Copy · SB_28-2178_r00 · 58 pages

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0714, the docket of AD 2017-25-09. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '377fb2e2a51188fcded501f78122cc24b8f00d47493779c7ab9cbf5fdc87d055'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

@A310

SERVICE BULLETIN

SUMMARY AIRBUS

CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1 This summary is for information only and is not approved for modification of the aircraft.

ATA SYSTEM: 28 TITLE: FUEL - MAIN FUEL PUMP SYSTEM - INSTALL FUEL PUMP CANISTER

WITH NEW HOOD/MESH FOR OUTER AND TRIM TANK POSITIONS **CONF ALL

MODIFICATIONS

MODIFICATION CLASSIFICATION MAJOR None MINOR 13643H5740 13740H5756 NOTE : As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.

NOTE : Please ignore the above note (if it is present), this note is auto-generated and does not apply to this SB.

NOTE : This modification is related to an airworthiness issue which has been re-classified and confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is handled by AIRBUS under its D esign Organisation Approval No. EASA.21J.031.

REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES Fuel pump canisters are located in pairs in all fuel tanks. There is a fabricated aluminium hood (in two halves) which forms a surface between the fuel pump inlet mesh and the fuel pump canister body.

Some operators have reported cases of cracking on the hood in the inner wing fuel tanks. On one aircraft, part of the hood detached and was found inside the fuel tank.

Fuel pump canister hoods are currently subject to a mandatory inspection in accordance with Inspection Service Bulletin No. A310-28-2173.

Following the investigation into in-service failures, this Service Bulletin introduces new canister hoods for the wing outer tank and the trim tank fuel pumps (where fitted) only. No other fuel pump positions are affected by this Service Bulletin.

The new design consists of a new two part stainless steel hood assembly that is installed over the existing inlet mesh as before. To account for tolerances in the inlet mesh diameter and to avoid installation pre-stress, each hood half has an enlarged central hole, through which a stepped fastener is installed.

DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 1 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

SUMMARY Accomplishment of this Service Bulletin will reduce the scope of the Inspection Service Bulletin No.

A310-28-2173 by canceling the requirement for the repeat inspection of the fuel pump canisters in the outer wing and trim tank (only).

The installation of a new fuel pump canister hood changes the part number of the canister assembly.

The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the affected publications detailed in ’PLANNING INFORMATION’.

GENERAL EVALUATION

EVALUATION TABLE

COMPLIANCE RECOMMENDED (1)

CANCELS INSPECTION SB YES

POTENTIAL AD NO

A/C OPERATION AFFECTED NO

RELIABILITY AFFECTED NO

PAX COMFORT AFFECTED NO

COST SAVING NO

ETOPS AFFECTED NO

STRUCTURAL LIFE EXTN NO

VENDOR SB INVOLVED NO

DE-FUELLING/VENTILATION YES NOTE

(1) : Service Bulletin recommended to be accomplished to prevent significant operational disruptions.

MATERIAL PRICE INFORMATION **CONF 001

MATERIAL PRICE INFORMATION TABLE

MATERIAL SET

QTY PER A/C

PRICE PER

A/C (USD)

MAIN PARTS Equipment BFEB01 4 See SB Hood halves and attachments **CONF 002

MATERIAL PRICE INFORMATION TABLE

MATERIAL SET

QTY PER A/C

PRICE PER

A/C (USD)

MAIN PARTS Equipment BFEB01 6 See SB Hood halves and attachments

EFFECTIVITY **CONF ALL This Service Bulletin is applicable to this (these) operator(s) :

18T 19U 40T 50W 58X 82Z 98W 99Y AFG BBC CFC DGA F2I FDX GAF I2L IRA IRM IYE K1P KAC KZU PCA PIA QAF R1T

RJA ROT RZO SGX SUD TBN THY TSC UBD UZB WHT

CONCURRENT REQUIREMENTS None DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 2 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

SUMMARY

REFERENCES / REPERCUSSIONS TFU None OEB None AOT None SIL None ISI None

LINE MAINTENANCE AFFECTED No

LIFE LIMIT None OTHER None

NATURE OF THE WORK

AIRCRAFT YES

EQUIPMENT YES HARD NO SOFT NO OBRM NO

MANPOWER **CONF 001 Task 282178-831-895-001: Modification

TOTAL MANHOURS

11.00

ELAPSED TIME (HOURS)

4.50 **CONF 002 Task 282178-831-895-001: Modification

TOTAL MANHOURS

15.50

ELAPSED TIME (HOURS)

4.50

APPENDICES **CONF ALL Appendix 01 - Manpower Gantt Chart DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 3 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

SUMMARY **CONF 001 NOTE:

AREA OF MODIFICATION.

A

LH WING SHOWN

RH WING SIMILAR A RIB14 A Z500 Z600

REAR SPAR Z650RH Z550LH B C

TYPICAL TYPICAL

BEFORE AFTER

FUEL PUMP

CANISTER

HOOD HALF B C

FUEL PUMP

CANISTER

HOOD HALF B_SB_282178_7_SAAA_01_02 Figure A-USAAA - Sheet 01 DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 4 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

SUMMARY **CONF 002 NOTE:

AREA OF MODIFICATION.

A

LH WING SHOWN

RH WING SIMILAR A RIB14 B A Z319 B Z500 Z600

REAR SPAR Z650RH Z550LH C D C D

TYPICAL TYPICAL

BEFORE AFTER

FUEL PUMP

CANISTER

HOOD HALF C D

FUEL PUMP

CANISTER

HOOD HALF B_SB_282178_7_SAAB_01_01 Figure A-USAAB - Sheet 01 DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 5 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

SUMMARY This Page Intentionally Left Blank DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 6 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN AIRBUS

CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1 ATA SYSTEM: 28 TITLE: FUEL - MAIN FUEL PUMP SYSTEM - INSTALL FUEL PUMP CANISTER

WITH NEW HOOD/MESH FOR OUTER AND TRIM TANK POSITIONS MODIFICATION No.: 13643H5740 13740H5756 NOTE : Please ignore the above note (if it is present), this note is auto-generated and does not apply to this SB.

NOTE : This modification is related to an airworthiness issue which has been re-classified and confirmed by EASA as minor in acco rdance with EU Part 21.A.91. As such, this is handled by AIRBUS under its Design Organisation Approval No.

EASA.21J.031.

This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with any information contained in it. It is delivered on the express condition that said document and the information contained in it shall be treated as confidential, shall not be used for any purpose other than that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall not be duplicated in any manner (except for the purposes of performing the tasks described hereunder and provided that any recipient of such document shall comply with the conditions herein), without AIRBUS prior written consent.

1. PLANNING INFORMATION **CONF ALL A. EFFECTIVITY

(1) Models 310-203 310-221 310-222 310-304 310-308 310-322 310-324 310-325

(2) Effectivity by MSN 0162 0230 0245 0248 0267 0278 0281 0283 0331 0356 0362 0364 0369 0378 0394 0399 0413 0418-0419 0421-0422 0425 0431 0434 0436-0437 0439 0441 0444-0447 0449 0452 0456-0458 0467 0472-0473 0478 0480 0482-0484 0488-0492 0494-0500 0503 0519-0520 0522-0524 0526 0537 0539 0545 0547 0549-0552 0562 0564-0565 0567-0568 0571 0574 0576 0585-0588 0590-0595 0597 0599-0600 0620 0622 0624 0636 0644 0646-0649 0651 0653 0656 0658 0660-0661 0663 0667 0671-0672 0674 0676 0678 0682 0687 0689 0691 0700 0702 0704 0706 DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 1 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

(3) Effectivity by Operator The Operator/MSN relationship is provided for information only and is correct at the time of issue in accordance with the information available to AIRBUS. Any future changes resulting from transfer of an aircraft from one operator to another will not be reflected in this list unless the Service Bulletin is revised for another reason.

OPERATOR MSN 18T 0473 19U 0399 40T 0413 50W 0498 58X 0431 82Z 0550 0551 98W 0495 99Y 0489 AFG 0496 0497 BBC 0594 0700 CFC 0425 0441 0444 0446 0482 DGA 0418 0421 0422 F2I 0491 0520 FDX 0162 0230 0245 0248 0267 0278 0281 0283 0331 0356 0362 0364 0369 0378 0394 0439 0449 0452 0456 0457 0458 0467 0492 0500 0539 0549 0552 0593 GAF 0434 0484 0503 0522 0523 I2L 0661 IRA 0436 0671 IRM 0488 0499 0524 0526 0537 0547 0564 0567 0586 0595 0620 IYE 0568 0702 0704 K1P 0648 KAC 0647 0649 0663 KZU 0592 0622 0646 PCA 0419 PIA 0585 0587 0590 0653 0656 0660 0676 0678 0682 0687 0689 0691 QAF 0667 R1T 0591 RJA 0445 0490 ROT 0636 0644 RZO 0571 0624 0651 SGX 0519 0562 SUD 0437 TBN 0565 THY 0478 0480 TSC 0447 0472 0483 0545 0588 0597 0599 0600 0658 UBD 0672 0674 UZB 0574 0576 0706 WHT 0494 DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 2 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

(4) Configuration by MSN MSN

CONFIGURATION 0162 0230 0245 0248 0267 0278 0281 0283 0331 0356 0362 0364 0369 0394 0419 001 0378 0399 0413 0418 0421 0422 0425 0431 0434 0436 0437 0439 0441 0444 0445 0446 0447 0449 0452 0456 0457 0458 0467 0472 0473 0478 0480 0482 0483 0484 0488 0489 0490 0491 0492 0494 0495 0496 0497 0498 0499 0500 0503 0519 0520 0522 0523 0524 0526 0537 0539 0545 0547 0549 0550 0551 0552 0562 0564 0565 0567 0568 0571 0574 0576 0585 0586 0587 0588 0590 0591 0592 0593 0594 0595 0597 0599 0600 0620 0622 0624 0636 0644 0646 0647 0648 0649 0651 0653 0656 0658 0660 0661 0663 0667 0671 0672 0674 0676 0678 0682 0687 0689 0691 0700 0702 0704 0706 002

(5) Configuration definition **CONF 001 Config. 001 is valid for A310-200 aircraft given in the effectivity of this Service Bulletin as a standard configuration.

**CONF 002 Config. 002 is valid for A310-300 aircraft given in the effectivity of this Service Bulletin as a standard configuration.

(6) Material Effectivity **CONF 001

MATERIAL

QTY PER A/C

SEE NOTES Equipment BFEB01 4

(1) Reidentified part set REIDB01 1 Consumable CMLB01 1 NOTE

(1) : One Kit BFEB01 is required for the modification of each Fuel Pump Canister.

**CONF 002

MATERIAL

QTY PER A/C

SEE NOTES Equipment BFEB01 6

(1) Reidentified part set REIDB01 1 Consumable CMLB01 1 NOTE

(1) : One Kit BFEB01 is required for the modification of each Fuel Pump Canister.

DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 3 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN **CONF ALL B. CONCURRENT REQUIREMENTS None C. REASON

(1) History Fuel pump canisters are located in pairs in all fuel tanks. There is a fabricated aluminium hood (in two halves) which forms a surface between the fuel pump inlet mesh and the fuel pump canister body.

Some operators have reported cases of cracking on the hood in the inner wing fuel tanks. On one aircraft, part of the hood detached and was found inside the fuel tank.

Fuel pump canister hoods are currently subject to a mandatory inspection in accordance with Inspection Service Bulletin No. A310-28-2173.

(2) Objective/Action Following the investigation into in-service failures, this Service Bulletin introduces new canister hoods for the wing outer tank and the trim tank fuel pumps (where fitted) only.

No other fuel pump positions are affected by this Service Bulletin.

The new design consists of a new two part stainless steel hood assembly that is installed over the existing inlet mesh as before. To account for tolerances in the inlet mesh diameter and to avoid installation pre-stress, each hood half has an enlarged central hole, through which a stepped fastener is installed.

(3) Advantages Accomplishment of this Service Bulletin will reduce the scope of the Inspection Service Bulletin No. A310-28-2173 by canceling the requirement for the repeat inspection of the fuel pump canisters in the outer wing and trim tank (only).

The installation of a new fuel pump canister hood changes the part number of the canister assembly.

(4) Operational/Maintenance Consequences The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the affected publications detailed in ’PLANNING INFORMATION’.

D. DESCRIPTION To accomplish this Service Bulletin it is necessary to :

**CONF 001 Task 282178-831-895-001: Modification

(1) Replace the Hood Halves of the Fuel Pump Canisters in the LH Outer Wing Tank DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 4 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN

(2) Replace the Hood Halves of the Fuel Pump Canisters in the RH Outer Wing Tank

(3) Re-identify the Fuel Pump Canisters in the LH Outer Wing Tank

(4) Re-identify the Fuel Pump Canisters in the RH Outer Wing Tank **CONF 002 Task 282178-831-895-001: Modification

(1) Replace the Hood Halves of the Fuel Pump Canisters in the LH Outer Wing Tank

(2) Replace the Hood Halves of the Fuel Pump Canisters in the RH Outer Wing Tank

(3) Replace the Hood Halves of the Fuel Pump Canisters in the Trim Tank

(4) Re-identify the Fuel Pump Canisters in the LH Outer Wing Tank

(5) Re-identify the Fuel Pump Canisters in the RH Outer Wing Tank

(6) Re-identify the Fuel Pump Canisters in the Trim Tank **CONF ALL E. COMPLIANCE

(1) Classification RECOMMENDED: Service Bulletin recommended to be accomplished to prevent significant operational disruptions.

(2) Accomplishment Timescale Accomplishment of this Service Bulletin is recommended at the earliest opportunity where manpower and facilities are available.

F. APPROVAL The technical content of this document is approved under the authority of Design Organisation Approval No. EASA.21J.031.

If an aircraft listed in the effectivity has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.

G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.

DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 5 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A310

SERVICE BULLETIN **CONF 001 Task 282178-831-895-001: Modification Get Access

1.00 On Aircraft Replace the Hood Halves of the Fuel Pump Canisters in the LH Outer Wing Tank

4.00 Replace the Hood Halves of the Fuel Pump Canisters in the RH Outer Wing Tank

4.00 Re-identify the Fuel Pump Canisters in the LH Outer Wing Tank

0.50 Re-identify the Fuel Pump Canisters in the RH Outer Wing Tank

0.50 Close-Up

1.00

TOTAL MANHOURS

11.00

ELAPSED TIME (HOURS)

4.50 NOTE : For an explanation of the manhours and elapsed time, refer to the Gantt Chart, Fig. A-UAAAA given in Appendix 01 - Manpower Gantt Chart .

**CONF 002 Task 282178-831-895-001: Modification Get Access

1.00 On Aircraft Replace the Hood Halves of the Fuel Pump Canisters in the LH Outer Wing Tank

4.00 Replace the Hood Halves of the Fuel Pump Canisters in the RH Outer Wing Tank

4.00 Replace the Hood Halves of the Fuel Pump Canisters in the Trim Tank

4.00 Re-identify the Fuel Pump Canisters in the LH Outer Wing Tank

0.50 Re-identify the Fuel Pump Canisters in the RH Outer Wing Tank

0.50 Re-identify the Fuel Pump Canisters in the Trim Tank

0.50 Close-Up

1.00

TOTAL MANHOURS

15.50

ELAPSED TIME (HOURS)

4.50 NOTE : For an explanation of the manhours and elapsed time, refer to the Gantt Chart, Fig. A-UAAAB given in Appendix 01 - Manpower Gantt Chart .

DATE: Jan 09/17 SERVICE BULLETIN No.: A310-28-2178 REVISION No.: 00 - Jan 09/17 Page: 6 7 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

Pages 13–24 of 58