Other document · Airbus

No revision namedAOT_A330-29A3110 · 5 pages · 1.5 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2011-0388 (document 0007) · AD 2011-16-03

Manufacturer
Airbus
Type
All Operator Telex
Number
A330-29A3110

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 5OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '487f047d5829c3c87473415ffe415bdc6e34e5668c7195aea72fce34c6828e52'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

ALL OPERATORS TELEX - ALL OPERATORS TELEX SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT OUR REF: AOT A330-29A3110 dated 01 SEP 2009

1. AIRCRAFT AFFECTED This AOT applies Sundstrand Ram Air Turbine (RAT) Turbine-Lower Gearbox Assembly PN 766542 series and PN 1701401 series. to all A330 in service aircraft equipped with Hamilton NOTE: Operators have to distinguish the Ram Air Turbine (RAT) Module from the RAT Turbine-Lower Gearbox Assembly sub-assembly.

[f still equipped with the original RAT Turbine-Lower Gearbox Assembl!

rom delivery, aircraft MSN 1024 and subsequent are not affected by this A Quality suoy y dressed the following aircraft MaNs before deliv 1003. As sentequencao pen reblaced in service, the above-listed airera t nishe 994, 1010% 990, 9911, 1013, 1018, 1019, 1020, 1021, 1023. AS Turbine-Lower Gearbox are not affected by this AOT.

NOTE: It is the operator's responsibility to check if the original RAT Turbine-Lower Gearbox Assembly is still fitted on aircraft.

2. REFERENCED DOCUMENTATION Unit" (MPD Task 292400-03) REF 2:AMM TASK 29-24-00-720-801 "Functional Check of RAT Using Ground Test REF 3: Hamilton Sundstrand Service Bulletin ERPS06G-29-6 REF 4:AMM Task 29-24-00-869-801 'Extension of the RAT on the Ground" Assembly" REF 5:AMM Task 29-24-54-000-801 Removal of the RAT Turbine-Lower Gearbox REF 6:AMM Task 29-24-54-400-801 Installation of the RAT Turbine-Lower Gearbox Assembly" REF 7:AMM Task 29-24-00-869-802 "Retraction of the RAT on Ground"

3. REASON

3.1 FACTS Hamilton Sundstrand has discovered that some RAT were manufactured with non-conforming screws, Ret. 1 Hamilton Sundstrand CMM. The purpose of these screws is to attach the balance washers, which can have a round or a rectanqular shape depending on RAT confiquration. To date there have beer five instances of a fractured balance screw on various RAT part number contigurations. In one case, the balance washer was also tound missing. Inspection of other screws in Hamilton Sundstrand stock revealed metallographic non-conformities consistent with those of the fractured The suspect screws have been isolated to one batch from a specific applied heat treatment process, which can increase susceptibility to Analysis shows the non-conformity can be a result of the supplier's

Page 2OCROpen in PDF

brittle fracture.

3.2 CONSEQUENCES The applied heat treatment has resulted in a non-conforming screw material. The affected screws are exposed to potential fracture, with subsequent non-retention of the associated balance washer.

Detachment of the balance washer can create an unacceptable turbine imbalance.

3.3 AIM The aim of this AOT is to:

- Inform all A330 operators of the discovered nonconforming RAT screws,

- Provide operators with a procedure to check the suspect Part Numbers and Serial Numbers of the In-Service/Spare RAT Turbine Lower Gearbox Assemblies, and to replace the balance screws when affected.

per Ref.2 - Provide operators with recommendations prior to any RAT ground test as

4. SHORT TERM ACTION

4.1 AIRBUS RECOMMENDATION Airbus recommend that the actions described in paragraph 4.3. of this AOT following : be carried out at the next convenient opportunity in accordance with the

4.1.1 Identification of suspect RAT From the list of RAT Turbine-Lower Gearbox Assemblies provided in Hamilton-Sundstrand SB Ref. 3, operators must identify the RAT that are in the suspect batch.

CAUTION:

If the PN/SN of a RAT Turbine-Lower Gearbox Assembly the RAT must be considered as suspect and inspected in accordance with the cannot be identified, instructions provided in this AOT paragraph 4.3.1.

4.1.2 Inspection/replacement are requested to do the actions described in paragraph 4.3 within the For RAT Turbine-Lower Gearbox Assemblies in the suspect batch, operators following timescale:

- the next 3000 flight hours after receipt of this All Operators Telex, or - the next 8 months after receipt of this All operators Telex,

- before carrying out a RAT ground test as per Ref.2.

whichever occurs first.

Any RAT Turbine Lower Gearbox Assembly identified with a missing screw and/or a missing balance washer during the inspection has to be reworked immediately as per paragraph 4.3.

4.2 PLANNING AND MANPOWER When screws are found in place on the turbine, Airbus estimate that a Lower Gearbox Assembly. maximum of 2 man-hours are required to gain identify Hamilton Sundstrand SB Ref. 3 accomplishment on the RAT Turbine- access, replace the screws and For a RAT Turbine-Lower Gearbox Assembly with a missing balance washer, or Page 2

Page 3OCROpen in PDF

screw that cannot be completely removed, removal of the RAT Turbine-Lower Gearbox Assembly from the aircraft is required. In this case, a maximum of 6 man-hours are required for replacement of the RAT Turbine-Lower Gearbox Assembly and test on wing.

4.3 DESCRIPTION OF TASK

4.3.1. INSPECTION AND REPLACEMENT OF BALANCE SCREWS ON AIRCRAFT

1. Extend the Ram Air Turbine (RAT) as per Ref. 4 AMM Task.

2. Open, safety and tag these circuit breakers:

PANEL DESIGNATION FIN LOCATION 721VU HSMU B + PART G 6JG 10 U 722VU HSMU Y + PART G 7JG 46 X 742VU RAT STOW CTL 1JR 77 D 742VU HYD RAT EXT SOL 2 SJR 76 D 742VU RAT MAN ON 2JR 74 K

3. If the RAT Turbine-Lower Gearbox Assembly is not listed in the effectivity of the Ref. 3 Hamilton Sundstrand Service Bulletin:

a) No further action on the RAT is required. Go to paragrapr

4.3.1. (6).

"29-6": the RAT Turbine-Lower Gearbox Assembly nameplate bears the Affectivity of Ref. 3 Hamilton Sundstrand Service Bulletin, and It the RAT Turbine-Lower Gearbox Assembly is listed in the symbol

a) The Ref. 3 Hamilton Sundstrand Service Bulletin has already been applied. No further action on the RAT is required. Go to paragraph 4.3.1. (6).

the effectivity of Ref. 3 Hamilton Sundstrand service Bes etin, and the RAT Turbine-Lower Gearbox Assembly nameplate does not If the installed RAT Turbine-Lower Gearbox Assembly is listed in bear the symbol "29-6":

a) If all the balance screws are fitted on the turbine. within the timescale given in paragraph 4.1.2.:

- with the RAT installed on aircraft, replace all the balance screws on the RAT Turbine-Lower Gearbox Assembly in accordance vith the Ref. 3 Hamilton Sundstrand Service Bulletin

- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to Ref. 5 and Ref. 6 AMM Tasks) and send the affected RAT Turbine-Lower Gearbox Assembly to the vendor for application of Ref. 3 Hamilton Sundstrand Service Bulletin.

b) If one or several screws are broken and the associated balance washers are still fitted on the turbine. Before the next flight:

SE the Ref. e Hameleon sunst and service Bullet a coreane

- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to Ref. 5 and Ref. 6 AMM Tasks) and send the affected RAT Turbine-Lower Gearbox Assembly to the vendor for application of Ref. 3 Hamilton Sundstrand Service Bulletin.

c) If one or several screws and balance washers are broken, then before next flight:

Page 4OCROpen in PDF

- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to 5 and Ref. 6 AMM Tasks) and send the affected RAT Turbine-Lower Gearbox Assembly to the vendor to balance the turbine assembly and apply the Ref. 3 Hamilton Sundstrand Service Bulletin.

Remove the safety clip(s) and tag(s) and close these circuit breakers:

PANEL DESIGNATION FIN LOCATION 721VU HSMU B + PART G 6JG 10 U 722VU HSMU Y + PART G 7JG 46 x 742VU RAT STOW CTL 1JR 77 D 742VU HYD RAT EXT SOL 2 SJR 76 D 742VU RAT MAN ON 2JR 74 K Retract the Ram Air Turbine (RAT) as per Ref. 7 AMM Task.

8. Report all inspection results to Airbus in accordance with paragraph 7 of this AOT.

4.3.2. INSPECTION AND REPLACEMENT OF SCREWS ON SPARE RAT If the RAT Turbine-Lower Gearbox Assembly is not listed in the effectivity of the Ref. 3 Hamilton Service Bulletin:

- No further action on the RAT is required. Go to paragraph

4.3.2. (4).

2. If the RAT Turbine-Lower Gearbox Assembly is listed in the effectivity of Ref. 3 Hamilton Sundstrand Service Bulletin, and "29-6": the RAT Turbine-Lower Gearbox Assembly nameplate bears the symbol

- The Ref. 3 Hamilton Sundstrand Service Bulletin has already been applied. No further action on the RAT is required. Go to paragraph 4.3.2. (4).

effectivity of Ref. 3 Hamilton Service Bulletin, and theheAs Turbine-Lower Gearbox Assembly nameplate does not bear the symbol If the RAT Turbine-Lower Gearbox Assembly is listed in the

- Replace Assembly in accordance with the Ref. 3 Hamilton Service Bulletin. all the balance Screws on the RAT Turbine-Lower Gearbox

- Send the affected RAT Turbine-Lower Gearbox Assembly to the vendor tor application of Ref. 3 Hamilton Service Bulletin.

Report all inspection results to Airbus in accordance with paragraph 7 of this AOT.

4.4 MATERIAL / TOOLING Hamilton Sundstrand Service Bulletin. The material necessary for this inspection is listed in the Ref. 3 affected operators. Hamilton Sundstrand will provide balance screws free of charge to the to operator. Therefore, The number of screws required for this inspection may vary from operator in order to determine the number of screws to be ordered, operators are requested to contact their assigned Hamilton Sundstrand Commercial Spares Administrator (or fax to +1-815-226-2624, if the responsible Administrator is not known). In addition, operators can also use the Hamilton Sundstrand website at www.hamiltonsundstrand. com to contact the Commercial Spares group. Upon entering the website, select

Page 5OCROpen in PDF

"Customer Service" followed by "Commercial spares" for other contact and order processing options that are available.

5. FURTHER ACTION No further action is requested after full accomplishment of this AOT.

6. AOT APPROVAL EASA design. The technical content organisation approval number EASA.21.J.031. of this AOT has been approved under the authority of Airworthiness Directive (AD). It is anticipated that this AOT will be rendered mandatory by an EASA

7. REPORTING / ACKNOWLEDGMENT Operators are requested to acknowledge receipt of this Aot within 48 hours after receipt to:

Phone: +33 (095 65 93 47 91 Fax: +33 (0)5 61 93 32 73 Mailto: richard.lascours@airbus.com This acknowledgement can be made through the Airbus RCSM when available.

Inspection results and questions about the technical content of this AOT are to be addressed to:

Mr. Adrien TONON Hydraulic Systems, Phone: +33 (0) 5 67 19 20 35 Fax: +33 (0)5 61 93 32 73 Mailto: adrien.tonon@airbus.com Best regards, J. GROTHER VICE PRESIDENT A330/A340 PROGRAMME

CUSTOMER SERVICES DIRECTORATE 'If you receive this message via e-mail/internet, we draw your attention to the fact that it may be monitored and/or intercepted.

integrity of this message and its contents, Further, whilst airbus has taken reasonable measures to ensure the or implied is given that the contents hereof conform to the original. Ir no warranty, whether express case of any doubt, please retrieve this document from your sita address or the Airbus AOLS system or request that it be retransmitted by fax or Page 5