks and the wheel chocks are in position on the landing gear).

- Engine shut down, thrust reversers closed and locked.

- Aircraft in clean configuration.

- Parking brake applied.

- Aircraft electrical network de-energized.

- Hydraulic systems depressurized.

- Access to the cockpit and cabin is available.

- All circuit breakers are in closed position.

- All controls in NORM, AUTO or OFF position.

This GVI does not require the removal of any component from the MLG (placard, jacking dome, wheels).

Furthermore, no aircraft and no wheel jacking are necessary to perform this GVI.

4.2.2 INSPECTION REQUIREMENTS (RC)

4.2.2.1 Do a check of the LH/RH MLG sliding tubes PN and SN, and a check of the LH/RH MLG leg and dressings PN and SN Do a check of the Landing Gear records or physical check to determine if the LH (Left Hand) and RH (Right Hand) MLG sliding tubes PN and SN are listed in Appendix 1 and if the LH and RH MLG leg and dressings PN and SN are listed in Appendix 2.

If the MLG sliding tubes are not listed in Appendix 1 and the MLG leg and dressings are not listed in Appendix 2, no further action is required.

If the MLG sliding tubes listed in Appendix 1 and the MLG sliding tubes fitted on MLG leg and dressings listed in Appendix 2, have been overhauled after the 1 st of January 2015, then no further action is required.

If the MLG sliding tubes are listed in Appendix 1 or the MLG sliding tubes fitted on MLG leg and dressings are listed in Appendix 2, and have not been overhauled after the 1 st of January 2015, then do the GVI as per paragraph 4.2.2.2., and repeat this inspection at interval not exceeding 500 FC.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 5 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.2.2.2 Do a GVI of the LH and RH MLG Sliding Tubes.

PREPARATION

(a) Make sure that the aircraft is electrically grounded, as per Ref. 7.

(b) Put a warning notice on panel 400VU to tell persons not to operate the landing gear controls.

Note: This GVI does not require the removal of placard and jacking dome in the area.

PROCEDURE

(a) Clean the external surface area around the MLG jacking dome, refer to Ref. 8.

(b) Do a GVI of the area around the jacking dome for cracks, refer to Figure 2.

Figure 2: Area of Inspection.

If cracks are found:

(1) Replace the cracked MLG Sliding Tube before the next flight as per Ref.9 and Ref.10.

(2) Contact AIRBUS immediately.

(3) Put the removed parts in quarantine pending Airbus instructions.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 6 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

(c) Appendix 3 Inspection Reporting sheet shall be filled and returned to Airbus even if nil findings.

CLOSE-UP

(a) Make sure that the work areas are clean and clear of tools and other items of equipment.

(b) Remove the warning notice.

(c) Put the aircraft back to its initial configuration.

4.2.3 FINDINGS (RC) In case of crack found during the GVI, the MLG sliding tube has to be replaced before next flight, refer to Ref.9 and Ref.10.

Report findings immediately to Airbus and put the removed parts in quarantine pending Airbus instructions.

4.3 SPARES AND TOOLING No specific tooling is required to perform this GVI.

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN It is anticipated that an Airworthiness Directive will be issued by EASA to mandate the content of this AOT.

5.2 IMPACTED DOCUMENTATION N/A

6. AOT APPROVAL The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.

7. REPORTING Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain, Engineering Support Section and ATA 32-11.

As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to be addressed to Airbus Customer Services through the generic e-mail address:

inspection.results@airbus.com.

Best Regards, Christian FREMONT

VICE PRESIDENT ENGINEERING SUPPORT

CUSTOMER SERVICES Jean-Pierre GOMEZ VICE PRESIDENT A320 PROGRAMME

CUSTOMER SERVICES

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 7 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 1 List of suspected MLG sliding tubes SN Aircraft type MLG sliding tubes Part Number MLG sliding tubes Serial Number 76B 1012B 1244B 1286B 1299B 1362B 1522B 1549B 1568B MAL1086 MAL1141 MAL1313 MAL1323 MAL1391 MAL1423 MAL1439 201160302 (CMM 32-11-33) SS4041 201371302 (CMM 32-11-33) 1366B 06MDM00112 06MDM00135 07B4281X15128 07B4380X15217 07B4580X8929 B1885058 B1975084 B4652242 B136-1986 B148-1944 B157-5034 B192-5102 B194-5061 B203-5085 B224-2065 B226-2057 B230-2104 A318/A319/A320 201371304 (CMM 32-11-33; 32-12-25) B232-2071

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 8 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT B237-2072 B254-5183 B254-5294 B255-5175 B287-5181 B288-5165 B320-2173 B343-5134 B394-2208 B399-2202 B403-5224 B408-5246 B438-5113 B444-5189 B464-2243 B490-5307 B492-5313 B505-2257 B508-2260 B533-5272 B578-5273 B585-5322 B594-5347 B622-2338 B637-2272 B678-2381 B686-2355 B687-2351 B777-2438 B779-2440 B794-5410 B832-2500 B835-2499 B891-2533 B903-2516 B939-5445 B972-2620 B988-2601 B995-5468 B999-5469 201371304 (CMM 32-11-33; 32-12-25) B1013-2665

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 9 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT B1041-5461 B1052-2670 B1054-2672 B1059-2677 B1086-5495 B1171-5514 B1176-5474 B1177-2739 B1234-2769 B1237-2772 B1278-2681 B1283-2846 B1299-2825 B1380-2884 B1383-2871 B1404-2927 B1488-3012 B1543-2965 B1564-5677 B1570-2995 B1577-5717 B1581-5708 B1586-5697 B1587-5698 B1591-5703 B1649-3050 B1662-3072 B1664-3076 B1673-5742 B1723-3108 B1726-3111 B1816-5776 B1874-3186 B1875-3187 B1920-3218 B1926-3199 B1947-3231 B1948-8082 B1981-3175 B2006-3261 201371304 (CMM 32-11-33; 32-12-25) B2008-3263

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 10 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT B2110-5764 B2126-8133 B2147-8111 B2191-3410 B2218-3431 B2234-3438 B2239-3443 B2274-3472 B2282-3506 B2400-3598 B2401-3599 B2403-3601 B2451-3610 B2455-3633 B2458-3611 B2460-3613 B2477-3650 B2514-3656 B2602-3726 B2603-3727 B3372-14410 B3399-14462 MDMDDD0014M MDMDDD0034M 201371304 (CMM 32-11-33; 32-12-25) MDMDDD0111M B0282-511 B0289-518 B0293-522 B0298-536 B0373-0606 B0378-623 B0440-689 B0477-726 B0482-740 A321 201522353 (CMM 32-12-22; 32-12-12) B0489-734

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 11 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 2 List of suspected MLG leg and dressings SN MLG leg and dressing MLG leg and dressingAircraft type side Part number Serial number LH 201376001-XXX(CMM 32-11-32) DRG1979/91 RH 201376002-XXX(CMM 32-11-32) DRG9413/90 M-DG-0422 MDG-0988 M-DG-1604 M-DG-2439 M-DG-2611 LH 201582001-XXX (CMM 32-12-24) MDG3296 M-DG-0425 MDG-0992 M-DG-1605 M-DG-2440 A318/A319/A320 RH 201582002-XXX (CMM 32-12-24) M-DG-2612 M-DG-0326LH 201585003-XXX(CMM 32-12-21) M-DG-0416 M-DG-0327A321 RH 201585004-XXX(CMM 32-12-21) M-DG-0417

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N023-21 Rev 00 Page 12 of 12 Date: 05-MAY-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 3

INSPECTION REPORTING SHEET

DATE OF INSPECTION PN SN CSN CSOMLG Sliding tube Fitted on A/C MSN

QUESTION YES

NO

ARE CRACKS FOUND ON

SURFACE AROUND THE JACKING DOME?

PN: Part Number.

SN: Serial Number.

CSN: Cycle Since New.

CSO: Cycle Since Overhaul.