On this page
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 9
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-3635; AD 2016-12-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4ca2c4b5deea84b69df531deb486f25c9cc087d708436320288a0dcd3afab689' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4ca2c4b5deea84b69df531deb486f25c9cc087d708436320288a0dcd3afab689' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
CUSTOMER SERVICES DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N007-14 Page 1 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 53 – One-time inspection requirements for external repairs on 1.2 mm fuselage skin
AIRCRAFT TYPE: A319, A320, A321
OUR REF.: A53N007-14 dated 22/07/2014.
1. AIRCRAFT AFFECTED
A319-100, A320-200, A321-100, A321-200
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
APPENDIX 1: Tables of SRM affected repairs
APPENDIX 2: A319 zoning figures of 1.2mm skin thickness panels
APPENDIX 3: A320 zoning figures of 1.2mm skin thickness panels
APPENDIX 4: A321 zoning figures of 1.2mm skin thickness panels
2.2 REFERENCES
Ref.1: A319/A320/A321 SRM
• 53-00-11 PB201
• 53-11-11 PB201
• 53-21-11 PB201
• 53-41-11 PB201
Ref.2: A319/A320/A321 NTM
• 51-10-15-270-801-A-01
Ref.3: A319/A320/A321 NTM
• 51-90-00-002-A
Ref.4: A319/A320/A321 NTM
• 51-10-08-250-803-A-01
Ref.5: A319/A320/A321 NTM
• 51-10-16-250-801-A-01
Ref.6: A319/A320/A321 AMM
• 53-35-13
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 2 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3. REASON
3.1 FACTS
During A320 family Extended Service Goal full scale fatigue t ests, findings were seen at external skin repairs completed per SRM. It was determined that the inspection thresholds defined in accordance to the current SRM are insufficient to detect such findings.
The findings were limited to 1.2mm fuselage skin (refer to appendix 2, 3 and 4) and cover for all cut-out external repairs.
The internal repairs are not affected.
The cracks are not detectable with General Visual Inspection (GVI) from outside.
3.2 CONSEQUENCES
Non-detection of cracks may affect the structural integrity of the repaired fuselage skin.
3.3 AIM
The aim of this AOT is to call for:
• One time inspection in order to detect any cracks on 1.2 mm fuselage skin on Sections 11, 12, 13, 14, 16 and 17 further to external doubler repairs embodied as:
o SRM (all revisions) o All RDAS issued before 01 January 2005 o Permanent RDAS with inspections (Repair Category “B”) issued After 01 January 2005 Before 01 July 2014 o Concessions o Modifications based on the same principle (e.g. antenna doubler) o Repair approved outside Airbus DOA
• An update of SRM threshold inspection requirements
The inspection thresholds (TH) for possible crack initiation have been calculated by fatigue analysis.
Note: Inspection intervals defined at the time of repair embodiment in the SRM, RDAS or concession remain valid for next repetitive inspections following this one time AOT inspection.
Note: Doubler repairs impacted by this AOT are related to the skin thickness value in fastener areas:
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 3 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Fuselage sections to be inspected are (refer to appendix 2, 3 and 4):
A319
• Sections 11 and 12 (Frame 1 thru 24)
• Sections 13 and 14 (Frame 24 thru 35)
• Sections 16 and 17 (Frame 47/51 thru 64)
A320
• Sections 11 and 12 (Frame 1 thru 24)
• Sections 13 and 14 (Frame 24 thru 35)
• Sections 16 and 17 (Frame 47 thru 64)
A321
• Sections 11 and 12 (Frame 1 thru 24)
• Sections 13 and 14 (Frame 24 thru 35.8)
• Sections 16 and 17 (Frame 47.5 thru 64)
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 4 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. SHORT TERM ACTION
Operators must inspect any external doubler repairs in sections listed on paragraph 3.3 that have been applied through RDAS, concessions and /or as per SRM repairs defined in Appendix 1.
External doubler repairs installed on the aircraft can be identified through available operator documentation or through inspection of the aircraft.
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
Inspection must be accomplished as per timescale detailed in paragraphs 4.1.1.b and 4.1.1.c.
The AOT one time inspection per Ref. 2, can be repetitively postponed if inspections with nil findings are accomplished with a threshold and interval as follows:
Doubler Width DVI per Ref 3 HFEC per Ref 4 ≤160 mm 100 FC 200 FC 160 mm< Width ≤185 mm 50 FC 130 FC
Note: DVI per Ref 3 and HFEC per Ref 4 aim at detecting a crack that grows out of the doubler into the free skin area.
a. Definitions:
• SMALL skin repairs: Maximum cut-out to 2 fasteners pitch.
• LIMITED skin repairs: Maximum cut-out limited to a length of half a frame bay and a width of one stringer bay.
• UNLIMITED skin repairs: Cut-out beyond SMALL and LIMITED skin repairs requirements.
b. SMALL and LIMITED skin repairs:
Note: Doubler thickness measurement is under operators responsibility.
Note: I n case, repair records are not available then AOT inspections requirements must be considered from aircraft first flight.
• For all aircrafts and fuselage sections except A319 and A321 S16/17 above window line Compliance time For Doubler with thickness > 1.4mm, at the latest of the 3 conditions:
• 33400FC from repair embodiment or
• 1500 FC from AOT issuance without exceeding 36400 FC from repair embodiment or
• 350 FC from AOT issuance
For Doubler with thickness = 1.4mm, at the latest of the 3 conditions:
• 45000FC from repair embodiment or
• 1500 FC from AOT issuance without exceeding 49100 FC from repair embodiment or
• 350 FC from AOT issuance Table 3 – SMALL and LIMITED skin repairs (except A319/A321 S16/17 above window line)
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 5 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
• For A319 and A321 Section 16/17 above window line:
Compliance time For Doubler with thickness > 1.4mm, at the latest of the 3 conditions:
• 29500FC from repair embodiment or
• 1500 FC from AOT issuance without exceeding 32000 FC from repair embodiment or
• 350 FC from AOT issuance
For Doubler with thickness = 1.4mm, at the latest of the 3 conditions:
• 39800FC from repair embodiment or
• 1500 FC from AOT issuance without exceeding 43200 FC from repair embodiment or
• 350 FC from AOT issuance
Table 4 – SMALL and LIMITED skin repairs on A319/A321 S16/17 above window line
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 6 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
c. UNLIMITED skin repairs:
Note: Doubler thickness measurement is under operators responsibility.
Note: I n case repair records are not available then AOT inspections requirements must be considered from aircraft first flight.
• For all A/C and fuselage sections except A319 and A321 S16/17 above window line:
Compliance time For Doubler with thickness > 1.4mm, at the latest of the 2 conditions:
• 28700FC from repair embodiment or
• 350 FC from AOT issuance
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions:
• 38700FC from repair embodiment or
• 350 FC from AOT issuance
Table 5 – UNLIMITED skin repairs (except A319/A321 S16/17 above window line)
• For A319 Section 16/17 above window line:
Compliance time For Doubler with thickness > 1.4mm, at the latest of the 2 conditions:
• 26100FC from repair embodiment or
• 350 FC from AOT issuance
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions:
• 35200FC from repair embodiment or
• 350 FC from AOT issuance
Table 6 – UNLIMITED skin repairs on A319 S16/17 above window line
• For A321 Section 16/17 above window line:
Compliance time For Doubler with thickness > 1.4mm, at the latest of the 2 conditions:
• 25200FC from repair embodiment or
• 350 FC from AOT issuance
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions:
• 34000FC from repair embodiment or
• 350 FC from AOT issuance
Table 7 – UNLIMITED skin repairs on A321 S16/17 above window line
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 7 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.1.2 MANPOWER
The manpower to perform this AOT could vary depending the aircraft situation, from repairs records review only through to repair replacement if needed.
4.2 DESCRIPTION
4.2.1 ACCESS
WARNING: Be careful when you use consumable materials. Obey the material manufacturer's instructions and your local regulations.
Access to skin fuselage underneath belly fairing panel 191AT as per AMM Ref 6. Procedure 53- 35-13 May 2014 revision or subsequent ones.
4.2.2 INSPECTION REQUIREMENTS
Inspection is aiming to detect crack on skin underneath the doubler repair on fasteners area (no fastener removal is necessary).
Inspection of the repairs embodied through RDAS, concessions and /or the SRM repairs has to be performed in accordance with May 2014 revision or subsequent ones of the:
• External inspection per NTM (Ref.2) procedure 51-10-15-270-801-A-01 “Inspection for Shallow Cracks in Multi-Layered Joint Structures” or
• Internal inspection per NTM (Ref.5) procedure 51- 10-16-250-801-A-01 “Inspection for Sub- Surface Cracks in Al-Alloy Structure”.
Repetitively inspections aiming at postponing one time inspections have to be performed in accordance with May 2014 revision of the NTM Ref.3 or Ref. 4 or subsequent ones.
Note: Removal of the repair sealant could be necessary when performing referenced NTM procedures.
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 8 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2.3 FINDINGS
a. SMALL and LIMITED skin repairs:
• In case of no findings on skin then inspection intervals and methods remain applicable if any.
Note: Operators have the possibility to re-life the embodied repairs:
o Remove doubler repair per S RM standard practices in order to determine the exact damage size and report details to Airbus.
o Perform new repair according to SRM or RDAS, by increasing the cut -out to next possible size or contact Airbus for specific RDAS.
• In case of findings on skin then operators should before next flight:
o Remove doubler repair per S RM standard practices in order to determine the exact damage size and report details to Airbus.
o Perform new repair according to SRM or RDAS, by increasing the cut -out to next possible size (without waiting Airbus feedback) or contact Airbus for specific RDAS.
or o Contact Airbus for specific RDAS.
b. UNLIMITED skin repairs:
-For repair that has accumulated less than 20 000FC, in case of no findings on skin t hen inspection intervals and methods remain applicable if any.
-In all other cases, contact Airbus repairs daily support for further instructions.
SEOE1/SEOE2/SEOE3 Customer Services Fax: +33 (0)5 61 93 28 73
Mailto:
region1.StructureRepairSupport@airbus.com region2.StructureRepairSupport@airbus.com region3.StructureRepairSupport@airbus.com
AALLEERRTT OOPPEERRAATTOORRSS TTRRAANNSSMMIISSSSIIOONN -- AAOOTT
AOT ref: A53N007-14 Page 9 of 9 Date: 22/07/2014 © AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
Inspection Service Bulletin (ISB) is planned to be issued to cancel and supersede this AOT.
5.2 IMPACTED DOCUMENTATION
SRM (Ref.1) threshold will be updated accordingly with next revisions.
Until availability of SRM (Ref.1) update thresholds provided as per #4.1.1 of this AOT should be considered in case of new embodiment of SRM repairs per #3.
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
7. REPORTING
Questions about this AOT and inspection results with or without findings are to be sent to Airbus Customer Services engineering as soon as possible, after the AOT application, to the attention of:
Julien MAZIEUX Structure repair engineer SRM development – SEOEM
CUSTOMER SERVICES Phone: +33 (0)5 67 19 10 25 Mailto: srm.StructureRepairSupport@airbus.com
Best Regards,
Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES Gilles DE-CEVINS VICE PRESIDENT A320 PROGRAMME