On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 40
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0628; AD 2025-14-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '825ff01c14fe16fc78fd55d5f03d0ad26a1af0ae1f116fca69cd7171771e9f65' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '825ff01c14fe16fc78fd55d5f03d0ad26a1af0ae1f116fca69cd7171771e9f65' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 1
CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.
MANDATORY MANDATORY MANDATORY ATA SYSTEM: 54 TITLE: NACELLES / PYLONS - PYLONS - INSPECTION OF RIB 9 SPOT FACES MODIFICATION No.:
None
A350
SERVICE BULLETIN
SUMMARY REV 00 Jul 04/24 A350-54-P011 Page 2 ATA SYSTEM: 54 TITLE: NACELLES / PYLONS - PYLONS - INSPECTION OF RIB 9 SPOT FACES
SUMMARY This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History In production line, one too deep spot face was detected on pylon Rib 9 at lower flange bolting with the lower spar. During root cause investigation it has been noticed that other areas could be potentially affected. A too deep spot face on any of both external Rib 9 holes leads to a reduced fatigue life with a potential unsafe condition that cannot be ruled out. A production quality check has been conducted to conclude that the batch of aircraft included in the applicability list of this Service Bulletin are potentially impacted.
(2) Objective/Action The objective of this Inspection Service Bulletin is to detect the potential too deep spot faces on the Pylon Rib 9 (2 bolts per pylon), to provide the inspection tasks and to contact Airbus with the inspection results thru inspection report sheet.
(3) Advantages The implementation of this Service Bulletin on the affected A/C will avoid further repairs to be necessary to be performed due to a reduced fatigue life of the pylon attachment.
(4) Operational/Maintenance Consequences None C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO NOTE: Service Bulletin must be accomplished.
A350
SERVICE BULLETIN
SUMMARY REV 00 Jul 04/24 A350-54-P011 Page 3 D. MAINTENANCE CONFIGURATION No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS T ool kit 54P011T01R00 1 See SB GO-NoGO Gauges F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):
AAR CAL CCA CES CPA CSC DAL DLH EDW ETH FBU FIN FWI HVN IBE ITY MAS MAU PAL QTR
SIA THA G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9
AIRCRAFT YES
EQUIPMENT NO I. MANPOWER
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9
MANPOWER TOTAL MAN-HOURS 7.25 h ELAPSED TIME (HOURS) 4.75 h
A350
SERVICE BULLETIN
SUMMARY Figure ICN-A350-A-54XXP011-A-FAPE3-07ERW-A-001-01 Fig.SA Sol.AA SHEET 1/2 REV 00 Jul 04/24 A350-54-P011General overview Page 4 J. GENERAL OVERVIEW
CONF ALL A B Z460 Z450 A B C C ICN-A350-A-54XXP011-A-FAPE3-07ERW-A-001-01
A350
SERVICE BULLETIN
SUMMARY Figure ICN-A350-A-54XXP011-A-FAPE3-07ERX-A-003-01 Fig.SA Sol.AA SHEET 2/2 REV 00 Jul 04/24 A350-54-P011General overview Page 5
CONF ALL C
LH SHOWN D
LH SHOWN
RH IDENTICAL
VIEW LOOKING FWD INBD RIB9
DO A SPECIAL DETAILED
INSPECTION OF THE TWO SPOT FACES OF RIB 9 D
RH IDENTICAL ICN-A350-A-54XXP011-A-FAPE3-07ERX-A-003-01
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 6 ATA SYSTEM: 54 TITLE: NACELLES / PYLONS - PYLONS - INSPECTION OF RIB 9 SPOT FACES
1. PLANNING INFORMATION A. APPLICABILITY
(1) Models ON A/C 0102, 0161, 0215, 0262 350-1041 ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089, 0091-0101, 0103-0107, 0109, 0111-0116, 0120-0122, 0124, 0126-0128, 0130, 0132, 0134-0138, 0140, 0142, 0144-0146, 0148-0151, 0154, 0155, 0157-0159, 0162, 0163, 0165, 0167, 0168, 0170, 0172, 0173, 0175, 0177, 0179-0181, 0183, 0186, 0187, 0190-0193, 0195-0205, 0207-0210, 0212-0214, 0216- 0221, 0223, 0224, 0226-0228, 0230-0232, 0234-0239, 0243-0246, 0248-0250, 0254-0256, 0259, 0263-0265, 0267-0273, 0276-0281, 0283, 0284, 0287 350-941
CONF ALL
(2) Applicability by MSN 0005-0058 0060-0064 0066-0070 0072-0087 0089 0091-0107 0109 0111-0116 0120- 0122 0124 0126-0128 0130 0132 0134-0138 0140 0142 0144-0146 0148-0151 0154 0155 0157-0159 0161-0163 0165 0167 0168 0170 0172 0173 0175 0177 0179-0181 0183 0186 0187 0190-0193 0195-0205 0207-0210 0212-0221 0223 0224 0226-0228 0230-0232 0234-0239 0243-0246 0248-0250 0254-0256 0259 0262-0265 0267-0273 0276-0281 0283 0284 0287
(3) MSN by configuration
MSN CONFIGURATION 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048 0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060 0061 0062 0063 0064 0066 0067 0068 0069 0070 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0086 0087 0089 0091 0092 0093 0094 0095 0096 0097 0098 0099 0100 0101 0102 0103 0104 0105 0106 0107 0109 0111 0112 0113 0114 0115 0116 0120 0121 0122 0124 0126 0127 0128 0130 0132 0134 0135 0136 0137 0138 0140 0142 0144 0145 0146 0148 0149 0150 0151 0154 0155 0157 0158 0159 0161 0162 0163 0165 0167 0168 0170 0172 0173 0175 0177 0179 0180 0181 0183 0186 0187 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200 0201 0202 0203 0204 0205 0207 0208 0209 0210 0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0223 0224 0226 0227 0228 0230 0231 0232 0234 0235 0236 0237 0238 0239 0243 0244 0245 0246 0248 0249 0250 0254 0255 0256 0259 0262 0263 0264 0265 0267 0268 0269 0270 0271 0272 0273 0276 0277 0278 0279 0280 0281 0283 0284 0287 001
(4) Configuration definition
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 7 Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.
B. CONCURRENT REQUIREMENTS None C. REASON
(1) History In production line, one too deep spot face was detected on pylon Rib 9 at lower flange bolting with the lower spar. During root cause investigation it has been noticed that other areas could be potentially affected. A too deep spot face on any of both external Rib 9 holes leads to a reduced fatigue life with a potential unsafe condition that cannot be ruled out. A production quality check has been conducted to conclude that the batch of aircraft included in the applicability list of this Service Bulletin are potentially impacted.
(2) Objective/Action The objective of this Inspection Service Bulletin is to detect the potential too deep spot faces on the Pylon Rib 9 (2 bolts per pylon), to provide the inspection tasks and to contact Airbus with the inspection results thru inspection report sheet.
(3) Advantages The implementation of this Service Bulletin on the affected A/C will avoid further repairs to be necessary to be performed due to a reduced fatigue life of the pylon attachment.
(4) Operational/Maintenance Consequences None D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9 1 Do a Special Detailed Inspection of the Spot Faces on Rib 9 LH 2 Do a Special Detailed Inspection of the Spot Faces on Rib 9 RH 3 Complete the Inspection Report E. COMPLIANCE
(1) Classification MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Union Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the thresholds given but reference should be made to the AD for confirmation of the mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done as defined in the below table:
NOTE: It is recommended to perform this Service Bulletin at the opportunity of an engine overhaul or engine replacement.
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 8 T able 01, CONF ALL — Do a Special Detailed Inspection (SDI) of the condition of the spot faces.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL All Aircraft Do a Special Detailed Inspection (SDI) of the condition of the spot faces 18000 Flight Cycle(s) from aircraft entry into service.
None None One or both of the spot faces are in bad condition Contact AIRBUS and follow their instructions Before next flight None None The spot faces are in good condition Do an SDI of the spot face depths with GO- NoGO Gauge No. 1. Continue to T able 02.
Before next flight None None T able 02, CONF ALL — Do an SDI of the spot face depths with GO-NoGO Gauge No. 1.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL The spot faces are in good condition Use GO-NoGO Gauge No. 1 to measure the spot face depths Before next flight None None GO is confirmed when GO- NoGO Gauge No. 1 is used Send report to AIRBUS Upon completion of inspection None None AND None None None No further action None None None GO is not confirmed when GO-NoGO Gauge No. 1 is used Do an SDI of the spot faces depths with GO- NoGO Gauge No. 2. Continue to T able 03.
Before next flight None None T able 03, CONF ALL — Do an SDI of the spot face depths with GO-NoGO Gauge No. 2.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL GO is not confirmed when GO-NoGO Gauge No. 1 is used Use GO-NoGO Gauge No. 2 to measure the spot face depths Before next flight None None GO is confirmed when GO- Get a picture of the Go- Upon completion of inspection None None
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 9
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL NoGO Gauge No. 2 is used NoGO Gauge No. 2 installed AND None None None Send report to AIRBUS Upon completion of inspection None None AND None None None Contact AIRBUS for more inspections to be done Upon completion of inspection None None AND None None None Do more inspections provided by Airbus 3000 Flight Cycle(s) from completion of inspection None None GO is not confirmed when GO-NoGO Gauge No. 2 is used Get a picture of the Go- NoGO Gauge No. 2 installed Upon completion of inspection None None AND None None None Do an SDI of the spot faces depths with GO- NoGO Gauge No. 3. Continue to T able 04.
Before next flight None None T able 04, CONF ALL — Do an SDI of the spot face depths with GO-NoGO Gauge No. 3.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL GO is not confirmed when GO-NoGO Gauge No. 2 is used Use GO-NoGO Gauge No. 3 to measure the spot face depths Before next flight None None GO is confirmed when GO- NoGO Gauge No. 3 is used Get a picture of the Go- NoGO Gauge No. 3 installed Upon completion of inspection None None AND None None None Send report to AIRBUS Upon completion of inspection None None AND None None None Contact AIRBUS for more inspections to be done Upon completion of inspection None None AND None None None
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 10
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL Do more inspections provided by Airbus 3000 Flight Cycle(s) from Completion of inspection None None GO is not confirmed when GO-NoGO Gauge No. 3 is used Get a picture of the Go- NoGO Gauge No. 3 installed Upon completion of inspection None None AND None None None Contact AIRBUS with report and follow their instructions Before next flight None None F. APPROVAL The technical content of this document is approved under the authority of the Design Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.
G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9
PREPARATION Job Set-up 1.00 h Get Access to Rib 9 LH 0.50 h Get Access to Rib 9 RH 0.50 h
PROCEDURE Do a Special Detailed Inspection of the Spot Faces on Rib 9 LH
1.00 h Do a Special Detailed Inspection of the Spot Faces on Rib 9 RH
1.00 h Complete the Inspection Report 0.25 h
PREPARATION FOR TEST None TEST None
CLOSE-UP
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 11 Close Access to Rib 9 LH 1.00 h Close Access to Rib 9 RH 1.00 h Close-up 1.00 h TOTAL MAN-HOURS 7.25 h ELAPSED TIME (HOURS) 4.75 h NOTE: For an explanation of the man-hours and elapsed time, refer to the Gantt Chart given in Appendix A.
H. WEIGHT AND BALANCE Not changed I. ELECTRICAL LOAD DATA Not changed J. REFERENCES
(1) Inspection of Rib 9
(a) T ask set A350-A-54-XX-P011-01000-93BA-A Inspection of Rib 9
CONSUMABLE MATERIAL LIST (CML) See manual
ELECTRICAL STANDARD PRACTICES (ESP) A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO) A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP) A350-A-24-41-XX-00ZZZ-170Z-A A350-A-54-52-61-00ZZZ-520Z-A A350-A-54-52-61-00ZZZ-720Z-A
NON DESTRUCTIVE TEST (NDT) A350-A-51-99-XX-01ZZZ-040Z-A
SYSTEM DESCRIPTION (SD) A350-A-06-3X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
54.50.00020 K. PUBLICATION AFFECTED
TOOL EQUIPMENT MANUAL (TEM) See manual L. INDUSTRY SUPPORT INFORMATION
A350
SERVICE BULLETIN REV 00 Jul 04/24 A350-54-P011 Page 12 This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign. For detailed support, please refer to the related RIL V54M24001071.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit management department: monitored.retrofit@airbus.com.