On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 20Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2026-3478, the docket of AD 2026-07-11. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8a56a18773faa41738ea3ef3fd4f5b6e3025f121f99e5a6b2970edb13664cf8c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8a56a18773faa41738ea3ef3fd4f5b6e3025f121f99e5a6b2970edb13664cf8c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Airbus Amber
CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 1 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 53 – Inspection of ATA53 Bracket Catcher supporting ATA27 Flap Shaft installation in MLG Bay at Fr61 AIRCRAFT TYPE: A350-1000 OUR REF.: A53P018-25 Rev 00 dated 24-MAR-2025 EFFECTIVITY DATE: 24-March-2025 Export Control - Not technical
1. AIRCRAFT AFFECTED A350-1000 only.
A/C type Serie MSN A350 A350-1000 00065, 00071, 00088, 00102, 00110, 00118, 00125, 00141, 00161, 00169, 00188, 00206, 00215, 00225, 00229, 00233, 00241, 00252, 00258, 00262, 00266, 00274, 00286, 00290, 00296, 00298, 00306, 00315, 00319, 00326, 00330, 00332, 00336, 00340, 00342, 00346, 00350, 00356, 00362, 00368, 00372, 00374, 00380, 00382, 00386, 00388, 00399, 00402, 00409, 00415, 00420, 00424, 00426, 00430, 00432, 00434, 00438, 00440, 00444, 00446, 00473, 00482, 00490, 00492, 00495, 00503, 00507, 00509, 00533, 00539, 00547, 00560, 00563, 00584, 00600, 00605, 00609, 00610, 00617, 00623, 00628, 00635, 00639, 00647, 00652, 00655, 00662, 00670, 00676, 00683, 00691, 00702, 00710
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix 1: AOT inspection instructions flowchart Appendix 2: AOT repair instruction flowchart Appendix 3: AOT embodiment reporting sheet
2.2 REFERENCES Ref. [1]: Maintenance Illustrated Parts Data (MIPD-IF) A350-A-27-54-62-01000-94AA-A ITEM 080B CA96779-003 - ATA27 - “Shaft” Ref. [2]: Maintenance Illustrated Parts Data (MIPD-IF) A350-A-27-54-62-01000-94AA-A ITEM 030 V2751510220000 - ATA27 - “Catcher” Ref. [3]: Identification (IDENT) A350-A-53-36-86-02000-94CA-A ITEM 125 V5393528020000 - ATA53 - “27-Bracket Equipped” - LH Side Ref. [4]: Identification (IDENT) A350-A-53-36-86-02000-94CA-A ITEM 115 V5393528020100 - ATA53 - “27-Bracket Equipped” - RH Side Ref. [5]: Maintenance procedure (MP) A350-A-27-54-XX-00002-310A-A - Detailed Inspection of the Flap Transmission System Ref. [6]: Non-Destructive Test (NDT) A350-A-51-99-XX-01001-040A-A - Visual Testing
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 2 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Ref. [7]: Maintenance procedure (MP) TASK A350-A-27-54-62-00002-520A-A - “Removal of the Flap Torque-Shaft Assembly” Ref. [8]: Aircraft Structural Repair (ASR) ASR A350-A-51-42-21-01001-667A-A - “Fastener Installation and Removal - Composite and Hybrid Structures” Ref. [9]: Non-Destructive Test (NDT) A350-A-51-96-50-00001-353A-A - Rotating Probe Testing - General
- Procedure A Ref. [10]: Aircraft Structural Repair (ASR) ASR A350-A-51-99-12-00001-311A-A - “Visual - Remaining Corrosion - Metallic Materials” Ref. [11]: Aircraft Structural Repair (ASR) ASR A350-A-51-72-11-00001-660A-A - “Replacement of Structural Components” Ref. [12]: Maintenance procedure (MP) TASK A350-A-27-54-62-00002-720A-A - “Installation of the Flap Torque-Shaft Assembly” Ref. [13]: Aircraft Structural Repair (ASR) ASR A350-A-51-99-10-00001-311A-A “Visual - Detailed – Composites” Ref. [14]: Maintenance procedure (MP) TASK A350-A-27-51-XX-00ZZZ-270Z-A - “Check of the Flap Feedback Position Pick-off Unit (FPPU), the Differential Feedback Position Pick-Off Units (DFPPUs) and the Station Position Pick-off Units (SPPUs)” Ref. [15]: Maintenance procedure (MP SUBTASK) 275462-50000040001 - “Preparation for Test” Ref. [16]: Maintenance procedure (MP) SUBTASK 275462-50000050001 - “Test(s)” Ref. [17]: TFU:53.31.00039 - “A350 - Incorrect Flap fairing installation”
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 3 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3. REASON
3.1 FACTS During inspection of an A350-1000 in Airbus Final Assembly Line, a clash between ATA27 Flap Shaft F02 Ref. [1] and related ATA27 Catcher Ref. [2] was found on both A/C sides.
Catcher Ref. [2] and Flap Shaft Ref. [1] are localized in the MLG Bay at Fr61 (See Figure 1 to 4 for affected parts location).
Figure 1: A/C location Figure 2: View A, MLG Bay area (RH Shown - LH symmetrical) RH shown
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 4 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Figure 3: View B, clash between ATA27 Shaft & ATA27 Catcher (RH shown - LH symmetrical) Figure 4: Identified clash (RH shown – LH symmetrical) ATA53 Bracket ATA27 Catcher ATA27 Shaft FR61 FWD ATA27 Shaft ATA27 Catcher ATA53 Bracket Wear RH shown RH shown
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 5 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.2 HISTORY/BACKGROUND N/A
3.3 ROOT CAUSE The root cause of the clash between both ATA27 items is an incorrect installation of the ATA53 Bracket Ref. [3] and/or Ref. [4] according to the A/C side on which ATA27 Catcher Ref. [2] is installed.
Investigation outcome has demonstrated a 180° inverted installation of this ATA53 Bracket (see Figure 5 for wrong ATA53 Bracket installation and Figure 6 for correct ATA53 Bracket installation).
Figure 5: Reported 180° inverted ATA53 Bracket installation (RH shown - LH symmetrical) ATA53 Bracket ATA27 Shaft FR61 ATA27 Catcher FWD RH shown
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 6 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Figure 6: Expected ATA53 Bracket installation as per definition (RH shown - LH symmetrical) Note: A350-900 is not affected because the ATA53 Bracket presents a different design which does not allow such inverted installation.
3.4 INVESTIGATION The clash between ATA27 Catcher Ref. [2] and Shaft Ref. [1] may lead to a damage of the Shaft.
3.5 CONSEQUENCES In case of single failure of the affected Shaft, the complete Flap transmission would be fixed in a failsafe position. In that case, the Flap Shaft would be kept in place by the ATA53 Bracket and ATA27 Catcher avoiding additional damage.
Nevertheless, an additional ATA27 Shaft rupture along the ATA27 Flap transmission could potentially result in an inboard Flap surface no longer connected and controlled by the Flap command / monitoring.
FR61 Aircraft Junction on Doubler side Rear Canted BeamATA53 Bracket ATA27 Catcher ATA27 Shaft FWD RH shown
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 7 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. OBJECTIVES OF THIS AOT The objective of this AOT is to request a one-time inspection of the installation position of the ATA53 Bracket Ref. [3] and Ref. [4] to confirm their correct installation.
Note:
Performing or having performed the MP task Ref. [5] is an Alternative Means of Compliance (AMOC) to the DET inspection as required in §5.4.
5. MAINTENANCE PROCEDURE NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). If the instructions of this AOT are marked as Required for Compliance (RC), the operator must follow the instructions as indicated. These instructions are introduced by “in accordance with”.
NOTE: The instructions of this AOT include procedures given in other documents or in other sections of the AOT. If the instructions of this AOT are NOT marked as Required for Compliance (RC), the operator can use an alternative procedure accepted by his/her local authority. These instructions are introduced by “refer to”.
NOTE: When this AOT gives the access or close-up instructions with no return to service tests, the operator can adapt these instructions to add flexibility to the maintenance operations. The technical intent of this AOT must comply with the set parameters.
5.1 PLANNING (RC) From the AOT effective date and no later than the end of September 2025 (the 30th of September 2025), perform the actions in accordance with §5.4 to §5.7.
5.2 MANPOWER For the Inspection manpower, including access, it is estimated to take 0.2 hour for the whole A/C.
For the Repair manpower, including access, it is estimated to take 12.5 hours for the whole A/C.
5.3 ACCESS WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
-THE FLIGHT CONTROLS -THE FLIGHT CONTROL SURFACES -THE LANDING GEAR AND RELATED DOORS -THE CARGO DOORS -OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 8 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT CAUTION:
MAKE SURE THAT THE MAINTENANCE DEVICES OF THE WING TIP BRAKES ARE IN THE 'O' POSITION. THIS PREVENTS THE MOVEMENT OF THE FLAP/SLAT TRANSMISSION SYSTEM DURING MAINTENANCE.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE CARBON-FIBER TRANSMISSION SHAFTS OF THE FLAPS. CARBON-FIBER COMPONENTS ARE EASILY DAMAGED.
CAUTION:
DO NOT APPLY WEIGHT TO THE TRANSMISSION SHAFTS OF THE FLAPS OR USE THEM AS HANDLES. THE TRANSMISSION SHAFTS ARE CARBON-FIBER COMPONENTS AND YOU CAN EASILY CAUSE DAMAGE TO THEM.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES. THESE COMPONENTS ARE MADE OF CARBON FIBER REINFORCED PLASTIC.
A/C configuration for inspections and Repairs:
No specific condition is required, A/C can be either on ground or on jacks with MLG doors opened.
The access platform 3M (10 FT) may be required in the frame of repair embodiment.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 9 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.4 INSPECTION (RC) A. Preparation of the Inspection Area
(1) If necessary, use a FLASHLIGHT and get access to the Main Landing Gear Bay at Fr61.
B. Inspection Procedure On both LH and RH sides:
(1) Do a Detailed Inspection (DET), in accordance with Ref. [6] to ensure the correct installation of ATA53 Bracket Ref. [3] & Ref. [4] (see Figure 6).
(2) If both ATA53 Bracket Ref. [3] and Ref. [4] are installed in accordance with assembly drawing installation (see Table 1), send inspection report (APPENDIX 3: AOT embodiment reporting sheet).
No further action.
(3) If ATA53 Bracket Ref. [3] and/or Ref. [4] is/are not installed in accordance with assembly drawing installation (see Table 1), go to §5.5 & §5.6.
Notes:
Performing or having performed the MP task Ref. [5] is an Alternative Means of Compliance (AMOC) to the DET inspection as required in §5.4 B (1).
If nil finding is reported in the frame of MP task Ref. [5], send inspection report (APPENDIX 3: AOT embodiment reporting sheet) and no further action is required.
If finding is reported in the frame of MP task Ref. [5] and this finding is consistent with the one mentioned in §5.5, follow the instructions defined in accordance with §5.6.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 10 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.5 FINDINGS (RC) Correct installation (RH shown - LH symmetrical) Incorrect installation (RH shown - LH symmetrical) It is considered a finding, when the ATA53 Bracket (Ref. [3] and/or Ref. [4]) is/are incorrectly installed i.e. when the ATA53 Bracket flange is installed in the FWD direction.
FWD FWD ATA53 Bracket flange oriented in FWD direction ATA53 Bracket flange oriented in AFT direction
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 11 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.6 INSTRUCTIONS (RC) WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
-THE FLIGHT CONTROLS -THE FLIGHT CONTROL SURFACES -THE LANDING GEAR AND RELATED DOORS -THE CARGO DOORS -OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
CAUTION:
MAKE SURE THAT THE MAINTENANCE DEVICES OF THE WING TIP BRAKES ARE IN THE 'O' POSITION. THIS PREVENTS THE MOVEMENT OF THE FLAP/SLAT TRANSMISSION SYSTEM DURING MAINTENANCE.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE CARBON-FIBER TRANSMISSION SHAFTS OF THE FLAPS. CARBON-FIBER COMPONENTS ARE EASILY DAMAGED.
CAUTION:
DO NOT APPLY WEIGHT TO THE TRANSMISSION SHAFTS OF THE FLAPS OR USE THEM AS HANDLES. THE TRANSMISSION SHAFTS ARE CARBON-FIBER COMPONENTS AND YOU CAN EASILY CAUSE DAMAGE TO THEM.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES. THESE COMPONENTS ARE MADE OF CARBON FIBER REINFORCED PLASTIC.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53P018-25 Rev 00 Page 12 of 20 Date: 24-MAR-2025 C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT If finding (ATA53 Bracket found with its flange in the FWD direction) reported during inspection in §5.4 B, do the below steps.
Per affected aircraft side:
(1) Remove and discard affected ATA27 Catcher Ref. [2] and ATA27 Shaft F02 FIN 5004CV Ref. [1] (LH side) and/or ATA27 Catcher Ref. [2] and ATA27 Shaft F02 FIN 5104CV Ref. [1] (RH side) in accordance with Ref. [7].
(2) Remove and discard fasteners at junction between ATA53 Bracket and aircraft structure in accordance with Ref. [8]. Affected fasteners are represented by the blue circles in the Figure 7.
Figure 7: ATA53 Bracket fastener removal and hole inspection (RH shown - LH symmetrical) WARNING: This picture is taken from an ATA53 BRACKET WELL ORIENTED.
Remark: Figure 7 presents fasteners description to be removed.
Fasteners in dotted circles or squares correspond to fasteners not visible on the Figure 7.
Disassemble ATA53 Bracket Ref. [3] and/or Ref. [4] from aircraft junction.
(3) Do a Detailed Inspection of the ATA53 Bracket Ref. [3] and/or Ref. [4] with reference to Ref. [10] to make sure there is no scratch and no wear mark.