Service bulletin · Aviation Partners Boeing

Revision 2AP737-57-022_Rev02 · 165 pages · 7.0 MB

© Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2026-0010, the docket of a proposed AD (Federal Register 2026-00409). Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2026-0010 (document 0002) · proposed AD FAA-2026-0010

Type
Alert Service Bulletin
Number
AP737-57-022
Latest revision known
AP737-57-022, Revision 2, dated August 27, 2025

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Also cited in 1 proposed AD.

Text · 165Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2026-0010, the docket of a proposed AD (Federal Register 2026-00409). Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '77ca46374f67f6b0eb8198747bee3bf6f99fc673ff2fbbfb859996bfa403cd97'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

AVIATION PARTNERS BOEING SERVICE BULLETIN 555 Andover Park W., Suite 200 Tukwila, WA 98188

(206) 830-7699

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page i Aviation Partners Boeing Proprietary ALERT NUMBER: AP737-57-022 Revision Transmittal Sheet Original Issue: April 17, 2025 Revision 2: August 27, 2025 ATA SYSTEM: 5720 SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection and Repair

This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

For airplanes repaired in accordance with the original issue or Revision 1 of this service bulletin, contact Aviation Partners Boeing (APB) for determination of any additional required regulatory approvals.

Inspections performed in accordance with previous revisions of this service bulletin are not required to be repeated until the next repeat interval as given in this revision.

REASON FOR REVISION Revision 2 is sent to revise the fastener hardware used in the repair actions found in FIGURE 7 and FIGURE 8 to comply with 28-AWL-12 Lightning, Fault Current or Hot Short Protection – Fuel Tank Penetration requirements, correct typographical/illustration errors, and add additional clarification for repair actions.

These sections were changed:

1.F. Approval x Added ‘PSE 57-20-04-1’.

1.G. Manpower x For Table 3 and Table 4, revised manpower estimates for accuracy.

1.H. Weight and Balance Changes x Revised values for ‘Change in Weight’ and ‘Change in Moment’.

1.J. References x For 1.J.3, added Boeing drawing number ‘112A2001, FASTENER INSTL – FRONT SPAR/WING SKIN INTERFACE’ to table.

2.C. Parts Necessary for Each Airplane x For 2.C.2, revised fastener hardware part numbers and descriptions to meet requirements per 28-AWL- 12, added alternate hardware options with procurement/usage notes, corrected fastener grip lengths, added note for required repair filler thickness, and added additional sealant options.

3.A. General Information x Revised note 13 to specify washers are not allowe d to be used with self-sealing nuts, revised SRM references to call out chapter and section, and removed alternate fastener language.

AVIATION PARTNERS BOEING SERVICE BULLETIN

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page ii Aviation Partners Boeing Proprietary

3.B. Work Instructions x For Table 2 and Table 4, revised ‘Method of Compliance’ for CONDITION 4.3 and CONDITION 8.3 from ‘FIGURE 5’ to ‘FIGURE 6’.

x Tables 1–4 and CONDITIONS 2.2.2, 4.2.2, 6.2.2, and 8.2.2 (ACTION 3) were updated to include S-8, aligning with inspection instructions in the 1.E Compliance tables.

FIGURE 7 x Revised fastener diameter code call outs fo r fastener codes ‘A’ and ‘D’ on Sheet 3 of 11.

x Corrected fastener grip leng ths for fastener code ‘D’ along S-8L on Sheet 3 of 11.

x Revised fastener code ‘A’, ‘D’, and ‘E’ call outs fo r field fasteners between S-9L and S-8L for clarity on Sheet 3 of 11.

x Revised sealant call outs on Deta ils E and F to use BMS5-142 and assigned BMS5-95 as an alternate.

x Added fastener centerlines on Details E and F for reference.

x Revised language for step numbers on Sheet 6 of 11 stating they are required to complete the actions shown in the figure.

x Revised Step 23 sealant ‘Identification’ from ‘BMS5-45’ to ‘BMS5-142’.

x Revised note (k) to add statement ‘Filler thickness shall match skin thickness common to stringer 9L’.

x Revised note (p) to add clarification to oversize fastener hole only if required.

x Revised note (p) to add an open hole High Freque ncy Eddy Current (HFEC) inspection of all existing fastener holes common to the repair after required fastener holes have been oversized.

x Revised note (v) to add BMS5-45 sealant specificat ion, and change the cap seal procedure reference from ’51-20-05’ to ’51-80-01, Figure 1’.

x Revised note (w) to remove the language requiring a 6:1 ratio for aerosealing of the repair for clarity.

x Revised note (w) to change sealant call out from ‘BMS5-45’ to ‘BMS5-142’.

x Revised fastener code table part numbers, descript ions, and hole sizes to meet 28-AWL-12 requirements.

x Revised note (a) on fastener code table to correct sealant part number from ‘BMS5-95’ to ‘BMS5-45’, revised fastener cap seal reference from ‘SRM 51-20-05’ to ‘SRM 51-80-01, Figure 1’.

x Revised note (c) on fastener code table, installa tion specification from ‘BAC5004-2’ to ‘BAC5047’.

x Added alternate part numbers, notes (d) and (e) to fastener code table for specific airplane line numbers.

FIGURE 8 x Corrected typographical errors for all instances of ‘F igure 7’ and revised to ‘Figure 8’, where applicable.

x Revised fastener diameter code call outs for fastener codes ‘A’ and ‘D’ on Sheet 3 of 11.

x Corrected fastener grip leng ths for fastener code ‘D’ along S-8L on Sheet 3 of 11.

x Revised fastener code ‘A’, ‘D’, and ‘E’ call outs fo r field fasteners between S-9L and S-8L for clarity on Sheet 3 of 11.

x Revised sealant call outs on Deta ils E and F to use BMS5-142 and assigned BMS5-95 as an alternate.

x Added fastener centerlines on Details E and F for reference.

x Revised language for step numbers on Sheet 6 of 11 stating they are required to complete the actions shown in the figure.

x Revised Step 23 sealant ‘Identification’ from ‘BMS5-45’ to ‘BMS5-142’.

x Revised note (a) to state ‘right’ instead of ‘left’.

x Revised note (k) to add statement ‘Filler thickness shall match skin thickness common to stringer 9L’.

x Revised note (p) to add clarification to oversize fastener hole only if required.

AVIATION PARTNERS BOEING SERVICE BULLETIN

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page iii Aviation Partners Boeing Proprietary FIGURE 8 (Cont.)

x Revised note (p) to add an open hole High Freque ncy Eddy Current (HFEC) inspection of all existing fastener holes common to the repair after required fastener holes have been oversized.

x Revised note (v) to add BMS5-45 sealant specificat ion, and change the cap seal procedure reference from ’51-20-05’ to ’51-80-01, Figure 1’.

x Revised note (w) to remove the language requiring a 6:1 ratio for aerosealing of the repair for clarity.

x Revised note (w) to change sealant call out from ‘BMS5-45’ to ‘BMS5-142’.

x Revised fastener code table part numbers, descript ions, and hole sizes to meet 28-AWL-12 requirements.

x Revised note (a) on fastener code table to correct sealant part number from ‘BMS5-95’ to ‘BMS5-45’, revised fastener cap seal reference from ‘SRM 51-20-05’ to ‘SRM 51-80-01, Figure 1’.

x Revised note (c) on fastener code table, installa tion specification from ‘BAC5004-2’ to ‘BAC5047’.

x Added alternate part numbers, notes (d) and (e) to fastener code table for specific airplane line numbers.

REVISION HISTORY Original Issue: April 17, 2025 Revision 1: June 13, 2025 Revision 2: August 27, 2025

AVIATION PARTNERS BOEING SERVICE BULLETIN 555 Andover Park W., Suite 200 Tukwila, WA 98188

(206) 830-7699

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 1 of 162 Aviation Partners Boeing Proprietary ALERT NUMBER: AP737-57-022 Original Issue: April 17, 2025 Revision 2: August 27, 2025 ATA SYSTEM: 5720 SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection and Repair

PROPRIETARY NOTICE The data contained hereon and herein is proprietary to Aviat ion Partners Boeing. Neither this data nor the data contained herein shall be reprod uced, used or disclosed to others without the written authorization of Aviation Partners Boeing.

EXPORT CONTROLLED TECHNOLOGY This document contains information about a technology controlled by the Export Administration Regulations (EAR) (15 CFR 730-774). It has been classified under Export Control Classification Number (ECCN) 9E991 and may not be exported to certain countries without a license. Providing this information to a foreign national – inside or outside the United States – can constitute a prohibited export. Each person handling this document has a legal responsibility to comply with all applicable EAR requirements and should consult with an Export Control Officer before providing it to any foreign national.

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 2 of 162 Aviation Partners Boeing Proprietary

APB DOCUMENT FEEDBACK FORM To provide feedback on this document to APB for corrections or improvements, please complete the form below and email to the attention of APB Product Support Engineering at:

Email: leng@aviationpartners.com Airline Name: ______________________________________________ Contact Name: ______________________________________________ Phone Number: ______________________________________________ Email Address: ______________________________________________ Airplane Model-Type: ______________________________________________ Document Number: ______________________________________________ Document Revision: ______________________________________________ Document Title: ______________________________________________ Chapter-Section- Subject: ______________________________________________ Page: ______________________________________________ Page Date: ______________________________________________ Description of Change:

(Include additional sheets as required)

Attachments: ______________________________________________

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 3 of 162 Aviation Partners Boeing Proprietary

TABLE OF CONTENTS

APB DOCUMENT FEEDBACK FORM2

SUMMARY5

1. PLANNING INFORMATION9

A. Effectivity9

1. Airplanes9

2. Spares Affected9

B. Concurrent Requirements10

C. Reason10

D. Description10

E. Compliance12

F. Approval33

G. Manpower33

H. Weight and Balance Changes36

I. Electrical Load Data36

J. References36

1. Existing Data:36

2. Data Supplied with this Service Bulletin:36

3. Installation Drawings Used in the Preparation of this Service Bulletin:36

K. Publications Affected37

1. Publications37

2. Damage Tolerance Based Structural Inspections:37

L. Interchangeability and Intermixability of Parts37

M. Software Accomplishment Summary37

2. MATERIAL INFORMATION38

A. Material – Price and Availability38

B. Industry Support Information38

C. Parts Necessary for Each Airplane38

1. Kits/Parts38

2. Parts and Materials Supplied by the Operator:38

3. Parts Modified and Re-identified40

4. Parts Removed and Not Replaced40

D. Parts Necessary to Change Spares40

E. Special Tooling – Price Availability40

F. Special Tooling Necessary to do this Service Bulletin40

3. ACCOMPLISHMENT INSTRUCTIONS41

A. GENERAL INFORMATION41

B. WORK INSTRUCTIONS43

FIGURE 1: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGERS S-9 AND S-10 - EXTERNAL

GENERAL VISUAL INSPECTION64

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 4 of 162 Aviation Partners Boeing Proprietary FIGURE 2: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGERS S-9 AND S-10 - EXTERNAL

GENERAL VISUAL INSPECTION66

FIGURE 3: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-9 – SURFACE HFEC

INSPECTION68

FIGURE 4: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-10 – SURFACE HFEC

INSPECTION70

FIGURE 5: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-9 – SURFACE HFEC

INSPECTION72

FIGURE 6: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-10 – SURFACE HFEC

INSPECTION74

FIGURE 7: LEFT WING – OUTBD LWR WING SKIN AT STRINGER S-9 – CRACK REMOVAL AND REPAIR

.76

FIGURE 8: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 – CRACK REMOVAL AND REPAIR

.87

FIGURE 9: LEFT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – EXTERNAL INSPECTION

.98

FIGURE 10: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – EXTERNAL

INSPECTION102

FIGURE 11: LEFT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – INTERNAL INSPECTION

.106

FIGURE 12: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – INTERNAL

INSPECTION112

APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: INSPECTION OF THE

OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10118

APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 2: INSPECTION OF THE

OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10123

APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 3: INSPECTION OF THE

OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10128

APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 4: INSPECTION OF THE

OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10133

APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 5: INSPECTION OF THE

OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10138

APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 6: INSPECTION OF THE

OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10142

APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 7: INSPECTION OF THE

OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10146

APPENDIX H: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 8: INSPECTION OF THE

OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10150

APPENDIX I: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 9: INSPECTION OF THE

OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10154

APPENDIX J: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 10: INSPECTION OF THE

OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10158

APPENDIX K: PART FITUP FORCES162

AVIATION PARTNERS BOEING SERVICE BULLETIN 555 Andover Park W., Suite 200 Tukwila, WA 98188

(206) 830-7699

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 5 of 162 Aviation Partners Boeing Proprietary

SUMMARY ALERT NUMBER: AP737-57-022 Summary Original Issue: April 17, 2025 Revision 2: August 27, 2025 ATA SYSTEM: 5720 SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection and Repair

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of this service bulletin will make sure any crack in the outboard lower wing skin, left and right wing, common to the two most outboard fasteners at stringers S-9 and S-10, is found and repaired before the crack reaches a critical length. If this service bulletin is not done, any crack that is not detected and corrected could cause the inability of the Principle Structural Element to sustain limit loads and subsequent loss of structural integrity.

737-800 operators reported crack findings at the identical fastener location on seven airplanes during routine maintenance inspections. The cracks were all located in the outboard lower wing skin at the outboard end of stringer S-9, common to the most outboard fastener. The cracks were found to extend in the forward and aft direction and ranged from 2 inches to 5 inches in length. The reported airplanes had accumulated between 20,602 to 30,150 flight cycles, and 41,777 to 77,993 flight hours, at the time of finding. Further analysis determined that stringer S-10 has an equivalent stress level to stringer S-9 and could also have early cracking.

This service bulletin gives instructions to do an external surface High Frequency Eddy Current (HFEC) inspection of the outboard lower wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack. A repair is available in this service bulletin for cracks found at the two most outboard fasteners at S-9 if they do not exceed specified size limits.

Boeing Service Related Problem (SRP) 737-NG-SRP-57-0399 is related to this service bulletin.

Boeing Fleet Team Digest (FTD) 737NG-FTD-57-22002 is related to this service bulletin.

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 6 of 162 Aviation Partners Boeing Proprietary This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

Planning Data Affected Reference Spares Affected No Paragraph 1.A.2., Spares Affected AD Related Yes Refer to Service Bulletin AP737-57-022.

Alternative Method of Compliance (AMOC) Yes Paragraph 1.F Approval Weight and Balance Change Yes Paragraph 1.H., Weight and Balance Changes Electrical Load Changed No Paragraph 1.I., Electrical Load Data Publications Affected No Paragraph 1.K., Publications Affected Airplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) No Paragraph 1.K., Publications Affected Kits/Parts Required No Paragraph 2.C.1., Kits/Parts Operator Supplied Parts/Material Yes Paragraph 2.C.2., Parts and Materials Supplied by the Operator Special Tooling Required No Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin ACTION For Group 1 and Group 2 aircraft:

Do an external general visual inspection of the outboard lower wing skin at the two most outboard fasteners at S- 9 and S-10, left and right wing, for any repair.

1. If any repair is found:

a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), and do the alternative inspection(s) and applicable on-condition corrective action(s) AND

b. Do an external surface High Frequency Eddy Current (HFEC) inspection of the outboard lower wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at the unrepaired areas.

(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

(2) If any crack is found, contact Aviation Partners Boeing for repair instructions and do the repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

2. If no repair is found, do an external surface HFEC in spection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

a. If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

b. If any crack is found at S-9:

(1) Do the repair available in this service bulletin if the crack damage can be removed entirely in accordance with FIGURE 7 or FIGURE 8 and repeat inspection in accordance with FIGURE 9 or FIGURE 10, respectively.

(2) If crack damage cannot be re moved by the standard repair available in this service bulletin, contact Aviation Partners Boeing for repair instructions and do the repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringer S-9, left and right wing, for any crack.

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 7 of 162 Aviation Partners Boeing Proprietary

c. If any crack is found at S-10 contact Aviation Partne rs Boeing for repair instructions and do the repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringer S-10, left and right wing, for any crack.

For Group 3, Group 4, and Group 5 aircraft:

Do an external general visual inspection of the outboard lower wing skin at the two most outboard fasteners at S- 9 and S-10, left and right wing, for any repair.

1. If any repair is found:

a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), and do the alternative inspection(s) and applicable on-condition corrective action(s) AND

b. Do an external surface High Frequency Eddy Current (HFEC) inspection of the outboard lower wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at the unrepaired areas.

(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

(2) If any crack is found, contact Aviation Partners Boeing for repair instructions and do the repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

2. If no repair is found, do an external surface HFEC in spection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

a. If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

b. If any crack is found, contact Aviation Partners Bo eing for repair instructions and do the repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

EFFECTIVITY 737-700/-800/-900/-900ER Airplanes provisioned for the installation of Split Scimitar Winglets with Blended Winglets or Split Scimitar Winglets installed in accordance with STC ST00830SE AND 737-700/700C/-800/-900/-900ER airplanes provisioned for the installation of Blended Winglets with Blended Winglets or wing tips installed in accordance with STC ST00830SE.

Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthines s Directive related to this service bulletin. The Airworthiness Directive will make the com pliance tasks and times given in the service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Aviation Partners Boeing warranty remedies are not available for the inspections, configuration changes, and/or repair procedures given in this service bulletin.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Operator Supplied Parts/Materials. Refer to Paragraph 2.A., Material – Price and Availability.

Page 11OCROpen in PDF

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022

DO AN EXTERNAL SURFACE HIGH FREQUENCY EDDY FASTENERBON S-1O FOR ANY CRACK BOARD WING WSTA 564.5 WSTA WSTA

432.5 WSTA 591.5

458.5 WSTA

458.5 WSTA WSTA 432.5

591.5 WSTA

564.5

DO AN EXTERNAL SURFACE HIGH FREQUENCY EDDY

CURRENT (HFEC) INSPECTION OF THE LOWER WING

SKIN COMMON TO THE TWO MOST OUTBOARD FASTENERS ON S-9 FOR ANY CRACK Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 8 of 162 Aviation Partners Boeing Proprietary

AVIATION PARTNERS BOEING SERVICE BULLETIN 555 Andover Park W., Suite 200 Tukwila, WA 98188

(206) 830-7699

Original Issue: Apr 17, 2025 AP737-57-022 Revision 2: Aug 27, 2025 Page 9 of 162 Aviation Partners Boeing Proprietary ALERT NUMBER: AP737-57-022 Original Issue: April 17, 2025 Revision 2: August 27, 2025 ATA SYSTEM: 5720 SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection and Repair

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A, EFFECTIVITY. IF AN AIRPLANE HAS BEEN LE ASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is applicable to 737-700/-700C/-800/-900/-900ER airplanes provisioned for Split Scimitar Winglets and airplanes provisioned for Blended Winglets modified in accordance with STC ST00830SE per the table below.

GROUP CONFIGURATION DESCRIPTION 1 - 737-700/-800 Airplanes, Line Numbers 1-777 provisioned for the installation of Split Scimitar Winglets with Blended Winglets or Split Scimitar Winglets installed in accordance with STC ST00830SE.

2 - 737-700/-800 Airplanes, Line Numbers 778-99999 provisioned for the installation of Split Scimitar Winglets with Blended Winglets or Split Scimitar Winglets installed in accordance with STC ST00830SE.

3 - 737-900/-900ER Airplanes, Line Numbers 778-99999 provisioned for the installation of Split Scimitar Winglets with Blended Winglets or Split Scimitar Winglets installed in accordance with STC ST00830SE.

4 - 737-700 Airplanes with Variable Numbers YG001-YG039, YG061- YG075 provisioned for the installation of Blended Winglets with Blended Winglets or wing tips installed in accordance with STC ST00830SE.

5 - 737-700/-700C/-800 Airplanes with Variable Numbers YD401-YD403, YG040-YG044, YG076-YG103, YG111-YG123, YG701 provisioned for the installation of Blended Winglets with Blended Winglets or wing tips installed in accordance with STC ST00830SE.

2. Spares Affected None.