TextOCR
This text is OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9c19cff034b82ddabf931529dbefa2458331011036fd6a5cd9b80a128d821523' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9c19cff034b82ddabf931529dbefa2458331011036fd6a5cd9b80a128d821523' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AOT_71A2036_00[1]. txt
ALL OPERATORS TELEX - ALL OPERATORS TELEX SUBJECT: A310 GE CF6-80C2 - ATA 71 - Inspection and replacement of forward engine mount cast yoke OUR REF: AOT A310-71A2036 dated 30 March 2010
1. AIRCRAFT AFFECTED All 310 CF6-80C2 powered aircraft
2. REFERENCED DOCUMENTATION
2.1 ESPM task 20-55-00 Cleaning (AIRBUS)
2.2 AMM task 24-00-00 PB301 General servicing
2.3 AMM task 71-13-00 PB301 Cowl doors - Servicing
2.4 AMM task 71-21-00 PB401 Engine torward mount - Removal/Installation
2.5 CMMm 71-21-01 Forward mount assembly
2.6 GENERAL ELECTRIC Service Bulletin No. CF6-80C2 72-0222
2.7 AMM task 71-00-00 PB401 General - Removal/Installation
3. REASON
3.1 FACTS In the frame of the Extended Service Goal (ESG) activities on GE CF6 engine mounts, it has been demonstrated that one location on the CF6- 80C2 forward engine mounts does not meet the ESG objective (45000 There are 3 types of yokes in service: skinny cast yoke, strengthened cast yoke and forged yoke versions. The forged yoke mount was pescess was changed to increase fatigue ie of the yoke. designed to increase fatique life of the The manufacturing Post-certification analysis to support ESG shows that the skinny cast yoke does not meet this objective.
Analysis requires that the skinny cast yokes (P/N 9383M43G08 or 9383M43G09 or 9383M43G10 or 9383M43G11) must be replaced within 7000FC after inspection.
3.2 CONSEQUENCES Yoke failure could adversely affect the structural integrity of the forward engine mount.
3.3 AIM The aim of this AOT is to perform a one time detailed inspection of the forward engine mount yokes of GE CF6-80C2 powered aircraft and to replace by a forged yoke with improved fatigue life if skinny cast yoke installed.
In case of replacement of . the skinny cast yoke, the GE CF6-80C2 Bulletin 72-0222 is to be completed if not already accomplished.
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 PLANNING For each engine, do a General Visual Inspection (GVI) for the P/N of Page 1
AOT_71A2036_00[1] .txt 9383M43G08 or 9383M43G09 or 9383M43G10 or 9383M4 next 400FC after the torward engine mount yoke and, if found skinny (i.e. P/N do a Detailed Inspection (DET) as per paragraph 4.2 within the next this AOT issuance date.
within 7000FC from Detailed Inspection, replace the skinny cast yoke by a forged one as per §4.2.4.
4.1.2 MANPOWER From 5 to 283 man-hours and from 2.5 to 46.5 elapsed time hours are required, depending on findings.
4.2 DESCRIPTION Apply the following instructions for both engines.
4.2.1 General warning WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR MODIFICATIONS,
ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE.
TO DO THIS:
PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS NECESSARY ON WIRING AND COMPONENTS.
REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IN CASE OF CONTAMINATION REFER TO ESPM TASK REF 2.1.
4.2.2 Inspection for the P/N of the forward engine mount yoke
4.2.2.a. Preparation Make sure that the aircraft is electrically grounded (refer to AMM task ref 2.2).
Put the access platform(s) in position.
Open the fan cowl doors 435AL and 436AR for engine 1 and 445AL and ee test verse Land 452AR for engine 1 and 461AL and 462AR for engine 2 (refer to AMM task ref 2.3).
4.2.2.b. Procedure Do a General Visual Inspection (GVI) for the P/N of the forward engine mount yoke (refer to Appendix 01 Figure 1 and Figure 2).
If P/N 9383M43G08 or 9383M43G09 or 9383M43G10 or 9383M43G11 1S not installed, complete the inspection report (Appendix 02). No further action is necessary.
It P/N 9383M43G08 or 9383M43G09 or 9383M43G10 or 9383M43G11 is installed, do a Detailed Inspection (DET) for full rupture in the forward engine mount skinny cast yoke as per §4.2.3.
4.2.2.c. Close-up Make sure that the work areas are clean and clear of tools and other page 2
AOT_71A2036_00[1]. txt items of equipment.
Close the tan cowl doors 435AL and 436AR for engine 1 and 445AL and 446AR for engine 2 (refer to AMM task ref 2.3).
close the thrust reverser cowl doors 451AL and 452AR for engine 1 and Restore the system and the aireraft too nak reating condition.
4.2.3 Inspection of the Forward Engine Mount skinny Cast Yoke
4.2.3.a. Preparation Make sure that the aircraft is electrically grounded (refer to AMM task ref 2.2).
Put the access platform(s) in position.
Open the fan cowl doors 435AL and 436AR for engine 1 and 445AL and 446AR for engine 2 (refer to AMM task ref 2.3).
open the thrust reverser cowl doors 451AL and 452AR for engine 1 and 461AL and 462AR for engine 2 (refer to AMM task ref 2.3).
4.2.3.b. Procedure Refer to Appendix 01 Figure 1 and Figure 2 and Appendix 04.
Do a Detailed Inspection (DET) of the forward engine mount skinny cast yoke in the specified area shown on Appendix 01 Figure 2.
- If the skinny cast yoke is found fully ruptured, contact Airbus at the following address for investigation and special workscope. In addition, the forward mount assembly must be removed and replaced before next flight:
_aure Dup land, SEEE3 Customer Services Phone: +33 (0) 5 61 18 20 24 Fax: +33 (0) 5 61 93 36 14 Mailto: laure.dupland@airbus.com skinny cast yoke is not ruptured, attach a Movement Traceability Sheet (MTS) to the skinny cast yoke (Ct. Appendix 03).
The skinny cast yoke must be replaced by a forged yoke (P/N 1806M79G01) as per §4.2.4 before having accumulated 7000FC since the MTS creation.
vorkscope. In addition, the torward mount assembly must be removed and replaced before next flight:
Laure Dupland, SEEES Customer Services Phone: +33 (0)5 61 18 20 24 Fax: +33 (0) 5 61 93 36 14 Mailto: laure.dupland@airbus.com
4.2.3.c. Close-up Make sure that the work areas are clean and clear of tools and other items of equipment.
Close the fan cowl doors 435AL and 436AR for engine 1 and 445AL and 446AR for engine 2 (refer to AMM task ref 2.3).
Renove the aces platform a refer to Mah task ref 2.95 engine 1 and
AOT_/ 1A2036_001-1. txt Restore the systems and the aircraft to normal operating condition.
4.2.4 Replacement of skinny cast yoke by a forged one
4.2.4.a. Preparation Make sure that the aircraft is electrically grounded (refer to AMM task ref 2.2).
Po the papasation. poocedure as specified in the removal/installation Do the preparation procedure as of the forward engine mount (refer to AMM task ref 2.4).
4.2.4.b. Procedure Remove the skinny cast yoke (refer to AMM task ref 2.4 and CMMm ref
2.5) and install a forged one P/N 1806M79G01 (refer to AMM task ref
2.4 and CMMm ref 2.5).
If GE VSB 72-0222 has not been already accomplished, modify the forward engine mount system (see ref 2.6).
4.2.4.c Test Install the power plant (refer to AMM task ref 2.7).
Do the test procedure as specified after the installation of the power plant (refer to AMM task ref 2.7).
4.2.4.d Close-up Remove the access platform(s).
4.3 MATERIAL INFORMATION
4.3.1 Material - Price and availability Forged yokes (P/N 1806M79G01) can be procured from GE at the following address or from any other approved sources:
GENERAL ELECTRIC Manager, Customer Account Support GE Engine Services Distribution, L.L.C.
Product Support Operation One Neumann way Room 115 Cincinnati, OH 45215-1998 USA http://customer.geae.com Procurement terms for the equipment must be negotiated with the equipment supplier.
The quantity of yokes to order depends on the result of the inspection.
4.3.2 Tooling To accomplish this AOT, it is necessary to use the tools listed in the AMM task ref 2.4.
4.4 NOTE From this AOT issuance, a skinny cast yoke (P/N 9383M43G08 or Page 4
AOT_71A2036_00[1] . txt 9383M43G09 or 9383M43G10 or 9383M43G11) can be re-installed on CF6- 80C2 A310 equipped aircraft only if a MTS (Movement Traceability Sheet) is attached and if it has accumulated less than 7000FC since the MTS creation.
A caution note will be introduced in the AMM to avoid re-installation of a skinny cast yoke without MTS.
5. FLOW CHART Fee Appendix 04furpose, a flow chart has been compiled accordingly
6. AOT APPROVAL The technical content of this AOT has been approved under the authority of EASA design organization approval number EASA 21J.031.
7. REPORTING/ACKNOWLEDGMENT Operators are requested to acknowledge receipt of this AOT within 48 hours after receipt to:
MR. R. LASCOURS, =-mail: richard.lascours@airbus.com Fax: +33/ (0) 5 61 93 32 73 acknowledgement can be made through the Airbus RCSM when available.
Questions about the technical content of this AOT are to be addressed to:
MS. Laure DUPLAND, SEEE3 TEL: +33 / (0) 5 61 18 20 24 FAX: +33 / (0) 5 61 93 36 14 E-Mail: laure.dupland@airbus.com Best regards, E. VAN AELST VICE PRESIDENT A300 PROGRAMME
CUSTOMER SERVICES DIRECTORATE If you receive this message via e-mail/internet, we draw your attention to the fact that it may be monitored and/or intercepted.
Further, whilst Airbus has taken reasonable measures to ensure the integrity of this message and its contents, no warranty, whether express or implied, is given that the contents hereof conform to the original. In case of any doubt, please retrieve this document from /our SITA address or Airbus World or request that it be retransmitted Page 5
Appendix 01 - AOT 71A2036 - Figures Z 460 FWD
ENGINE MOUNT YOKE NOTE: INSPECTION AREA
• Figure 1: Forward Engine Mount Yoke
PN TO BE CHECKED
AREA TO BE
INSPECTED DI Figure 2: Area to be inspected
Appendix 02 - AOT 71A2036 - Inspection Report
INSPECTION REPORT AOT No.: A310-71A2036 DATE OF INSPECTION:
A/C MSN: INSPECTION METHOD:
FLIGHT CYCLES: • GENERAL VISUAL INSPECTION FOR P/N
• DET FOR FULL RUPTURE FLIGHT HOURS:
ENGINE 1 (LH)
YES NO SKINNY CAST YOKE (P/N 9383M43G08 OR 9383M43G09 OR 9383M43G10 OR 9383M43G11) INSTALLED?
SKINNY CAST YOKE FOUND FULLY RUPTURED?
ENGINE 2 (RH)
YES NO SKINNY CAST YOKE (P/N 9383M43G08 OR 9383M43G09 OR 9383M43G10 OR 9383M43G11) INSTALLED?
SKINNY CAST YOKE FOUND FULLY RUPTURED?
The results of the inspection must be forwarded to Airbus department SEEE3:
Laure Dupland, SEEE3 Customer Services Phone: +33 (0)5 61 18 20 24 Fax: +33 (0)5 61 93 36 14 Mailto: laure.dupland@airbus.com
Appendix 03 - AOT 71A2036 - MTS On Off DATE COMPONENT DESCRIPTION:
Reason 0:00 P/N TSI PART COMPONENT MOVEMENT TRACEABILITY SHEET CSI P/N
REMARKS S/N TSO ASSY Model MSN W TSN CSO _, PART's S/N Issue date: 04-Mar-2005 Time: 12:09 Page: 1/1 AIRCRAFT
CSN POS
ENDORSEMENT
Appendix 03 - AOT 71A2036 - MTS explanation of MTS creation aircraft or date fitted on the detail part is Date when the introduced here. part/aircraft have to be All relevant remarks on the aircraft removed from the detail part is Date when the Off DATE COMPONENT DESCRIPTION: part Nomenclature of the detail overhaul...) removal (repair, Reason for Reason the detail part Part Number o part of the detail MTS creation Time since 0100 P/N PART COMPONENT MOVEMENT TRACEABILITY SHEET part of the detail MTS creation Cycles since CSI fitted to detail part is assembly the of the Part Number P/N part is fitted the detail the assembly Number of Serial number) date/time and page (status/Issue Reference date REMARKS part is fitted the detail the assembly overhaul of Time since SIN TSO ASSY part is fitted the detail the assembly overhaul of Cycles since fitted to detall part is aircraft the Model of the Model CSO , PART's S/N
• Issue date: 04-Mar-2005 is fitted to the detail part of the aircraft Serial Number Manufacturer variant Weight Aircraft MSN W is fitted to detail part aircraft the new of the Time since TSN AIRCRAFT is fitted to detail part aircraft the of the since new Cycles CSN Time: 12:09 Page: 1/1 or ENG2) detail part (ENG1 Position of the POS part Serial Number of the detail organisation relevant quality validated/endorsed by the the MTS have to be All information stated in ENDORSEMENT
NO FURTHER ACTION (APPENDIX 02) INSPECTION REPORT SEND TO AIRBUS NO Appendix 04 - AOT 71A2036 - Flow Chart 0222 IF NOT ALREADY ACCOMPLISHED WITHIN 7000FC AND ACCOMPLISH GE SB 72- YOKE BY A FORGED YOKE (P/N 1806M79G01) REPLACE THE FORWARD ENGINE MOUNT REPORT (APPENDIX 02) SEND TO AIRBUS INSPECTION A MTS (APPENDIX 03) CREATE AND ATTACH 9383M43G11) INSTALLED? or 9383M43G10 or 9383M43G08 or 9383M43G09 SKINNY CAST YOKE (P/N 400FC IDENTIFY THE P/N WITHIN FRONT MOUNT YOKE TO INSPECTION OF THE ENGINE DO A GENERAL VISUAL RUPTURED? FULLY CAST YOKE FOR FULL RUPTURE THE SKINNY CAST YOKE INSPECTION (DET) OF DO A DETAILED YES