On this page
Text · 18
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0724, the docket of AD 2019-21-07. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '620ece640109e7a0eaa67369f2ecafceeea5a03a2529896ae97a18c90a6d4f73' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '620ece640109e7a0eaa67369f2ecafceeea5a03a2529896ae97a18c90a6d4f73' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 1
CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.
MANDATORY MANDATORY MANDATORY ATA SYSTEM: 53 TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN SECTION 13/14 MODIFICATION No.:
None
A350
SERVICE BULLETIN
SUMMARY REV 00 Dec 19/18 A350-53-P046 Page 2 ATA SYSTEM: 53 TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN SECTION 13/14
SUMMARY This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History During inspection on a test aircraft, cracks have been detected on parts made of forging aluminum 7037 due to an unexpected behavior of this material.
(2) Objective/Action This Service Bulletin describes the detailed inspection of the external lugs of the Forward (FWD) cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25 and Frame 25A in the lower part of the cargo door surround.
NOTE: The accomplishment of Service Bulletin No. A350–53–P011 (Fuselage — Forward Fuselage — Introduce Improved Cargo Door Surround ALU Latch Fittings in Section 13/14 — SB only), cancels the requirement of this Service Bulletin.
(3) Advantages The accomplishment of this Service Bulletin will ensure the early detection of cracks on the lugs of the FWD cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25 and Frame 25A thus preventing unscheduled and large repairs.
(4) Operational/Maintenance Consequences The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the affected publications detailed in ‘PLANNING INFORMATION’.
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
A350
SERVICE BULLETIN
SUMMARY REV 00 Dec 19/18 A350-53-P046 Page 3
EVALUATION TABLE
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings No material F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):
CPA FIN HVN QTR SIA TAM G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
AIRCRAFT YES
EQUIPMENT NO I. MANPOWER
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
MANPOWER TOTAL MAN-HOURS 5.50 h ELAPSED TIME (HOURS) 5.50 h
A350
SERVICE BULLETIN
SUMMARY Figure ICN-A350-A-53XXP046-A-FAPE3-047AH-A-001-01 SHEET 1/1 REV 00 Dec 19/18 A350-53-P046General Overview Page 4 J. GENERAL OVERVIEW
CONF ALL A Z821 A
AREAS TO BE INSPECTED ICN-A350-A-53XXP046-A-FAPE3-047AH-A-001-01
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 5 ATA SYSTEM: 53 TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN SECTION 13/14
1. PLANNING INFORMATION A. APPLICABILITY NOTE: This Service Bulletin is only applicable to aircraft on which MOD No. 107049L31401 (Change Material AL 7037 to AL 7010 in Section 13/14) is not embodied.
(1) Models ON A/C 0006-0039 350-941
CONF ALL
(2) Applicability by MSN 0006-0039
(3) MSN by configuration
MSN CONFIGURATION 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038 0039 001
(4) Configuration definition Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.
B. CONCURRENT REQUIREMENTS None C. REASON
(1) History During inspection on a test aircraft, cracks have been detected on parts made of forging aluminum 7037 due to an unexpected behavior of this material.
(2) Objective/Action This Service Bulletin describes the detailed inspection of the external lugs of the Forward (FWD) cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25 and Frame 25A in the lower part of the cargo door surround.
NOTE: The accomplishment of Service Bulletin No. A350–53–P011 (Fuselage — Forward Fuselage — Introduce Improved Cargo Door Surround ALU Latch Fittings in Section 13/14 — SB only), cancels the requirement of this Service Bulletin.
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 6
(3) Advantages The accomplishment of this Service Bulletin will ensure the early detection of cracks on the lugs of the FWD cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25 and Frame 25A thus preventing unscheduled and large repairs.
(4) Operational/Maintenance Consequences The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the affected publications detailed in ‘PLANNING INFORMATION’.
D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings 1 Do a Detailed Inspection of the External Lugs of the Aluminum Latch Fittings E. COMPLIANCE
(1) Classification MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale Accomplishment of this Service Bulletin must be done.
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the thresholds and intervals given but reference should be made to the AD for confirmation of the mandated accomplishment timescale.
T able 1, CONF 001 — Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings for cracks
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL All aircraft Do a detailed inspection of the external lugs of the FWD cargo door aluminum latch fittings in accordance with Ref. T ask set A3 50-A-53-XX-P04 6-01ZZZ-93BZ-A Within 3600 Flight Cycle(s) or within 3 year(s) from entry into service, whichever occurs latest Before 690 Flight Cycle(s) See NOTE* None If crack(s) found Apply Service Bulletin No A350–53– P011 for the replacement of the cracked parts And Before next flight None None
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 7
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL No further action None None None If no crack found Apply Service Bulletin No A350–53– P011 And Before 690 Flight Cycle(s) None None No further action None None None OR Repeat the detailed inspection of the external lugs of the FWD cargo door aluminum latch fittings in accordance with Ref. T ask set A3 50-A-53-XX-P04 6-01ZZZ-93BZ-A None None Before 690 Flight Cycle(s) NOTE*: Grace Period is applicable to those aircraft which have overshoot 3600 Flight Cycle(s) at the time of the AD effective date.
F. APPROVAL The technical content of this document is approved under the authority of Design Organization Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.
G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
PREPARATION Job Set-up 2.00 h
PROCEDURE Do a Detailed Inspection of the External Lugs of the Aluminum Latch Fittings
1.50 h
PREPARATION FOR TEST None
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 8 TEST None
CLOSE-UP Close-up 2.00 h TOTAL MAN-HOURS 5.50 h ELAPSED TIME (HOURS) 5.50 h H. WEIGHT AND BALANCE Not changed I. ELECTRICAL LOAD DATA Not changed J. REFERENCES
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
ELECTRICAL STANDARD PRACTICES (ESP) A350-A-20-5X-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO) A350-A-00-6X-XX-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP) A350-A-24-41-XX-00ZZZ-170Z-A A350-A-50-1X-XX-00ZZZ-170Z-A A350-A-50-1X-XX-01ZZZ-170Z-A A350-A-50-23-XX-00ZZZ-561Z-A A350-A-52-33-71-01ZZZ-270Z-A A350-A-52-33-71-A4ZZZ-520Z-A A350-A-52-33-71-A4ZZZ-720Z-A
SERVICE BULLETIN (SB) A350-53-P011
TECHNICAL FOLLOW UP (TFU)
53.40.00.008
CONSUMABLE MATERIAL LIST (CML) K. PUBLICATION AFFECTED None L. INDUSTRY SUPPORT INFORMATION AIRBUS will credit the man hours indicated in this Service Bulletin at the agreed in-house warranty labor rate for claims received no later than 90 days after completion of the last affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec 31/21.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 9 For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit management department: monitored.retrofit@airbus.com.
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 10
2. MATERIAL INFORMATION A. MATERIAL APPLICABILITY Material for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
MATERIAL QTY SEE NOTES Referenced tools See SB Consumables See SB Referenced parts See SB B. TOOLING Referenced tools for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings NOTE: T o accomplish this Service Bulletin it is necessary to use the tools listed in the subsequent referenced tasks:
Ref. MP A350-A-50-1X-XX-00ZZZ-170Z-A Ref. MP A350-A-52-33-71-01ZZZ-270Z-A Ref. MP A350-A-52-33-71-A4ZZZ-520Z-A Ref. MP A350-A-52-33-71-A4ZZZ-720Z-A C. CONSUMABLES Consumables for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES 08BDA1 Non Aqueous Cleaner - Waxand grease remover 14SBA1 T extile - Lint free Cotton D. LIST OF NEW PARTS Referenced parts for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in the subsequent referenced task:
Ref. MP A350-A-52-33-71-01ZZZ-270Z-A E. LIST OF EXISTING PARTS No parts
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 11
3. ACCOMPLISHMENT INSTRUCTIONS Task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-5X- XX-01ZZZ-042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in other documents or in other sections of the Service Bulletin. When the words “refer to” are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words “in accordance with” are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein, contact AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and Compliance paragraphs and not to serve as the primary source for tasks or compliance times given in this Service Bulletin.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from, done as part of other actions or done with accepted methods different from those given in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be put back into a serviceable condition.
A. TASK SET ASSOCIATED INFORMATION Task Manpower TOTAL MAN-HOURS 5.50 h
A350
SERVICE BULLETIN REV 00 Dec 19/18 A350-53-P046 Page 12 ELAPSED TIME (HOURS) 5.50 h B. PREPARATION
(1) Task A350-A-53-XX-P046-02001-540A-A - Job Set-up Job Set-Up Information Manpower/Resources/Skills Man-hours 2.00 h Minimum Number of person 1 Elapsed Time 2.00 h Referenced Information Manuals/Drawings References/Sheets INTRO A350-A-00-6X-XX-11ZZZ-018Z-D MP A350-A-24-41-XX-00ZZZ-170Z-A A350-A-50-1X-XX-00ZZZ-170Z-A A350-A-50-23-XX-00ZZZ-561Z-A A350-A-52-33-71-A4ZZZ-520Z-A Procedure NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-6X- XX-11ZZZ-018Z-D “Introductions” in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350- A-24-41-XX-00ZZZ-170Z-A.
(b) Make sure that the cargo loading system is de-energized, refer to Ref. MP A350- A-50-23-XX-00ZZZ-561Z-A.
(c) Put an access platform in position below the FWD cargo-compartment door.
(d) Get access to the FWD cargo compartment, refer to Ref. MP A350-A-50-1X- XX-00ZZZ-170Z-A.
(e) Remove the spools of the FWD cargo-compartment door at Frame 24, Frame 24A, Frame 25 and Frame 25A, refer to Ref. MP A350-A-52-33-71-A4ZZZ-520Z-A.
C. PROCEDURE
(1) Task A350-A-53-XX-P046-01001-311A-A - Do a Detailed Inspection of the External Lugs of the Aluminum Latch Fittings Job Set-Up Information Working Area Impacted Zone Access / Work Location 821 Work location From Frame 24 to Frame 25A Manpower/Resources/Skills Man-hours 1.50 h Minimum Number of person 1 Elapsed Time 1.50 h Skills Airframe