Other document · Airbus

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 01AOT A57N012-19 Rev01 · 9 pages · 433 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0982, the docket of AD 2020-05-16. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2019-0982 (document 0005) · AD 2020-05-16

Revision 01AOT-A57N012-19 R01 · 9 pages · 433 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0009, the docket of AD 2024-06-07. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-0009 (document 0009) · AD 2024-06-07

Manufacturer
Airbus
Type
All Operators Transmission
Number
A57N012-19
Latest revision known
A57N012-19, Revision 01, dated April 18, 2019

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 9

Revision 01, the newest copy. From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0982, the docket of AD 2020-05-16. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '2a774e8a23d6b500413ccd3b7cddb20e80a64760c07e2871bf2e5643107bbfd3'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 1 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 57 – OVERWING PANEL INSTALLATION INSPECTION AIRCRAFT TYPE: A319,A320,A321 OUR REF.: A57N012-19 Rev 01 dated 18-APR-2019 OUR PREVIOUS REF.: A57N012-19 Rev 00 dated 20-MAR-2019

0. REASON FOR REVISION Paragraph “1. AIRCRAFT AFFECTED” updated to add the following MSNs into AOT applicability:

8026, 8028, 8031-8032, 8034, 8040-8041, 8044-8045, 8049, 8054, 8057, 8061-8062, 8065, 8069, 8071, 8075-8076, 8082-8083, 8103.

Paragraph “3.1 FACTS” updated content to remove reference to aircraft delivery date. This information is superseded by the updated paragraph 1. AIRCRAFT AFFECTED.

“BEG REV 01”

1. AIRCRAFT AFFECTED 7181, 7530, 7544, 7548, 7598, 7610, 7634, 7669, 7757, 7811, 7849, 7851, 7853, 7858, 7862, 7871, 7875, 7895, 7918, 7920, 7934, 7936, 7941, 7945, 7952, 7963-7964, 7968, 7977, 7980, 7986-7987, 7992, 7995-7996, 8000, 8008, 8014-8017, 8023, 8026-8029, 8031-8032, 8034, 8036, 8038-8047,8049- 8058, 8060-8063, 8065, 8067-8069, 8071-8090, 8092-8139, 8141-8171, 8173-8221, 8223-8256, 8258- 8270, 8272-8276, 8278-8288, 8290-8378, 8380-8420, 8422-8438, 8440-8444, 8446-8468, 8470-8482, 8484-8494, 8496-8500, 8502-8507, 8509-8530, 8532-8546, 8548-8582, 8584-8586, 8589-8592, 8594- 8595, 8598-8601, 8604-8609, 8611, 8613-8617, 8619-8628, 8630, 8632, 8634, 8636, 8639-8643, 8646, 8648, 8650, 8652, 8654, 8656-8659, 8661-8665, 8667-8673, 8675-8677, 8679-8682, 8684-8690, 8692, 8694-8695, 8700, 8702, 8705, 8717, 8726.

“END REV 01”

2. REFERENCED DOCUMENTATION

2.1 APPENDIX Appendix 1: Inspection Flowchart Appendix 2: Reporting Form

2.2 REFERENCES

01. AMM TASK 32-12-00-010-001-A - Open the Main Gear Doors for Access

02. AMM TASK 57-51-42-400-002-A - Installation of the Overwing Panel

03. Overwing Panel installation drawings D57557048 (effective all A319/A320 models) and D57557049 (effective all A321 models)

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 2 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Overwing Panel installation drawings D57557048 and D57557049 are attached to this AOT.

3. REASON

3.1 FACTS During aircraft inspections before delivery, a discrepancy was detected in Overwing Panel (OWP) installation. At one OWP installation point (out of seven total attaching points), the attaching bolt was not correctly installed (the nut was missing). This triggered production line inspections resulting in three additional findings.

“BEG REV 01” Investigations revealed a discrepancy in production work orders following an OWP installation industrial change. This change concerns only two out of the seven OWP attaching points, identified as point A and point B in Figure 1.

“END REV 01”

3.2 CONSEQUENCES Missing or incorrect bolt installation into point A and/or point B lugs could lead to localized stress increase into the OWP areas surrounding the affected attaching point and into the attaching strap. It has been demonstrated that there is no risk of PDA resulting from this installation discrepancy, however a consequential reduction of OWP structural damage tolerance capability is identified.

3.3 AIM The aim of this AOT is to provide instructions for OWP inspection and to confirm its correct installation.

In case of findings, corrective actions (hardware installation or OWP repair) and additional inspections for consequential damage are required.

4. SHORT TERM ACTION

4.1 PLANNING AND MANPOWER

4.1.1 ACCOMPLISHMENT TIMESCALE The inspections detailed in this document paragraph 4.2 are to be accomplished no later than 6 months after AOT issuance.

The inspections detailed in this AOT will be subject to an Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA).

4.1.2 MANPOWER Estimated time to perform the inspection is 0.1 Hrs per Wing.

In case of finding (missing bolt, nut, washer or cotter pin), corrective actions will require additional 0.5 Hrs per Wing.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 3 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT FIGURE 1 – ATTACHING POINTS A & B FIGURE 2 – ATTACHING POINT A FIGURE 3 – ATTACHING POINT B Washer Nut Pin cotter Bush ATTACHING POINT “B” ATTACHING POINT “A” Section K3-K3 Washer Nut Cotter PinSection G3-G3 Washer Nut Cotter Pin Bolt Bolt

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 4 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.2 DESCRIPTION

4.2.1 ACCESS MLG doors opening as per Ref 01.

4.2.1.1 SAFETY PRECAUTIONS Refer to standard safety procedures when accessing the MLG bay and on upper wing surface.

4.2.2 INSPECTION REQUIREMENTS From inside the MLG bay, look upward and inspect the following OWP fitting lugs:

- Forward outboard lug (Rib 4, most forward lug out of three), identified as point A in Figure 1.

- Rear Spar lug (Rib 1, attaching OWP to Wing Rear Spar), identified as point B in Figure 1.

Confirm that attaching hardware is correctly installed (bolt, nut, washer, cotter pin) as per Ref 02 on both sides LH and RH (refer also to Figures 2 and 3) and send the Reporting Form to AIRBUS.

In case of findings, refer to chapter 4.2.3.

4.2.3 FINDINGS

1) In the case only the cotter pin is missing, but the bolt, washer, and nut are installed:

a) Check that the installation is in accordance with Ref 02 (check torque value) and re-install missing parts before next flight.

b) Send Reporting Form to AIRBUS.

2) In case of a missing bolt or nut, perform a DET inspection to detect any distortion or missing part:

a) On the OWP lower surface in the area of 300 mm radius around concerned fitting (refer to Figure 4);

b) On the OWP upper surface, inspect the attaching strap installed on the leading edge and outboard side of OWP (refer to Figure 5);

c) In case of NIL findings, complete installation in accordance with Ref 02 before the next flight, and go to step “e”.

d) In case of findings, assess the damage and perform a repair in accordance with the SRM or send a damage report to AIRBUS before next flight for further instructions.

e) Send Reporting Form to AIRBUS

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 5 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT FIGURE 4 – INSPECTION AREA – OWP LOWER SURFACE FIGURE 5 – INSPECTION AREA – OWP UPPER SURFACE R 300 mm R 300 mm

STRAP INSPECTION

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 6 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.3 SPARES AND TOOLING Refer to Ref 03 for applicable P/Ns.

For your information, the following parts have been identified as composing the installation assembly:

Part Number Description Total Quantity per a/c Alternative P/N Local manufacturing authorized Attaching point location NAS1149D0516K Washer 2 N/A NO A NSA5060-5 Nut 2 N/A NO A NAS6605D16 Bolt 2 N/A NO A D5754082420200 Washer 2 N/A YES B NSA5060-4 Nut 2 N/A NO B NAS6604D25 Bolt 2 N/A NO B MS24665-153 Pin cotter 4 N/A NO A & B No special tooling is required to complete the inspection or hardware installation.

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN After completion of this AOT it is essential that all the inspections results are reported to AIRBUS using the Reporting Form in Appendix 2. AIRBUS will consider the delivery of the inspection results as AOT terminative action.

5.2 IMPACTED DOCUMENTATION None.

6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.

7. REPORTING Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain, Section Engineering Support and ATA 57-50.

As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to be addressed to Airbus Customer Services through the generic e-mail address:

inspection.results@airbus.com.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 7 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Best Regards, Christian FREMONT

VICE PRESIDENT ENGINEERING SUPPORT

CUSTOMER SERVICES Jean-Pierre GOMEZ VICE PRESIDENT A320 FAMILY PROGRAMME

CUSTOMER SERVICES

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 8 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 1 – INSPECTION FLOWCHART Perform DET inspection of both attaching points A and B shown in Figure 1 to confirm correct installation (bolt, washer, nut, cotter pin)

NO FURTHER

ACTION REQUIRED,

REPORT TO AIRBUS Repair iaw SRM or submit damage assessment to AIRBUS Are both attaching points correctly installed?

YES NO YES Enter into LH/RH MLG bay Is there any damage in the area?

NO NO Is only the pin cotter missing?

Restore installation as per Ref 02 Perform DET to check for signs of damage as per paragraph 4.2.3 YES Restore installation as per Ref 02

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N012-19 Rev 01 Page 9 of 9 Date: 18-APR-2019 © AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 2 – Reporting Form A/C INFORMATION:

OPERATOR:

A/C MSN:

A/C REGISTRATION:

FLIGHT CYCLES:

FLIGHT HOURS:

DATE OF INSPECTION:

For the concerned MSN:

-If the attaching point is correctly installed: quote NIL findings.

-If any attaching element is missing, report finding and corrective action.

INSPECTION

LOCATION INSPECTION RESULT LH OWP Point A LH OWP Point B RH OWP Point A RH OWP Point B