TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5eeed64d75d7d16c332f6e9f89d90de120f3921d1ad099918a6efc599c33e328' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5eeed64d75d7d16c332f6e9f89d90de120f3921d1ad099918a6efc599c33e328' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NO.
DATE PAGE DATE
ALERT SERVICE BULLETIN
A Subsidiary of Textron Inc.
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER 407-08-84 Aug. 18, 2008 1 of 26
MODEL AFFECTED: 407
SUBJECT: TAILBOOM A SSEMBLY 407-030-801-201, 407- 030-801-203 AND 407-030-801-205, NEW INSPECTION REQUIREMENTS.
HELICOPTERS AFFECTED: All model 407 helicopters with one of the subject tailbooms installed.
COMPLIANCE: PART I Immediately after receipt of this bulletin.
PART II At the next tailboom scheduled inspection and after every 300 flight-hours thereafter.
PART III Within 25 flight- hours or 30 days after accomplishment of Part I. This inspection will affect tailbooms which have accumulated 6900 flight-hours or more, tailbooms with unknown total flight-hours or tailbooms reaching 6900 flight-hours in service.
PART IV Within 25 flight-hours or 30 days after accomplishment of Part I. This inspection will affect tailbooms which have accumulated 8600 flight-hours or more, tailbooms with unknown total flight-hours or tailbooms reaching 8600 flight-hours in service.
DESCRIPTION:
Bell Helicopter Textron (BHT) has a ccomplished a thorough analysis of subject tailbooms which are built wit h chem-milled skins. This an alysis has revealed that areas with high stress concentration could ex ist on the subject tailboom. BHT has not received any field report indicating a crack ed skin in service on subject tailbooms.
However, in the interest of safety, BHT has elected to introduce a new inspection schedule to subject tailboom assemblies.
ASB 407-08-84 Page 2 of 26
PART I of this Alert Service Bulletin requires identification of the affected tailboom.
PART II of this bulletin provides the new 30 0-hour recurring inspection details for all subject tailbooms.
PART III of this bulletin provides additional in spection details for subject tailbooms which have accumulated 6900 flight-hours or more or with total flight-hours unknown. Operators have the option to meet the requirement of PART III with a 10X magnifying glass inspection (Option “A”) performed every 150 flight-hours thereafter or by an Eddy Current inspection method (O ption “B”) performed at every 500-hours interval.
PART IV of this bulletin provides additional in spection details for subject tailbooms which have accumulated 8600 flight-hours or more or with total flight-hours unknown. Operators have the option to meet the requirement of PART IV with a 10X magnifying glass inspection (Option “A”) pe rformed by maintenance personnel every 50 flight-hours thereafter or a visual check (Option “B”) performed daily by the pilot as part of his daily preflight check.
PART V of this bulletin provides the Instructions for Continued Airworthiness.
APPROVAL:
The engineering design aspects of this bulletin are TCCA approved.
MANPOWER:
PART I : Approximately 0.25 man-hour is required to accomplish PART I of this bulletin.
PART II: Approximately 2.5 man-hours are required to accomplish PART II of this bulletin.
PART III: Approximately 0.50 man-hour is required to accomplish PART III of this bulletin when done under Option “A” (10X magni fying glass inspection method) or 1.0 man-hour when done under Option “B” (Eddy Current inspection method).
PART IV: Approximately 0.25 man-hour is required to accomplish PART IV, Option “A” of this bulletin. There is no impact when Option “B” is selected and done as part of the pilot’s daily preflight check.
NOTE: Man-hours are based on hands-on time , and may vary with personnel and facilities available.
ASB 407-08-84 Page 3 of 26
WARRANTY:
There is no warranty associated with this bulletin.
MATERIAL:
Required Material:
None required.
Consumable Material:
For PART II, PART III and PART IV:
Aircraft soap (C-318) under MIL-C-87936, as required.
SPECIAL TOOLS:
For Part III, Option “B”(when selected): Eddy Current inspection equipment as described in paragraph 3.0 of Appendix “A”.
WEIGHT AND BALANCE:
Not affected
ELECTRICAL LOAD DATA:
Not affected
REFERENCES:
ASB 407-07-80 BHT-206-SRM-1 BHT-407-MM-1, Rev 24, Maintenance Manual, Chapter 4 BHT-407-MM-5, Rev 18, Maintenance Manual, Chapter 53 Corrosion Control Guide, Chapter 10 BHT-ALL-SPM, Rev. 2, dated 16 February, 2007
PUBLICATIONS AFFECTED:
BHT-407-MM-1, Rev 24, Maintenance Manual, Chapter 4
ASB 407-08-84 Page 4 of 26
ACCOMPLISHMENT INSTRUCTIONS:
PART I: Verification of affected tailboom:
1. Upon receipt of this bulletin, verify the helicopter technical records to determine if you have tailboom assembly part num ber 407-030-801-201, 407-030-801-203 or 407-030-801-205 installed on your helicopter. You can also physically confirm the tailboom Part Number by removing the aft driveshaft cover (Ref. Chapter 53 of the maintenance manual) and looki ng at the identification plate located near Boom Station (BS) 129 as shown in Figure 1.
2. If identification as per Step 1 indicates that your tailboom is P/N 407-030-801-107, 407-530-014-101 or 407- 530-014-103, refer to Chapter 4 of your maintenance manual for the inspection schedule appli cable to those tailboom assemblies.
Annotate the helicopter technical records to indicate that your tailboom is not affected by this bulletin.
3. If identification as per Step 1 above i ndicates that you have one of the subject tailboom assemblies, verify tailboom histor ical record sheet to determine total flight-hours of your tailboom.
-NOTE-
If the total flight-hours of your tailboom is unknown, it will be considered to have accumula ted beyond 8600 flight-hours and the requirements described under PART II , PART III and PART IV will apply
4. Once the total time in service is known;
a) For all subject tailbooms, regardless of their total time in service, accomplish inspection of your tailboom assembly as defined under PART II of this bulletin at the next scheduled inspection and every 300 flight-hours thereafter.
b) If your tailboom assembly has accumulated 6900 flight-hours or more or if the total time is unknown, incorporate into the inspection schedule of subject tailbooms defined under PART II, one of the additional in spections as defined under PART III within the next 25 fli ght-hours in service or 30 days, whichever occurs first and repeat at applicable interval shown.
c) If your tailboom assembly has accumulated more than 8600 flight-hours or if the total flight-hours is unknown, incor porate into the insp ection schedule of subject tailbooms defined under PART II and PART III , one of the additional
ASB 407-08-84 Page 5 of 26
inspections as defined under PART IV within 25 flight-hours or 30 days, whichever occurs first and repeat at applicable interval shown.
5. Annotate your technical record s to indicate at which time PART I of this bulletin was carried out.
PART II Inspection requirements at each 300-hour interval for all subject tailbooms:
1. Gain access to the areas to be inspected by removing both driveshaft covers and both gearbox fairings halves from your tailboom assembly. Refer to BHT-407-MM- 5, Chapter 53.
2. Clean the complete tailboom assembly (including the horizontal stabilizer, the two auxiliary finlets and the vertical fin) with aircraft soap (C-318) prepared in accordance with manufacturer’s recommendati ons to remove all traces of dirt, stains, exhaust residues and oil.
3. (Ref. Figure 2) Examine the complete tailboom assembly following every 300 flighthours of operation for general condition, loos e rivets, cracks or any other type of damage. Pay close attention to Areas “B”, “C”, “D”, “H” and “I” at the left side of the tailboom as indicated in Figure 2.
4. Inspect for loose rivets in region show n in Figure 2, Area “A” and especially at those shown in Details “E”, “F”, “G”, and in Areas “C”, “D”, “H” an d “I”. If a loose rivet or fastener is found, remove it per standard practices and inspect edges of hole for cracks using a 10X magnifying gla ss. If no crack is found, install correct diameter rivet or fastener (Ref. BHT-206-SRM-1, section 3).
5. If no loose rivets or fasteners are found, use a 10X magnifying glass and examine tailboom skin at edge of bearing hanger supports and around fa steners shown in Figure 2, Details “E”, “F”, “G”, and Areas “H” and “I”.
6. On left side of tailboom, use a 10X magnifying glass and examine tailboom skin just above edge of mating stabilizer upper a ttachment support as shown in Figure 2, Areas “C” and ”D”.
7. If no crack is found, annotat e the helicopter technical records to indicate that PART II of this bulletin is complied with and return the tailboom to flight status.
8. Repeat this inspection after every 300 flight-hours thereafter. When your tailboom reaches 6900 and 8600 flight-hours of serv ice, add respectively to this inspection schedule, the applicable recurring insp ection requirements as defined under PART III and PART IV of this bulletin.
ASB 407-08-84 Page 6 of 26
9. If any crack is found in Step 3 through St ep 6 above, replace the tailboom with a serviceable unit prior to next flight and notify Bell Helicopter Product Support Engineering department;
a) If another affected tailboom is installed on the helic opter, determine the total time in service of that tailboom and app ly appropriate inspection program as defined in this bulletin.
b) If the total flight-hours of your ta ilboom is unknown, accomplish inspection requirements described under PART II, PART III and PART IV before putting this tailboom in service and repeat at in tervals shown or selected until directed otherwise by BHT.
10. If corrosion is found, refer to Chapter 53 of your maintenance manual for negligible damage limits or contact Product Support Engineering with details for assistance.
PART III Additional inspection requireme nts for tailbooms with 6900 flighthours or more or with time unknown:
For tailbooms which have reached or exceeded 6900 flight-hours in service or with time unknown, in addition to PART II, incorporate to the inspec tion schedule, one of the following recurring inspections and repeat at the applicable interval shown;
Option “A” (10X Magnifying glass 150-hour recurring inspection):
-NOTE-
It is permissible to transfer from one inspection program to the other for maintenance scheduling convenience (ex:
Option “A” to Option “B). However, the inspection as described in the new program must be accomplished prior to next flight. Make an entry in t he helicopter records to show that you have transferred from one inspection option to the other for traceability.
-NOTE-
The following inspection must be repeated at a maximum of 150 flight-hours of time in se rvice. However, the aft driveshaft cover section from the tailboom assembly must be removed to gain proper access to the area to be inspected.
ASB 407-08-84 Page 7 of 26
1. Remove the aft driveshaft cover secti on in accordance with Chapter 53 of the maintenance manual.
2. Use a clean cloth moistened with airc raft soap (C-318) prepared in accordance with manufacturer’s recommendations, as required, to remove any exhaust residues or dirt from areas to inspect, as shown in Figure 2, Areas “H” and “I”.
3. On left side of tailboom, make sure that the tailboom skin is clean and that adequate lighting exists. Use a 10X m agnifying glass and examine tailboom around fasteners shown in Figure 2, Areas “H” and “I”.
4. If a crack is found, replace the tailboom with a serviceable unit prior to next flight and notify Bell Helicopter Product Support Engineering department;
a) If another affected tailboom is installed on the helic opter, determine the total time in service of that tailboom and apply appropriate inspection program as defined in this bulletin.
b) If the total flight-hours of your ta ilboom is unknown, accomplish inspection requirements described under PART II, PART III and PART IV before putting this tailboom in service and repeat at in tervals shown or selected until directed otherwise by BHT.
5. If no crack is found, the intent of PART III is complete.
6. Make an entry in the helicopter records to show that PART III, Option “A” of this bulletin is completed.
7. Repeat this inspection after ev ery 150 flight-hours thereafter.
8. When your tailboom reaches 8600 flig ht-hours, one of the additional recurring inspection requirements defined under PART IV must apply.
Option “B” (Eddy Current 500-hour recurring inspection);
-NOTE-
It is permissible to transfer from one inspection program to the other for maintenance scheduling convenience (ex:
Option “B” to Option “A). However, the inspection as described in the new program must be accomplished prior to next flight. Make an entry in t he helicopter records to show that you have transferred from one inspection option to the other for traceability.
ASB 407-08-84 Page 8 of 26
-NOTE-
The following inspection must be repeated at a maximum of 500 flight-hours of time in se rvice. However, the aft driveshaft cover section from the tailboom assembly must be removed to gain proper access to the area to be inspected.
1. Remove the aft driveshaft cover secti on in accordance wit h Chapter 53 of the maintenance manual.
2. Use a clean cloth moistened with airc raft soap (C-318) prepared in accordance with manufacturer’s recommendations, as required, to remove any exhaust residues or dirt from areas to inspect, as shown in Figure 2, Areas “H” and “I”.
3. Refer to Appendix “A” to set and calibra te the Eddy Current inspection equipment.
4. On left side of tailboom, make sure that the tailboom skin is clean and inspect tailboom skin around fasteners heads in t he shaded areas shown in Figure 2, Areas “H” and “I”.
5. If a crack is detected, replace the tailb oom with a serviceable unit prior to next flight and notify Bell Helicopter Product Support Engineering department;
a) If another affected tailboom is installed on the helic opter, determine the total time in service of that tailboom and app ly appropriate inspection program as defined in this bulletin.
b) If the total flight-hours of your ta ilboom is unknown, accomplish inspection requirements described under PART II, PART III and PART IV before putting this tailboom in service and repeat at in tervals shown or selected until directed otherwise by BHT.
6. If no crack is found, the intent of PART III is complete.
7. Make an entry in the helicopter records to show that PART III, Option “B” of this bulletin is completed.
8. Repeat this inspection after ev ery 500 flight-hours thereafter.
9. When your tailboom reaches 8600 flight -hours, one of the additional recurring inspection requirements defined under PART IV must apply.
ASB 407-08-84 Page 9 of 26
PART IV Additional inspection require ments for tailbooms with 8600 flighthours or more or with time unknown:
For tailbooms which have reached or exce eded 8600 flight-hours or with total flighthours unknown, in addition to PART II and PART III, incorporate to the inspection schedule, one of the following recurring in spections and repeat at the applicable interval shown;
Option “A” (10X Magnifying glass 50-Hour recurring inspection):
-NOTE-
It is permissible to transfer from one inspection program to the other for maintenance scheduling convenience (ex:
Option “A” to Option “B). However, the inspection as described in the new program must be accomplished prior to next flight. Make an entry in t he helicopter records to show that you have transferred from one inspection option to the other for traceability.
1. Use a clean cloth moistened with airc raft soap (C-318) prepared in accordance with manufacturer’s recommendations, as required, to remove any exhaust residues or dirt from both Areas “C” and “D” to look at, as shown in Figure 2.
2. On left side of tailboom, make sure that the tailboom skin is clean and that adequate lighting exists. Use a 10X m agnifying glass and examine tailboom around fasteners and just above the edge of upper stabilizer support as shown in Figure 2, Areas “C” and ”D”.
3. If a crack is found, replace the tailboom with a serviceable unit prior to next flight and notify Bell Helicopter Product Support Engineering department;
a) If another affected tailboom is installed on the helic opter, determine the total time in service of that tailboom and app ly appropriate inspection program as defined in this bulletin.
b) If the total flight-time of your ta ilboom is unknown, accomplish inspection requirements described under PART II, PART III and PART IV before putting this tailboom in service and repeat at in tervals shown or selected until directed otherwise by BHT.
4. If no crack is found, the intent of PART IV is complete.
5. Make an entry in the helic opter records to show that PART IV, Option “A” of this bulletin is completed.
ASB 407-08-84 Page 10 of 26
6. Repeat this inspection after ev ery 50 flight-hours thereafter.
Option “B” (Daily recurring check):
-NOTE-
This inspection can be performed by the pilot as part of his preflight check with paint/primer still present at the affected areas.
-NOTE-
It is permissible to transfer from one inspection program to the other for maintenance scheduling convenience (ex:
Option “B” to Option “A). However, the inspection as described in the new program must be accomplished prior to next flight. Make an entry in t he helicopter records to show that you have transferred from one inspection option to the other for traceability.
1. Use a clean cloth moistened with airc raft soap (C-318) prepared in accordance with manufacturer’s recommendations, as required, to remove any exhaust residues or dirt from both Areas “C” and “D” to look at, as shown in Figure 2.
2. On left side of tailboom, make sure that the tailboom skin is clean and that adequate lighting exists. Examine tailboom around fasteners and just above the edge of upper stabilizer support in the shad ed areas shown in Figure 2, Areas “C” and “D”.
3. If a crack is found, replace the tailboom with a serviceable unit prior to next flight and notify Bell Helicopter Product Support Engineering department;
a) If another affected tailboom is installed on the helic opter, determine the total time in service of that tailboom and app ly appropriate inspection program as defined in this bulletin.
b) If the total flight-time of your ta ilboom is unknown, accomplish inspection requirements described under PART II, PART III and PART IV before putting this tailboom in service and repeat at in tervals shown or selected until directed otherwise by BHT.
4. If no crack is found, the intent of PART IV is complete.
5. Make an entry in the helic opter records to show that PART IV, Option “B” of this bulletin is completed.
ASB 407-08-84 Page 11 of 26
6. Repeat this inspection before firs t flight of each day thereafter.
PART V Instructions for Continued Airworthiness
1. Maintain your tailboom in accordanc e with your 407 Main tenance Manual BHT- 407-MM-1 and the BHT corrosion control guide CSSD-PSE-87-001.
2. Inspect your tailboom as per applicabl e requirements and recurring intervals as described herein.
ASB 407-08-84 Page 12 of 26 BS
125.74 REF
- TAILBOOM DATA PLATE IDENTIFICATION
LOOKING DOWN AT TAILBOOM 08538_01 Figure 1. Location of identification plate, tailbooms 407-030-801-201, 407- 030-801-203 or 407-030-801-205.