Copy · SB 18_18 - Life Vest Pouches Vertical Installation rev. 2 · 17 pages

© Aviointeriors. Filed by the FAA in regulations.gov docket FAA-2019-0557; AD 2019-21-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '98b9ecc2e6cd7eb0abedc07d7a8158878e5f0dd69e4eaa065c21f172c6dd20e9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 1 of 17

OPTIONAL SERVICE BULLETIN N° 18/18

APPROVAL TABLE The technical contents of this service bulletin are approved under the authority of AP -DOA ref.

EASA Ap-003, before official distribution to the customer, this Service Bulletin is submitted to the Agency for agreement as per occurrence no. AR.EU-EASA-2018-000636-2018-06-29

REV

DATE Prepared by G. ARENA Checked by G. ARENA Approved by R. IANNUZZI NEW 30/07/18 REASON Service Bulletin General Review 1 16/10/18 REASON Rectification of step 11 text, “T” Part Number to the annex replaced by “Z” for consistency. Step 4.11 and 4.12 merged. Some typo rectification.

2 11/03/19

GENERAL NOTE: THIS SERVICE BULLETIN IS AN ALTERNATIVE MEANS OF COMPLIANCE TO THE MANDATORY SERVICE BULLETIN 16/18

SUBJECT: LIFE VEST POUCHES P/N 3 13907100004 VERTICAL INSTALLATION

PROCEDURE AFFECTED SEAT MODEL:

Centaurus Economy Class Seat 13E, ETSO Authorisation Approval Number EASA.21O.676 Centaurus Economy Class Seat 13H, ETSO Authorisation Approval Number EASA.21O.722 Centaurus Economy Class Seat 13K, ETSO Authorisation Approval Number EASA.21O.686

AFFECTED SEAT P/N: This service bulletin is applicable to all the serial numbers of the seats listed in the tables below Root 13E 13EA5Z5204JV 13EA5Z5203JV 13EA5Z5304JV 13EA5Z5303JV 13EA6Z5404JV 13EA6Z5403JV 13EA7Z5204JV 13EA7Z5203JV 13EA8Z5404JV 13EA8Z5403JV 13EA4Z5506JV 13EA9Z5610JV 13EC4Z5509JV 13EC3Z5506JV 13EA9Z5506JV 13EG5Z1204RV 13EG5Z1203RV 13EG5Z5204RV 13EG5Z5203RV 13EG5Z5304RV 13EG5Z5303RV 13EG7Z5204RV 13EG7Z5203RV 13EG4Z5506RV 13EG9Z5610RV 13EF4Z5509RV 13EF3Z5506RV 13EG7Z1203RV 13EG7Z1204RV 13EG6Z5703RV 13EG6Z5704RV 13EG2Z5203RV 13EG2Z5204RV 13EG9Z5506RV 13EG8Z5704RV 13EG8Z5703RV 13EG5Z5207RV 13EG5Z5208RV 13EG6Z5404RV 13EG6Z5403RV 13EG8Z5404RV 13EG8Z5403RV Root 13H 13HR1Z5222JV 13HR1Z5221JV 13HR2Z5123JV 13HR5Z1204RV 13HR5Z1203RV 13HR5Z5222RV 13HR5Z5221RV 13HR4Z5123RV 13HR6Z5203RV 13HR6Z5204RV Root 13K 13KA5Z5208JV 13KA5Z5207JV 13KG5Z5208RV 13KG5Z5207RV

COMPLIANCE: At operator discretion

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 2 of 17

REASON: Wrong installation of the life vest pouches leading to not stow properly the life vest.

This condition, if not detected and corrected, could prevent the life vest to perform their intended function, possibly resulting into an unsafe condition in case of an emergency landing or ditching.

PURPOSE: This SB provide details on the procedure for an alternative (vertical) installation of the life vest pouch p/n 313907100004 manufactured by Aviointeriors SpA. This Service Bulletin lead to a Seat Part Numbe r Change, it is an Installer Responsibility to assure the compliance demonstration at aircraft level.

MANPOWER: One person – 10 minutes per pax – 30 minutes per seat (triple standard seat is taken as reference) MATERIALS: Plastic tie as required, n°4 per life vest pouch TOOLS: No special tools are needed WEIGHT VARIATION: No weight variation, nor CG affected

REFERENCES: NT-2-1244 Occurrence Investigation - Life Vest Installation Iss 1 PUBBLICATION AFFECTED: This Service Bulletin also include a new version of the Seat Component Maintenance Manual. The new issue includes the procedures detailed in this Service Bulletin to accomplish the life vest pouch vertical installation.

CMM no. 25-28-88 Rev. 1 (replace the CMM no. 25-26-59) CMM no. 25-28-89 Rev. 1 (replace the CMM no. 25-26-82) New CMMs are available upon request to:

Aviointeriors S.p.A. Customer Support Phone: 0039-0773-6891 Fax: 0039-0773-631546 mail: customer-support@aviointeriors.it web: http://www.aviointeriors.it

Page 3OCROpen in PDF

AVIO AVIOINTERIORS SPA INTERIORS Via Appia Km 66,400 - 04013 Tor Tre Ponti - LATINA - ITALY

1. PROCEDURE The application of this service bulletin is divided in the following phases:

Life vest pouches Inspection

• Performed in order to evaluate if it is necessary to replace the p/n 313907100004 with a new one

- Life vest pouches dismounting

- Life vest reinstallation in vertical position

- Record of the SB implementation and seat part number change

PERFOM THE INSPECTION

IN ACCORDANCE WITH §2 of this SB Is the 313907100004 damaged or -YES wear?

NO Is the Order a new life vest Velcro grip -NO pouch p/n acceptable? 313907100004 THEN YES

PROCEED WITH SEQUENCE OF ACTION PROVIDED From §3 to 1 §7 of this SB Rev. 2 dated 11/03/2019 Page 3 of 17

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 4 of 17

2. LIFE VEST POUCHES INSPECTION Note: It is not required to remove the seat pan to ins pect the life vest pouches. In order to better explain the life vest pouch inspection procedure, the seat pan was removed (this allow to take better pictures of the step by step procedure).

Inspect the life vest pouch assembly in order to define if the p/n 313907100004 is acceptable or not , i nspect the p/n 313907100004 for:

 Excessive wear  Absence of damages  Velcro grip acceptable NOTE: Damaged or wear pouches p/n 313907100004 must be replaced with new one NOTE: If the velcro grip is found not acceptable the life vest pouch p/n 313907100004 must be replaced with a new one.

The velcro grip is acceptable if, when the pouch is closed with the life vest installed, there are no evidences of “sag” or “embark” between its male/female sides.

The general condition of the p/n 313907100004 must be in accordance the figure 2, “Acceptable”

Figure 1 – Not acceptable condition of P/N 313907100004, excessive wear and fabric contamination are shown

Figure 2 - Acceptable 313907100004 wear, damage and velcro grip condition

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 5 of 17

3. DISMOUNTING OF THE LIFE VEST POUCH FROM THE SEAT ASSEMBLY Note: It is not required to remove the seat pan to dismount the life vest pouches. In order to better explain the life vest pouch dismounting procedure, the seat pan was removed (this allow to take better pictures of the step by step procedure).

Dismounting of the pouch 313907100004 from the seat assembly should be accomplished following this procedural step:

 Open the life vest pouch and remove the life vest  With a cutter or a tong cut the 4 plastic tie (2 on the front seat beam, and 2 on the rear seat beam) ref. fig. 3 WARNING Cutter or Tong could damage the front/rear beam, perform the cutting operation with extreme care.

 Repeat these steps for each pouches installed on the seat

Figure 3

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 6 of 17

4. LIFE VEST POUCH VERTICAL INSTALLATION INSTRUCTION Note: It is not required to remove the seat pan to install the life vest pouches. In order to better explain the life vest pouch installation procedure, the seat pan was removed (this allow to take better pictures of the step by step procedure).

Step 1.

Place two plastic ties ( 1) on the front side of the life vest pouch p/n 313907100004 (2)

Step 2.

Place the life vest pocket (2) on the front beam then close the plastic tie (1);

1 1

2 2 1

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 7 of 17

Step 3.

With a plier thigh both the plastic tie to the front beam

Step 4.

With a tong cut the exceeding part of both the plastic tie, repeat the operation for both the plastic tie

Step 5.

With a cutter, remove the sharp edges of the cut plastic tie. The plastic tie final assembly must be as shown in the figure “acceptable”, then repeat the operation for both the plastic tie.

ACCEPTABLE

NOT ACCEPTABLE Front Beam Front Beam

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 8 of 17

Step 6.

Check the rear plastic tie installation:

- Proper tighten

- Proper Cutting

- No sharp edges

- Surface of the pouch adherent to the front beam, absence of “sag” or “embarks”

Step 7.

Install the plastic tie to the lower LH/RH side of the life vest pouches p/n 313907100004, fixing it to the baggage bar

ACCEPTABLE

FLIGHT DIRECTION

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 9 of 17

Step 9.

With a plier tighten both the plastic tie to the baggage bar, make sure that the surface of the life vest pouches adhere to the baggage bar surface.

NOTE: any sag/embark of the upper surface of the pouches is NOT ACCEPTABLE

Step 10.

With a tong cut the exceeding part of both the plastic tie, then with a cutter remove the sharp edge, refer to step 5 for the acceptable versus non acceptable plastic tie installation

Step 11.

Check for the proper installation of the pouches:

- The top rear surface must adhere to the front beam;

- The lower side must adhere to the baggage bar;

- The plastic tie must be free from hazardous projection or sharp edge

- Absence of any sag/embark of the pouch

FLIGHT DIRECTION

FLIGHT DIRECTION

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 10 of 17

5. LIFE VEST INSTALLATION INSTRUCTION

Step 1.

Place the life vest in the life vest pouch p/n 313907100004;

Step 2.

Fix the inner lower side velcro of the pocket (1) to the inner upper side velcro (2) of the pocket

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 11 of 17

Step. 3 Place the red strip male Velcro (1) on the top Velcro (2) of the pocket, then the female Velcro of both the pocket and the red strip on the male Velcro of the upper side of the pocket (front beam). See the pictures sequence as reference.

AVIOINTERIORS SPA Via Appia Km 66,400 – 04013 Tor Tre Ponti – LATINA - ITALY

Rev. 2 dated 11/03/2019 Page 12 of 17

Step. 4 Check for proper installation:

- Absence of slacks

- Proper life vest storage

- Absence of interference with the seat structure, secondary parts (IFE units, cables, polycarbonate boxes if any)

- Absence of any “sag” or “embark”

ACCEPTABLE

NOT ACCEPTABLE

Pages 13–17 of 17