Copy · Bell Helicopter ASB 206L-09-157 Rev A · 5 pages

© Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2010-0865; AD 2021-15-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '849dcd83d3d7d497303deb8875d7d37c40bbc8bed8dcdea39de74c890ef8f236'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

DATE

ALERT SERVICE BULLETIN

REVISION NOTICE

AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT

IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER JUN 10, 2009

TO: All Owners/Operators of Bell 206L series Helicopters

SUBJECT: Revision “A” to Alert Service Bu lletin 206L-09-157: DISC ASSEMBLY 101584-2, RECALL OF

Revision “A” to this bulletin adds the date when Bell Helicopter has started to sell disc assembly 101584-2 through Spares to the DESCRIPTION section.

NO.

DA TE PAGE DATE REV

ALERT SERVICE BULLETIN

206L-09-157 JUN 10, 09 APR 20, 2009

AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT

IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER A 1 of 4

MODEL AFFECTED: 206L series

SUBJECT: DISC ASSEMBLY 101584-2, RECALL OF

HELICOPT ERS AFFECTED: 206L Helicopters serial number 45004 through 45153 and 46601 through 46617.

206L-1 Helicopters serial number 45154 through 45790.

206L-3 Helicopters serial number 51001 through 51612.

206L-4 Helicopters serial number 52001 and subsequent.

[All 206 helicopters deliver ed new form factory had disc assembly P/N 32721-1 installed at delivery]

-NOTE-

Each laminate of disc assembly 101584-2 is ink stamped with P/N 101584-1.

COMPLIANCE: PART I: F or disk assembly P/N 101584-2 in spares stock, immediately after receipt of this bulletin.

PART II: For disk assembly P/N 101584-2 installed on helicopter, within the next 100 hours after receipt of this bulletin but not to exceed 30 days.

DESCRIPTION:

Bell Helicopter found that new disc asse mbly P/N 101584-2 sold through Spares beginning March 2009 as an alternate to P/N 32721-1 does not conform to the approved Engineering. This Alert Service Bulletin mandates the removal from service of all disc assemblies P/N 101584-2.

A

ASB 206L-09-157 Page 2 of 4

APP ROVAL:

The engineering design aspects of this bulletin are Transport Canada Civil Aviation (TCCA) approved.

MANPOWER:

No additional man-hours are required to accomplish PART I of this bulletin.

Approximately 1.0 man-hour is required to replace each disc assembly that is affected by the ACCOMPLISHMENT INSTRUCTIONS PART II section of this bulletin. Manhours are based on hands-on time, and may vary with personnel and facilities available.

WARRANTY:

Owners / Operators of Bell Helicopters who comply with the instructions in this Bulletin will be eligible to receive a 100% credit towards replacement Disc Assemblies part number 32721-1.

To receive this credit:

• Comply with the instructions contained in this Bulletin no later than the applicable hours in the “compliance section” of this ASB, or no later than the March 31, 2010.

• Purchase replacement parts from a Bell approved source.

• Submit an MMIR to the Bell Warrant y Department referencing this ASB.

Customers who fail to comply with the inst ructions in this Bulletin before the March 31, 2010 are not eligible for the s pecial warranty credit listed above. There is no labor associated with this bulletin.

MATERIAL:

Required Material:

The following material is required for the ac complishment of this bulletin and may be obtained through your Bell Helicopter Textron Supply Center.

Part Number Nomenclature Quantity

32721-1 DISC ASSEMBLY A/R

ASB 206L-09-157 Page 3 of 4

SPECIAL TOOLS:

None required

ELECTRICAL LOAD DATA:

Not affecte d

REFERENCES:

BHT-206L-MM, Maintenance Manual BHT-206L1-MM, Maintenance Manual BHT-206L3-MM, Maintenance Manual BHT-206L4-MM, Maintenance Manual

PUBLICATIONS AFFECTED:

None affected

ACCOMPLISHMENT INSTRUCTIONS:

PART I: For disc assembly in spares stock

-NOTE-

Each laminate of disc assembly 101584-2 is ink stamped with P/N 101584-1.

1. Verify if disk assemblies in spare stock are identifi ed with P/N 101584-2. If a disc assembly is identified with P/N 101584-2, refer to the WARRANTY section of this bulletin.

PART II: Disc assembly installed on Helicopter

-NOTE-

Each laminate of disc assembly 101584-2 is ink stamped with P/N 101584-1.

1. Review helicopter records to determine if Disc Assembly P/N 101584-2 has been installed on the helicopter.

ASB 206L-09-157 Page 4 of 4

a. If helicopter records indicate that a Disc Assembly P/N 101584-2 has been installed, proceed with step 2.

b. If helicopter records review indicate s that no Disc Assembly P/N 101584-2 has been installed, proceed with step 3.

2. Gain access to the tail rotor drives haft system and replac e Disc Assembly P/N 101584-2 with serviceable Disc Assembly P/N 32721- 1 (BHT-206L-MM, Chapter

66) (BHT-206L1-MM, Chapter 66) (BHT- 206L3-MM, Chapter 65) (BHT-206L4-MM, Chapter 65).

3. Make a log book entry to indicate that this bulletin has been accomplished.