On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 67
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0765; AD 2018-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7a5a6ac0f15c99b662ff38727273c256e77fa63174628679977afda89b10c868' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7a5a6ac0f15c99b662ff38727273c256e77fa63174628679977afda89b10c868' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
CUSTOMER SERVICES DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 1 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT otti SUBJECT: ATA 27 – Actuator Servovalve Contamination AIRCRAFT TYPE: A350 OUR REF.: A27P012-18 Rev 01 dated 29-MAY-2018 OUR PREV REF.: A27P012-18 Rev 00 dated 16-MAY-2018
0. REASON FOR REVISION This AOT is revised to:
- Update the list of suspected servocontrols in Appendix 2 Rev 1;
- Modify paragraph 4.1.1 “Accomplishment Timescale”:
oAdd compliance time for replacement of servocontrols installed after aircraft delivery;
oReplace the 3600 FH compliance time by 9 months;
- Correct typo errors.
The revised paragraphs are indicated between **BEG. REV** and **END REV**.
1. AIRCRAFT AFFECTED All A350 in-service aircraft
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix 1: Reporting sheet Appendix 2 Rev 1: List of suspected servocontrols Appendix 3: Procedure for Removal of the Servo Module of the Rudder Servocontrol ref.
P_272453_520_A0_0001_T_A Appendix 4: Procedure for Removal of the Servo Module of the Elevator Servocontrol ref.
P_273453_520_A0_0001_T_A Appendix 5: Procedure for Installation of the Servo Module of the Rudder Servocontrol P_272453_720_A0_0001_T_A Appendix 6: Procedure for Installation of the Servo Module of the Elevator Servocontrol ref.
P_273453_720_A0_0001_T_A
2.2 REFERENCES Ref.1: Technical Follow-Up (TFU) reference 27.34.00.020 – Actuator Servovalve Contamination Ref 2: Retrofit Information Letter (RIL) reference V27M18003804
3. REASON
3.1 FACTS Two in-service cases of actuator uncommanded motion were experienced on A350 aircraft:
- One case on Elevator Servo-control (SC): Actuator runaway was detected in flight with DM F/CTL ELEVATOR ACTUATOR. The fault was not confirmed on ground and occurred on 4 different flights
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 2 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT before rectification. The adjacent EHA actuated the surface for the rest of the flight, with no operational impact until landing.
- One case on Spoiler Electrical Backup Hydraulic Actuator (EBHA): Issue occurred on ground after engine start with NOGO DM F/CTL SPLR HYD MECH. The spoiler surface was fully extended.
For both events, the respective faulty actuators were replaced.
3.2 INVESTIGATION Investigations performed in Moog’s shop revealed that both events were caused by Foreign Object Debris (FOD) blocking a receiver port inside the Electro Hydraulic Servo Valve (EHSV). EHSV is a component fitted on the servocontrol and EBHA Servo Module (SVM).
In both cases, materials found in the EHSV first stage were consistent with debris generated by rework activity during manufacturing process.
A review of Moog EHSV production records showed that a total of 279 in-service actuators are fitted with reworked SVM (spoiler EBHA, spoiler, aileron, elevator and rudder servocontrols), in addition to 25 suspected actuators delivered as spares.
**BEG REV** Among these units, there are 29 elevator servocontrols and 44 rudder servocontrols, including spares.
**END REV**
3.3 CONSEQUENCES FOD in an EHSV impacts the actuator behaviour and may cause an un-commanded actuator movement or an unresponsive actuator while in active mode.
In case of a single failure, the flight control systems reconfigure the actuation of the associated surfaces.
**BEG. REV** For Rudder and Elevator servocontrols, this failure mode, in combination with other failures, may lead to significant impact on Aircraft control, thus requires corrective action described in paragraph 4.
For Spoiler EBHA/servocontrols and Aileron servocontrols, no action is required in this AOT on these positions.
Further action may follow.
**END REV**
3.4 AIM The aim of this AOT is to:
Perform a mapping of the rudder and elevator servocontrols units installed on aircraft and, Replace suspected EHSV through replacement of the complete servocontrol (SC std. -018) or through the SVM replacement (SC std. -020 or -025)
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE **BEG REV** It is requested to apply the following procedure (paragraph 4.2) For aircraft having accumulated less than 1200 FH at issuance date of this AOT
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 3 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT within 1200 FH since AC Entry Into Service, or within one month from this AOT issuance, whichever occurs later, For aircraft having accumulated more than 1200 FH at issuance date of this AOT within 9 months from AOT issuance date, Servocontrols installed after aircraft delivery, with less than 1200 FH since installation at issuance date of this AOT and listed in the table provided in Appendix 2 Rev 1 are to be replaced within 1200 FH from installation or within one month from this AOT issuance, whichever occurs later, Servocontrols installed after aircraft delivery, with more than 1200 FH since installation at issuance date of this AOT and listed in the table provided in Appendix 2 Rev 1 are to be replaced within 9 months from AOT issuance date.
**END REV**
4.1.2 MANPOWER For each suspected EHSV identified in the mapping phase, the time to perform the replacement is:
- For Elevator SC PN CA67005-018 and Rudder SC CA67007-018, SVM is not Line Replaceable Item (LRI) and complete SC is to be replaced:
oaccess opening/closing: 2 hours elapsed time oSC replacement: 3 hours elapsed time
- For Elevator SC PN CA67005-020/-025 and Rudder SC CA67007-020/-025, SVM can be replaced solely:
oaccess opening/closing: 2 hours elapsed time oSVM replacement: 1 hour elapsed time
4.2 DESCRIPTION The following procedure consists in:
1. Performing the mapping of rudder (FIN 1CY & 2CY) and elevator (FIN 1CT1 & 1CT2) SC installed on aircraft and as spare and report to Airbus via the reporting sheet (Appendix 1)
2. Replacing all suspected EHSV via replacement of the SVM or complete actuator on aircraft
3. Returning to shop all actuators fitted with suspected EHSV and present in spare stock
4.2.1. MAPPING OF SUSPECTED SERVOCONTROLS For traceability and retrofit organisation purposes, operators are requested to send the mapping reporting sheet as soon as the PN and SN have been identified.
4.2.1.1 ON AIRCRAFT **BEG REV**
a. Check, in the aircraft records, the PN and SN of the rudder SC (FIN 1CY & 2CY) and elevator SC (FIN 1CT1 & 1CT2).
Note: If a doubt exists on any unit information, a visual check on aircraft is required to ensure accuracy of the reported data.
b. Check if the installed servocontrols are installed since delivery of the aircraft – if not, report accumulated FH since installation at the time of issuance of this AOT.
c. Check if the servocontrols installed on aircraft are listed in the table of suspected units (Appendix 2 Rev 1).
d. In case a servocontrol is listed in Appendix 2 Rev 1 refer to paragraph 4.2.2.1.
e. Send the reporting sheet (Appendix 1) to Airbus as per paragraph 7 requirements.
**END REV**
4.2.1.2 SPARE STOCK
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 4 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT **BEG REV**
a. For any spare Rudder and Elevator Servocontrol, check PN and SN.
Note: if a doubt exists on any unit information, a visual check on actuator is required to ensure accuracy of the reported data.
b. In case a servocontrol is listed in Appendix 2 Rev 1, refer to paragraph 4.2.2.2
c. Send the reporting sheet (Appendix 1) to Airbus as per paragraph 7 requirements.
**END REV**
4.2.2 REPLACEMENT OF SUSPECTED SERVOCONTROLS
4.2.2.1 ON AIRCRAFT NOTE: AIRBUS recommend not working on both hydraulic systems during the same maintenance input with the same maintenance personnel. This is to make sure that a possible maintenance error on one system is not repeated on a different system. A maintenance error on more than one hydraulic system can cause system failure on multiple systems. If maintenance is necessary on more than one system at the same time and involves lines / components disconnection, different maintenance personnel must be used for each system. If maintenance needs to be performed on both hydraulic systems at the same time a special check by a third person shall be performed to verify proper bleeding, torques and locking of bolts and nuts have been applied, this is in addition to the leak check of the pressurized system. Regarding hydraulic system bleeding, this could be carried out by means of a hydraulic ground cart. Engine run is requested if maintenance action has been done on hydraulic system located on the engine area **BEG REV** In case a servocontrol installed on aircraft is listed in the table provided in Appendix 2 Rev 1, apply the following corrective action within compliance times listed in paragraph 4.1.1:
**END REV**
- For elevator SC PN CA67005-018:
oRemove the servocontrol as per:
MP A350-A-27-34-53-00ZZZ-520A-A - Removal of the Elevator Servo Control with the Elevator-Actuator Holding Collar MP A350-A-27-34-53-00ZZZ-520C-A - Removal of the Elevator Servo Control with the Elevator Actuator Platform MP A350-A-27-34-53-00ZZZ-520B-A - Removal of the Elevator Servo Control without the Ground Support Equipment (GSE) oInstall new servocontrol as per:
MP A350-A-27-34-53-00ZZZ-720A-A - Installation of the Elevator Servo Control with the Elevator-Actuator Holding Collar MP A350-A-27-34-53-00ZZZ-720C-A - Installation of the Elevator Servo Control with the Elevator Actuator Platform MP A350-A-27-34-53-00ZZZ-720B-A - Installation of the Elevator Servo Control without the Ground Support Equipment (GSE)
- For elevator SC PN CA67005-020 or CA67005-025:
oReplace the Servo Module (SVM) as per procedures in Appendix 4 and 6.
- For rudder SC PN CA67007-018:
oRemove the servocontrol as per:
MP A350-A-27-24-53-00ZZZ-520A-A – Removal of the Rudder Servo Control with the Turn Barrel and the Balancer, MP A350-A-27-24-53-00ZZZ-520B-A - Removal of the Rudder Servo Control with the Rudder Actuator Collar,
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 5 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT MP A350-A-27-24-53-00ZZZ-520C-A - Removal of the Rudder Servo Control without the Ground Support Equipment (GSE) oInstall new servocontrol as per:
MP A350-A-27-24-53-00ZZZ-720A-A - Installation of the Rudder Servo Control with the Turn Barrel and the Balancer MP A350-A-27-24-53-00ZZZ-720B-A - Installation of the Rudder Servo Control with the Rudder Actuator Collar MP A350-A-27-24-53-00ZZZ-720C-A - Installation of the Rudder Servo Control without the Ground Support Equipment (GSE)
- For rudder SC PN CA67007-020 or CA67007-025:
oReplace the Servo Module (SVM) as per procedures in Appendix 3 and 5.
Send the removed part to Moog shop for modification.
SC spares availability and location have been reviewed and secured with MOOG.
Note: SVM is defined as LRI on actuator -20 and -25 only. Procedures are attached as appendix 3, 4, 5 and 6 and are to be used in the frame of this AOT only.
4.2.2.2 IN SPARE STOCK **BEG REV** Unless reworked after the issuance date of this AOT (refer to EASA Form 1), any spare Servocontrol listed in Appendix 2 Rev 1 are not to be installed on aircraft; affected parts are to be sent to Moog shop for modification (SVM rework identifiable via a ‘R’ mark after the PN).
**END REV**
4.3 SPARES AND TOOLING No specific tooling or component except those listed in procedures paragraph 4.2.2.1 and in Appendix 3, 4, 5 and 6 are required to perform this AOT instructions.
Nevertheless, in case of SVM replacement as per procedures given in Appendix 3, 4, 5 and 6, component Tribolube-36RPC grease (or equivalent MIL-PRF-27617 Type I grease) is required. If necessary, this component is commercially available from Moog.
Units removed are to be sent to Moog shop at the following address:
Moog Aircraft Group (CAGE code: 94697) Plant 24, 6860 Seneca Street, Elma, NY 14059, USA Email: CASC@moog.com
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN Follow-up of this AOT will be provided through TFU ref 1.
5.2 IMPACTED DOCUMENTATION N/A
6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A27P012-18 Rev 01 Page 6 of 6 Date: 29-MAY-2018 © AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT This AOT may be enforced by an Airworthiness Directive.
7. REPORTING Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain and ATA 27-00.
As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to be addressed to Airbus Customer Services through the generic e-mail address:
inspection.results@airbus.com.
Retrofit will be performed through the monitored retrofit described in RIL Ref 2.
Best Regards, Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES Stéphane GOSSELIN VICE PRESIDENT A350 PROGRAMME
CUSTOMER SERVICES
© Airbus SAS, 2012. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
From Customer Services Directorate – SEEL3 Date May 2018 Reference RS-A27P012-18 Page 1 From:
Customer Services Directorate – SEEL3 Our reference:
RS-A27P012-18 AOT A27P012-18 - AOT A27P012-18 – Appendix 1 – Reporting Sheet Aircraft data
Operator: _____________ MSN: _____________ Flight Cycles: _____________ Flight Hours: _____________
Servocontrol Position PN/SN Installed since Delivery Inspection date Unit suspect-ed Unit Replaced Replacement unit Replacement unit PN/SN
RUDDER YELLOW (1CY) PN : ___________ SN : ___________ Y□ N□ If No, FH accumulated at AOT date :________________ Y□ N□ Y□ N□ SC□ SVM□ PN : ___________ SN : ___________
RUDDER GREEN (2CY) PN : ___________ SN : ___________ Y□ N□ If No, FH accumulated at AOT date :________________
Y□ N□ Y□ N□ SC□ SVM□ PN : ___________ SN : ___________
LH ELEVATOR (1CT1) PN : ___________ SN : ___________ Y□ N□ If No, FH accumulated at AOT date :________________ Y□ N□ Y□ N□ SC□ SVM□ PN : ___________ SN : ___________
RH ELEVATOR (1CT2) PN : ___________ SN : ___________ Y□ N□ If No, FH accumulated at AOT date :________________ Y□ N□ Y□ N□ SC□ SVM□ PN : ___________ SN : ___________
© Airbus SAS, 2012. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reprodu any purpose other than that for which it is supplied.
From Customer Services Directorate – SEEL3 Date May 2018 Reference Act-SN-Table-A27P012-18 Rev 1 Page 1 From:
Customer Services Directorate – SEEL3 Our reference:
Act-SN-Table-A27P012-18 Rev 1
AOT A27P012-18 – Appendix 2 Rev 1 List of suspected servocontrols
Elevator servocontrols
Rudder servocontrols PN SN
PN SN CA67005-018 1000517
CA67007-018 1200505 CA67005-018 1000521
CA67007-018 1200510 CA67005-018 1000531
CA67007-018 1200514 CA67005-018 1000545
CA67007-018 1200515 CA67005-018 1000552
CA67007-018 1200520 CA67005-020 1000567
CA67007-018 1200524 CA67005-020 1000589
CA67007-018 1200556 CA67005-020 1000598
CA67007-018 1200558 CA67005-020 1000616
CA67007-018 1200574 CA67005-020 1000629
CA67007-018 1200577 CA67005-020 1000636
CA67007-018 1200583 CA67005-020 1000640
CA67007-020 1200591 CA67005-020 1000649
CA67007-020 1200606 CA67005-020 1000660
CA67007-020 1200610 CA67005-020 1000671
CA67007-020 1200611 CA67005-020 1000673
CA67007-020 1200628 CA67005-020 1000677
CA67007-020 1200629 CA67005-025 1000693
CA67007-020 1200643 CA67005-025 1000734
CA67007-020 1200644 CA67005-025 1000739
CA67007-020 1200645 CA67005-025 1000741
CA67007-020 1200648 CA67005-020 1000752
CA67007-020 1200651 CA67005-025 1000787
CA67007-020 1200658 CA67005-025 1000813
CA67007-020 1200671 CA67005-025 1000816
CA67007-020 1200672 CA67005-025 1000821
CA67007-020 1200677 CA67005-025 1000838
CA67007-020 1200678 CA67005-025 1000850
CA67007-020 1200684 CA67005-025 1000922
CA67007-025 1200689
CA67007-020 1200691
CA67007-020 1200696
CA67007-025 1200736
CA67007-025 1200744
CA67007-025 1200747
CA67007-025 1200755
CA67007-025 1200757
CA67007-025 1200795
CA67007-025 1200801
CA67007-025 1200830
CA67007-025 1200835
CA67007-025 1200857
CA67007-025 1200861
CA67007-025 1200874
CA67007-025 1200897
TASK (solution) ID_P_272453_520_A0_0001_T_A
DATA MODULE NOT PUBLISHED Removal of the Servo Module of the Rudder Servocontrol FIN:
101-CY— (SERVO MODULE-SERVO CTL,RUD Y) 101CY 102-CY— (SERVO MODULE-SERVO CTL,RUD G) 102CY For Configuration MPM-108927L42767/, PGM-XW/ For MSN 00005-00058 00060-00070 00072-00107 00109-00130 00132-0 0138 00140-00151 00153-00155 00157-00165 00167-00170 00172-0 0193 00195-00221 00223-00241 00243-00252 00254-00274 00276-00287 00289-0 0340 00342-00348 00350-00363 00366-00372 00374-00375 00377-00378 00380-0 0384 00386-00386 00390-00390 09801-09801 WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING
NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
– THE FLIGHT CONTROLS – THE FLIGHT CONTROL SURFACES – THE LANDING GEAR AND RELATED DOORS – THE CARGO DOOR – THE ENGINES – OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING:
MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE CLEAR. MOVEMENT OF THE FLIGHT
CONTROL SURFACES CAN CAUSE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAFT OR EQUIPMENT.
WARNING:
DO NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES.
HOT PARTS CAN CAUSE AN INJURY.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES. THESE COMPONENTS ARE MADE OF CARBON FIBER REINFORCED PLASTIC.
CAUTION:
IF THERE ARE GUSTS OF WIND, DO THIS PROCEDURE IN
A HANGAR TO PREVENT UNWANTED MOVEMENT OF THE COMPONENT. SUCH MOVEMENT CAN CAUSE DAMAGE.
1. GENERAL ID_COMM_INFO_0001_P_272453_520_A0_0001_T_A For Configuration PGM-XW/ 1
For MSN 00005-00058 00060-00070 00072-00107 00109-00130 00132-0 0138 00140-00151 00153-00155 00157-00165 00167-00170 00172-0 0193 00195-00221 00223-00241 00243-00252 00254-00274 00276-0 0287 00289-00340 00342-00348 00350-00363 00366-00372 00374-0 0375 00377-00378 00380-00384 00386-00386 00390-00390 09801-0 9801 A. Reason for the job Self-explanatory B. Additional information Self-explanatory C. Component weight Self-explanatory
2. JOB SET-UP INFORMATION Tool List STT001410000010 (SPATULA - NON METALLIC) F6198 STT001860000010 (WARNING NOTICE(S)) F6198 STT001490000010 (STRAP - ATTACHMENT) F6198 STT001080000010 (PLUG - BLANKING) F6198 STT000800000120 (LIGHT SOURCE - TORCH) F6198 STT001300000030 (SCREWDRIVER - PHILLIPS HEAD) F6198 STT001220000010 (SAFETY BARRIER(S)) F6198 STT000230000010 (CAP - BLANKING) F6198 STT000350000060 (CONTAINER 3 L(3/4 USGAL)) F6198 STT000230000200 (CAP - BLANKING, HYDRAULIC) F6198 STT000010000160 (ACCESS PLATFORM 12M (40 FT) - ADJUSTABLE) F6198 98F27201002000 (SAFETY PIN-RUDDER) F6198 List of Consumable Materials 14SBA1 (Textile_Lint free Cotton -) Access List 325CL Referenced Information Ref. TASK P_450000_132_00_T Get Access to the "MAINTENANCE HOME PAGE" and to the Maintenance Applications Ref. TASK P_120000_170_02_T Fall Restraint Systems for the Safety of Maintenance Personnel and General Precautions for Work at H eight Ref. TASK P_120000_170_00_T Get Access / Close Access to the Avionics Compartment Ref. TASK P_244100_761_00_T Energize the Aircraft Electrical Circu its from External Power Receptacle 1 Ref. TASK P_247100_170_00_T Get Access to "C/B Management" Ref. TASK P_316300_132_00_T CDS Start Procedure Ref. TASK P_290000_562_04_T Put the Hydraulic Systems in the Depressurized-for-Maintenance Configuration before Main tenance with Disconnection of Hydraulic Lines (Reservoir Depressurize d) Ref. TASK P_290000_170_02_T General Rules for Removal and Installat ion Procedures for the Hydraulic Systems Ref. TASK P_553300_132_00_T Open the Trailing Edge (TE) Access Panel of the Vertical Stabilizer 2
Ref. TASK P_290000_170_00_T Hydraulic Safety Procedures
3. JOB SET-UP SUBTASK (solution) ID_P272453_101_0008_0001_ST For Configuration PGM-XW/ For MSN 00005-00058 00060-00070 00072-00107 00109-00130 00132-00138 00140-00151 00153-00155 00157-00165 00167-00170 00172-0 0193 00195-00221 00223-00241 00243-00252 00254-00274 00276-0 0287 00289-00340 00342-00348 00350-00363 00366-00372 00374-0 0375 00377-00378 00380-00384 00386-00386 00390-00390 09801-0 9801 A. Aircraft Maintenance Configuration
(1) This procedure is only applicable to the aircrafts that h ave rudder servocontrol standard 020 or more. Refer to the part number s uffix written on the identification plate to know the standard of th e rudder servocontrol Ref Fig P_MP_272453_14_0001—Servo Module of the Rudder Servocontrol.
If the procedure is not applicable to your aircraft, continu e the initial Fault Isolation procedure.
(2) Energize the aircraft electrical circuits Ref. TASK P_244100_761_00_T Energize the Aircraft Electrical Circu its from External Power Receptacle 1 .
(3) Put the hydraulic systems in the depressurized-for-mainte nance configuration Ref. TASK P_290000_562_04_T Put the Hydraulic Systems in the Depressurized-for-Maintenance Configuration before Main tenance with Disconnection of Hydraulic Lines (Reservoir Depressurize d).
(4) Make sure that the CDS is in operation Ref. TASK P_316300_132_00_T CDS Start Procedure .
(5) On the center pedestal, on panel 135VM, push the F/CTL key (on the ECAM display, on the SD, the “F/CTL” page comes into view).
(6) On the SD, on the “F/CTL” page, make sure that the RUDDER TR IM indicator shows 0 degrees.
If not, on the center pedestal, on the RUDDER TRIM section of p anel 115VM, push the RESET pushbutton switch.
(7) Make sure that the CAPT and F/O rudder pedals are in the neutral position.
(8) On a maintenance terminal, get access to the “MAINTENANCE HO ME PAGE” Ref. TASK P_450000_132_00_T Get Access to the "MAINTENANCE HOME PAGE" and to the Maintenance Applications .
(9) On the “MAINTENANCE HOME PAGE”, select “C/B Management” Ref. TASK P_247100_170_00_T Get Access to "C/B Management" .
SUBTASK (solution) ID_P272453_865_0004_0001_ST For Configuration PGM-XW/ 3
For MSN 00005-00058 00060-00070 00072-00107 00109-00130 00132-00138 00140-00151 00153-00155 00157-00165 00167-00170 00172-0 0193 00195-00221 00223-00241 00243-00252 00254-00274 00276-0 0287 00289-00340 00342-00348 00350-00363 00366-00372 00374-0 0375 00377-00378 00380-00384 00386-00386 00390-00390 09801-0 9801 B. Open, safety/lock and tag this(these) circuit breaker(s):
Circuit Breaker Designation 2001CE C/B-PRIM 1 2002CE C/B-PRIM 2 2003CE C/B-SEC 1 2004CE C/B-SEC 2 1005CE C/B-PRIM 3 1007CE C/B-SEC 3 3141CY SSPC-PFTU CHAN1 3228CY C/B-PFTU CHAN2 3135CD SSPC-RUDDER PEDAL LOCK SUBTASK (solution) ID_P272453_101_0051_0001_ST For Configuration PGM-XW/ For MSN 00005-00058 00060-00070 00072-00107 00109-00130 00132-00138 00140-00151 00153-00155 00157-00165 00167-00170 00172-0 0193 00195-00221 00223-00241 00243-00252 00254-00274 00276-0 0287 00289-00340 00342-00348 00350-00363 00366-00372 00374-0 0375 00377-00378 00380-00384 00386-00386 00390-00390 09801-0 9801 C. Aircraft Maintenance Configuration
(1) On the EPDC2 inner face, at location 2CG03, open, safety/ lock and tag reset switch 1656XZ.
• On the “C/B Management” page, make sure that RCCB 2034CY is open.
SUBTASK (solution) ID_P272453_101_0009_0001_ST For Configuration PGM-XW/ For MSN 00005-00058 00060-00064 00066-00070 00072-00087 00089-00101 00103-00107 00109-00109 00111-00117 00119-00124 00126-0 0130 00132-00138 00140-00140 00142-00151 00153-00155 00157-0 0160 00162-00165 00167-00168 00170-00170 00172-00187 00189-0 0193 00195-00205 00207-00214 00216-00221 00223-00224 00226-0 0228 00230-00232 00234-00240 00243-00251 00254-00257 00259-0 0261 00263-00265 00267-00273 00276-00285 00287-00287 00289-0 0289 00291-00295 00297-00297 00299-00305 00307-00314 00316-0 0318 00320-00325 00327-00329 00331-00331 00333-00335 00337-0 0339 00343-00345 00347-00348 00351-00355 00357-00361 00363-0 0363 00366-00367 00369-00372 00375-00375 00377-00378 00381-0 0381 00383-00384 09801-09801 D. Safety Precautions 4