On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 3
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0486; AD 2014-15-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'cf9b5bdbf44a50cf4146f902116c77e00d2729ae668de168299a1d42fa5e2020' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'cf9b5bdbf44a50cf4146f902116c77e00d2729ae668de168299a1d42fa5e2020' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
CUSTOMER SERVICES DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N006-14 Page 1 of 3 Date: 13-MAY-2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 53 – Inspection for Missing Fasteners at FR24 RH Side between STR17 & STR18 AIRCRAFT TYPE: A319,A320,A321 OUR REF.: A53N006-14 dated 13-MAY-2014.
1. AIRCRAFT AFFECTED MSN 5230 to 5254; 5256 to 5294; 5296 to 5300
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix A.Fasteners location Appendix B.Flowchart
2.2 REFERENCES Ref. 1. SRM 53-21-12 PB 001 Fig 001 item 60 Ref. 2. Service Bulletin A320-53-1285 rev. 00 dated Jan 29/14 Ref. 3. NTM 51-90-00 Ref. 4. NTM 51-10-08 Ref. 5. SRM 51-75-11
3. REASON
3.1 FACTS During a VIP cabin customisation, several fasteners and one angle (PN D532-30065-201-03 identified in Ref. 1.) were found missing at FR24 Right Hand side between STR17 and STR18. A quality investigation has shown that the following MSN are potentially impacted by the same issue:
MSN 5230 to 5254; 5256 to 5294; 5296 to 5300.
3.2 CONSEQUENCES Non-installation of the angle and fasteners may affect the structural integrity of the circumferential joint and surrounding area: fatigue analysis has set up a threshold (TH) of 3300 FC for possible crack initiation without this angle.
3.3 AIM The aim of this AOT is to call for a one-time Detailed Inspection (DET) in order to detect any missing fastener at FR24 RH side between STR17-STR18. The latest fatigue analysis results are not sufficient to demonstrate TH provided in SB Ref. 2.
Some of potentially affected A/C have already reached the revised TH of 3300 FC and need to be inspected trough this AOT, which aims at the same inspection, before SB Ref. 2. revision.
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N006-14 Page 2 of 3 Date: 13-MAY-2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE Instructions provided in this AOT must be applied within 60 FC from AOT issuance date since potentially affected A/C have already reached the revised TH of 3300 FC.
4.1.2 MANPOWER The manpower estimates given in this AOT are based on the direct labour cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacturing and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.
The estimated time to get access, perform the inspection and close-up is 1 MH.
4.2 DESCRIPTION
4.2.1 ACCESS WARNING: Be careful when you use consumable materials. Obey the material manufacturer's instructions and your local regulations.
Put ACCESS PLATFORM 4M (13 FT) in position at zone 230 at level of fuselage external RH side, FR24.
4.2.2 INSPECTION REQUIREMENTS Please refer to Appendix A. for location of possible missing fasteners and to Appendix B. for inspection flowchart.
Perform a DET as per Ref. 3. for missing fasteners. If necessary use a flashlight flush to fuselage skin in order to detect rivet heads.
If fasteners presence / absence cannot be confirmed by the DET, one of the two further inspection steps has to be applied:
- Perform HFEC inspection of the area as per Ref. 4.
- Or perform local sanding as per Ref. 5. and do a DET as per Ref. 3.
4.2.3 FINDINGS Missing fasteners reported in the area corresponds to a non-installation of the angle. In case of missing fasteners confirmation, embody SB Ref. 2. before next flight.
In case of other findings (such as crack discovered during the inspection), please contact Airbus before next flight to get further instructions:
SEOE1/SEOE2/SEOE3 Customer Services Fax: +33 (0)5 61 93 28 73
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N006-14 Page 3 of 3 Date: 13-MAY-2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Mailto:
region1.StructureRepairSupport@airbus.com region2.StructureRepairSupport@airbus.com region3.StructureRepairSupport@airbus.com Or for AOG request AIRTAC (Airbus Technical AOG Center) Customer Services Phone: +33 (0)5 61 93 34 00 Fax: +33 (0)5 61 93 35 00 Mailto: airtac@airbus.com
4.3 SPARES AND TOOLING Information about spares and tooling for missing angle installation is available in SB Ref. 2. content.
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN A new revision (rev. 01) of SB Ref. 2. will be issued to cancel and supersede this AOT including:
- Inspection requirements depicted in this AOT,
- Updated TH of 3300 FC.
5.2 IMPACTED DOCUMENTATION N/A
6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
7. REPORTING Questions about this AOT and inspection results with or without findings are to be sent to Airbus Customer Services engineering as soon as possible, after the AOT application, to the attention of:
Emeric MEVEL Structure Engineer Structure Engineering Support – SEES1
CUSTOMER SERVICES Phone: +33(0)5 67 19 02 41 Fax: +33(0)5 61 93 36 14 Mailto: emeric.mevel@airbus.com Best Regards, Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES Gilles DE-CEVINS VICE PRESIDENT A320 PROGRAMME