On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 172
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0506; AD 2018-17-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '53938428c3742f30d8c8370d27b4b96e529c4bbdcf1eb4a6e6aa8572e2dcd2ed' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '53938428c3742f30d8c8370d27b4b96e529c4bbdcf1eb4a6e6aa8572e2dcd2ed' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 1
CONF ALL AIRBUS S.A.S.
Customer Services T echnical Data Support and Services 31703 Blagnac Cedex FRANCE
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.
MANDATORY MANDATORY MANDATORY ATA SYSTEM: 53 TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS MODIFICATION No.:
110281L80601
A350
SERVICE BULLETIN
SUMMARY REV 00 Nov 17/17 A350-53-P029 Page 2 ATA SYSTEM: 53 TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS
SUMMARY This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION MAJOR None MINOR 110281L80601 NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
NOTE: This modification related to an Airworthiness issue has been classified by Airbus and confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this minor change is handled by Airbus under its Design Organisation Approval No.
EASA.21J.031.
B. REASON
(1) History The rear fuselage cone structure between Frame 94 and Frame 102 has several multi material joints between different parts (aluminium/titanium/CFRP (Carbon Fiber Reinforced Plastic)) fitted with wet installed fasteners and interfay sealing. Both corrosion protection types are not enough to avoid the risk of corrosion issues in described areas. The affected areas are:
- jacking point
- Frame 98 lower beam
- Frame 98 upper beam
- upper corner fitting
- lower corner fitting
- Frame 95 reinforcements
- Frame 96 reinforcements
- beam —Stringer (STGR) joint part lower
- beam — STGR joint part upper
- STGRs 1 and 2 ( Frame 98 to Frame 102)
- door frame
- Frame 100 to Frame 102 bar upper
- Frame 100 to Frame 102 bar lower
(2) Objective/Action This Service Bulletin improves the corrosion protection applying new sealant fillets and Corrosion Preventive Compound (CPC) in affected areas.
A350
SERVICE BULLETIN
SUMMARY REV 00 Nov 17/17 A350-53-P029 Page 3
(3) Advantages The accomplishment of this Service Bulletin will prevent corrosion issues in the protected areas.
(4) Operational/Maintenance Consequences None C. GENERAL EVALUATION
EVALUATION TABLE COMPLIANCE MANDATORY (1) CANCELS INSPECTION SB NO
POTENTIAL AD YES A/C OPERATION AFFECTED NO
RELIABILITY AFFECTED NO PAX COMFORT AFFECTED NO
COST SAVING NO ETOPS AFFECTED NO
STRUCTURAL LIFE
EXTENSION
NO VENDOR SB NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
(1): Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION None E. MATERIAL PRICE INFORMATION
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS Aircraft standard tools See SB See Note T ools NOTE: Price information to be acquired by the given supplier.
F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):
CPA FIN HVN QTR SIA TAM G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
AIRCRAFT YES
EQUIPMENT NO I. MANPOWER
A350
SERVICE BULLETIN
SUMMARY REV 00 Nov 17/17 A350-53-P029 Page 4
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
MANPOWER TOTAL MAN-HOURS 34.50 h ELAPSED TIME (HOURS) 20.25 h
A350
SERVICE BULLETIN
SUMMARY Figure ICN-A350-A-53XXP029-A-FAPE3-03ET4-A-001-01 SHEET 1/1 REV 00 Nov 17/17 A350-53-P029General overview Page 5 J. GENERAL OVERVIEW
CONF ALL A , Z311 Z312 A
COMPOUND (CPC) ON AFFECTED AREAS FR93 FR102
APPLY SEALANT BEAD AND CORROSION PREVENTIVE AFFECTED AREAS NOT SHOWN01 NOTE:
01 ICN-A350-A-53XXP029-A-FAPE3-03ET4-A-001-01
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 6 ATA SYSTEM: 53 TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS
1. PLANNING INFORMATION A. APPLICABILITY NOTE: This modification is embodied before delivery on aircraft with Manufacturer Serial Number (MSN) 0005.
NOTE: This Service Bulletin is only applicable to aircraft on which Mod. No. 106695L80352 (FUSELAGE - CONE/REAR FUSELAGE - INTRODUCE STEP1 IMPROVEMENTS IN S19) is not embodied.
(1) Models ON A/C 0006-0039 350-941
CONF ALL
(2) Applicability by MSN 0006-0039
(3) MSN by configuration
MSN CONFIGURATION 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038 0039 001
(4) Configuration definition Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.
B. CONCURRENT REQUIREMENTS None C. REASON
(1) History The rear fuselage cone structure between Frame 94 and Frame 102 has several multi material joints between different parts (aluminium/titanium/CFRP (Carbon Fiber Reinforced Plastic)) fitted with wet installed fasteners and interfay sealing. Both corrosion protection types are not enough to avoid the risk of corrosion issues in described areas. The affected areas are:
- jacking point
- Frame 98 lower beam
- Frame 98 upper beam
- upper corner fitting
- lower corner fitting
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 7
- Frame 95 reinforcements
- Frame 96 reinforcements
- beam —Stringer (STGR) joint part lower
- beam — STGR joint part upper
- STGRs 1 and 2 ( Frame 98 to Frame 102)
- door frame
- Frame 100 to Frame 102 bar upper
- Frame 100 to Frame 102 bar lower
(2) Objective/Action This Service Bulletin improves the corrosion protection applying new sealant fillets and Corrosion Preventive Compound (CPC) in affected areas.
(3) Advantages The accomplishment of this Service Bulletin will prevent corrosion issues in the protected areas.
(4) Operational/Maintenance Consequences None D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure 1 Do the Protection at the Upper Corner fittings Area at LH FR102 2 Do the Protection at the Upper Corner fittings Area at RH FR102 3 Do the Protection at the Lower Corner fittings Area at LH FR102 4 Do the Protection at the Lower Corner fittings Area at RH FR102 5 Do the Protection of the LH and RH STGR1 and STGR2 between the FR98 and FR102 6 Do the Protection at the Upper Bar Area at FR100 7 Do the Protection at the Lower Bar Area at FR100 8 Do the Protection at the Upper Beam Area at LH FR98 9 Do the Protection at the Upper Beam Area at RH FR98 10 Do the Protection at the Lower Beam Area at LH FR98 11 Do the Protection at the Lower Beam Area at RH FR98 12 Do the Protection of the Jacking Point at FR98 13 Do the Protection at the Door Area at LH FR97 14 Do the Protection at the Door Area at RH FR97 15 Do the Protection at the Beam - STGR Joint Part Lower Area at LH FR96 16 Do the Protection at the Beam - STGR Joint Part Lower Area at RH FR96 17 Do the Protection at the Reinforcement Area at LH FR96
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 8 18 Do the Protection at the Reinforcement Area at RH FR96 19 Do the Protection at the Beam - STGR Joint Part Upper Area at LH FR96 20 Do the Protection at the Beam - STGR Joint Part Upper Area at RH FR96 21 Do the Protection at the Door Area at FR95 22 Do the Protection at the Door Area at LH FR98 23 Do the Protection at the Door Area at RH FR98 24 Do the Protection at the Door Area at LH FR95 25 Do the Protection at the Door Area at RH FR95 E. COMPLIANCE
(1) Classification MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale Accomplishment of this Service Bulletin must be done within 3 years from entry into service.
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the threshold given above but reference should be made to the AD for confirmation of the mandated accomplishment timescale.
F. APPROVAL The technical content of this document is approved under the authority of Design Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.
G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
PREPARATION Job Set-up 2.00 h
PROCEDURE Do the Protection at the Upper Corner fittings Area at LH FR102
2.00 h Do the Protection at the Upper Corner fittings Area at RH FR102
2.00 h
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 9 Do the Protection at the Lower Corner fittings Area at LH FR102
2.00 h Do the Protection at the Lower Corner fittings Area at RH FR102
2.00 h Do the Protection of the LH and RH STGR1 and STGR2 between the FR98 and FR102
3.75 h Do the Protection at the Upper Bar Area at FR100 0.50 h Do the Protection at the Lower Bar Area at FR100 0.50 h Do the Protection at the Upper Beam Area at LH FR98 2.25 h Do the Protection at the Upper Beam Area at RH FR98 2.25 h Do the Protection at the Lower Beam Area at LH FR98 2.00 h Do the Protection at the Lower Beam Area at RH FR98 2.00 h Do the Protection of the Jacking Point at FR98 0.75 h Do the Protection at the Door Area at LH FR97 1.00 h Do the Protection at the Door Area at RH FR97 1.00 h Do the Protection at the Beam - STGR Joint Part Lower Area at LH FR96
0.50 h Do the Protection at the Beam - STGR Joint Part Lower Area at RH FR96
0.50 h Do the Protection at the Reinforcement Area at LH FR96 0.50 h Do the Protection at the Reinforcement Area at RH FR96 0.50 h Do the Protection at the Beam - STGR Joint Part Upper Area at LH FR96
0.50 h Do the Protection at the Beam - STGR Joint Part Upper Area at RH FR96
0.50 h Do the Protection at the Door Area at FR95 0.50 h Do the Protection at the Door Area at LH FR98 0.50 h Do the Protection at the Door Area at RH FR98 0.50 h Do the Protection at the Door Area at LH FR95 0.50 h Do the Protection at the Door Area at RH FR95 0.50 h
PREPARATION FOR TEST Install Procedure 0.50 h TEST T est 0.50 h
CLOSE-UP Close-up 2.00 h TOTAL MAN-HOURS 34.50 h ELAPSED TIME (HOURS) 20.25 h
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 10 NOTE: Please take into account the drying times between each product to calculate the grounding time, the elapsed time does not take into account the drying times for example:
- between adhesion promoter and sealant
- sealant tack free time
- varnish drying time
- Reference CML 12ABC1: drying time from 1 hour to 24 hours
- Reference CML 12AEB1: 2 coats to be applied minimum drying time 30 minutes between 2 coats.
NOTE: For an explanation of the manhours and elapsed time, refer to the Gantt Chart given in Appendix Appendix 01 - Manpower Gantt Chart.
H. WEIGHT AND BALANCE The weight and balance estimates given in this Service Bulletin are based on the Manufacturer's Empty Weight (MEW) and do not include operator's items. For the definition of MEW and operator's items, refer to Ref. WBM.
Manufacturer's Empty Weight +0.690 kg (+1.521 lb) Effect on Balance +44.230 kg.m (+319.916 lbf) I. ELECTRICAL LOAD DATA Not changed J. REFERENCES
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
AIRCRAFT STRUCTURAL REPAIR (ASR) A350-A-51-24-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP) A350-A-20-55-XX-01ZZZ-042Z-A
MAINTENANCE PROCEDURE (MP) A350-A-12-XX-XX-02ZZZ-170Z-A A350-A-24-41-XX-00ZZZ-170Z-A A350-A-36-12-61-06ZZZ-520Z-A A350-A-36-12-61-06ZZZ-720Z-A A350-A-52-1X-XX-00ZZZ-132Z-A A350-A-52-1X-XX-01ZZZ-132Z-A A350-A-53-51-61-00ZZZ-520Z-A A350-A-53-51-61-00ZZZ-720Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS) 01-02-60 01-02-102 01-02-106
WEIGHT AND BALANCE MANUAL (WBM)
CONSUMABLE MATERIAL LIST (CML) K. PUBLICATION AFFECTED None
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 11 L. INDUSTRY SUPPORT INFORMATION AIRBUS will credit the man hours indicated in this Service Bulletin at the agreed in-house warranty labor rate for claims received no later than 90 days after completion of the last affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec 31/19.
A350
SERVICE BULLETIN REV 00 Nov 17/17 A350-53-P029 Page 12
2. MATERIAL INFORMATION A. MATERIAL APPLICABILITY Material for task set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure
MATERIAL QTY SEE NOTES Aircraft standard tools See SB Referenced tools See SB Consumables See SB Referenced parts See SB B. TOOLING Aircraft standard tools for task set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure Procurement address
NOTE(S) AIRBUS Material, Logistics and Suppliers IFD - In Flight Desk Weg beim Jaeger 150 D-22335
HAMBURG
GERMANY Fax: +49 40 50 76 4012 E-mail: ifd.spares@airbus.com Internet: http://spares.airbus.com Customers with aircraft shown in the applicability of this Service Bulletin should send a purchase order to AIRBUS at the address given above and quote the number of this Service Bulletin.
AIRBUS Material, Logistics and Suppliers Weg beim Jaeger 150 D-22335
HAMBURG
GERMANY Fax: +49 40 50 76 3225 E-mail: For ordering by E-mail: ool.LEASE@airbus.com Internet: http://spares.airbus.com Operators interested in the lease of standard tools should contact AIRBUS at the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES 98L27901001000 2 PIN 98V27401000000 1 LOCK 98V53509002000 1 PLATFORM 98V53509003000 1 PLATFORM 98V53509007000 1 NORCOS Referenced tools for task set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear Fuselage Cone Structure NOTE: T o accomplish this Service Bulletin it is necessary to use the tools listed in the subsequent referenced tasks: