TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '574c739c69403406c10f379dc6f227d41f80895ab07c2dac4708350fc19e8f32' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '574c739c69403406c10f379dc6f227d41f80895ab07c2dac4708350fc19e8f32' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT
COO FILLER B CUT OUT AREA € 67
AND FILLER C
2) 3) ANGLE C
FRAME SHEAR TIE
FAILSAFE CHORD
FOR CUT OUT ACROSS ENTIRE SECTION /D (BELOW S-8L) B-B 2291747 FIGURE 13: LEFT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 7 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 737-25A1544 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details. 125 of 202
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one body frame.
More DataQtyIdentificationNameTaskStep
(a)(b)(g)1ANGLE CREPAIR ANGLE CMake1 From the annealed condition to the T6 condition after forming.
1ANGLE CREPAIR ANGLE CHeat Treat2
(c)1ANGLE CREPAIR ANGLE CInspect3
(d)(e)(g)1FILLER BFILLERMake4
(c)(f)(g)1FILLER CFILLERMake5
(h)-TYPE 2, CLASS ACHEMICAL CONVER-
SION COATING Apply6
(i)-BMS 10-11, TYPE 1PRIMERApply7
(a) If the existing frame web is 0.056 inch thick, make Repair Angle C from 0.063 inch thick 7075-0 clad sheet with minimum bend radius of 0.12 inch. If the existing frame web is 0.071 inch thick, make Repair Angle C from 0.080 inch thick 7075-0 clad sheet with minimum bend radius of 0.19 inch. Form the repair angles in the annealed condition to match the contour of the frame in accordance with 737-600 SRM 51-30-01, 737-700 SRM 51-30-01, 737-800 SRM 51-30-01, 737-800BCF SRM 51-30-01 or 737-900 SRM 51-30-
01.
(b) Make sure that the length of the repair angle is sufficient to have a minimum of five rows of fasteners common to the frame inboard flange and a minimum of five rows of fasteners common to the frame web above and below the cut out area.
(c) Do a dye penetrant inspection of the bend radius to make sure there is no crack. Refer to SOPM 20-20- 02 as an accepted procedure.
(d) Make Filler B from 0.050 inch thick 7075-T6 clad sheet. Make sure that Filler B has the same thickness as the frame shear tie.
(e) Extend Filler B one row of fasteners beyond Repair Angle C on either side of the repair area.
(f) Make Filler C from 7075-T6 clad sheet or from 7075-0 clad sheet if it need to be form, that has the same thickness as the existing frame. Filler C can be formed with minimum bend radius of 0.19 inch. Form in the annealed condition to match the contour of the frame in accordance with 737-600 SRM 51-30-01, 737-700 SRM 51-30-01, 737-700IGW SRM 51-30-01, 737-800 SRM 51-30-01, 737-800BCF SRM 51-30- 01 or 737-900 SRM 51-30-01, and heat treat to T6.
(g) Maintain a 0.50 inch minimum corner radius. Maintain a minimum 2D edge margin. Maintain 63 microinches Ra or better surface finish on all cut surfaces. Break sharp edges. Make sure that the repair parts do not end common to the stringer clip. Extending the repair parts one row of fasteners beyond the stringer clip is acceptable.
(h) Apply chemical conversion coating to all bare aluminum surfaces. Refer to SOPM 20-43-03 as an accepted procedure.
FIGURE 13: LEFT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 8 OF 9) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 04, 2006 737-25A1544Revision 4 February 15, 2022 126 of 202 BOEING SERVICE BULLETIN 737-25A1544
ALERTALERT
More DataQtyIdentificationNameTaskStep
(i) Apply two layers of BMS 10-11, Type 1 primer to all surfaces where chemical conversion coating was applied. Refer to SOPM 20-41-02 as an accepted procedure.
FIGURE 13: LEFT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 9 OF 9) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 04, 2006 737-25A1544Revision 4 February 15, 2022 127 of 202 BOEING SERVICE BULLETIN 737-25A1544
ALERTALERT
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT This Figure applies only to: Group 1-4, 6.
STA 907 4O1 FILLER B -- S-7R FRAME
SHEAR TIE
SUPPORT
FITTING
STRINGER CLIP
•- S-8R
SUPPORT BRACKET FRAME
MAXIMUM 67 CUT OUT AREA AND
FILLER C ANGLEC Q23
FAILSAFE CHORD
FRAME SHEAR TIE
- S-9R INBD STA 907 2293611 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 1 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 737-25A1544 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details. 128 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT
FILLER B COO FRAME ANGLE C O2
FRAME SHEAR TIE
FAILSAFE CHORD
ABOVE AND BELOW THE
CUT OUT AREA (TYPICAL) FWD A-A 2293613 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 2 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 737-25A1544 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details. 129 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT FILLER B 46 — FRAME 1OO AND PILLARCA
OUTBOARD HOLE
ANGLEC CO - FRAME
FRAME SHEAR TIE
FAILSAFE CHORD
FOR CUT OUT ONLY AT INBOARD HOLE (BELOW S-8R) -WD B-B 2293625 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 3 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 Export Controlled ECCN: 9E991 737-25A1544 Copyright © Unpublished Work - See page 1 for details. 130 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT
FILLER B COO FRAME
INBOARD HOLE ANGLEC OO® 16X7) CUT OUT ARE AND FILLER O
FRAME SHEAR TIE
• FAILSAFE CHORD
FOR CUT OUT ONLY AT OUTBOARD HOLE (BELOW S-8R) -WD B-B 2293627 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 4 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 Export Controlled ECCN: 9E991 737-25A1544 Copyright © Unpublished Work - See page 1 for details. 131 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT FILLER B 46 O FRAME
SOO ANT ALL AREA ANGLE C Q2
FRAME SHEAR TIE
FAILSAFE CHORD FWD
FOR CUT OUT AT INBOARD AND OUTBOARD HOLE (BELOW S-8R) B-B 2293630 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 5 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 Export Controlled ECCN: 9E991 737-25A1544 Copyright © Unpublished Work - See page 1 for details. 132 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT
FILLER B COO 16X7) CUT OUT ARE AND FILLER (
OUTBOARD HOLE ANGLE C 2O0 - FRAME
FRAME SHEAR TIE
FAILSAFE CHORD
FOR CUT OUT ONLY AT INBOARD
HOLE AND INNER FLANGE (BELOW S-8R) -WD B-B 2293631 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 6 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 737-25A1544 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details. 133 of 202
BOEING SERVICE BULLETIN 737-25A1544
ALERT ALERT FILLER B 4€ ĐOO AND PILL AREA
ANGLE COO J
FRAME SHEAR TIE → FAILSAFE CHORD
FOR CUT OUT ACROSS ENTIRE SECTION (BELOW S-8R) -WD B-B 2293633 FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 7 OF 9) Original Issue: October 04, 2006 Revision 4 February 15, 2022 Export Controlled ECCN: 9E991 737-25A1544 Copyright © Unpublished Work - See page 1 for details. 134 of 202
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one body frame.
More DataQtyIdentificationNameTaskStep
(a)(b)(g)1ANGLE CREPAIR ANGLE CMake1 From the annealed condition to the T6 condition after forming.
1ANGLE CREPAIR ANGLE CHeat Treat2
(c)1ANGLE CREPAIR ANGLE CInspect3
(d)(e)(g)1FILLER BFILLERMake4
(c)(f)(g)1FILLER CFILLERMake5
(h)-TYPE 2, CLASS ACHEMICAL CONVER-
SION COATING Apply6
(i)-BMS 10-11, TYPE 1PRIMERApply7
(a) If the existing frame web is 0.056 inch thick, make Repair Angle C from 0.063 inch thick 7075-0 clad sheet with minimum bend radius of 0.12 inch. If the existing frame web is 0.071 inch thick, make Repair Angle C from 0.080 inch thick 7075-0 clad sheet with minimum bend radius of 0.19 inch. Form the repair angles in the annealed condition to match the contour of the frame in accordance with 737-600 SRM 51-30-01, 737-700 SRM 51-30-01, 737-800 SRM 51-30-01, 737-800BCF SRM 51-30-01 or 737-900 SRM 51-30-
01.
(b) Make sure that the length of the repair angle is sufficient to have a minimum of five rows of fasteners common to the frame inboard flange and a minimum of five rows of fasteners common to the frame web above and below the cut out area.
(c) Do a dye penetrant inspection of the bend radius to make sure there is no crack. Refer to SOPM 20-20- 02 as an accepted procedure.
(d) Make Filler B from 0.050 inch thick 7075-T6 clad sheet. Make sure that Filler B has the same thickness as the frame shear tie.
(e) Extend Filler B one row of fasteners beyond Repair Angle C on either side of the repair area.
(f) Make Filler C from 7075-T6 clad sheet or from 7075-0 clad sheet if it need to be form, that has the same thickness as the existing frame. Filler C can be formed with minimum bend radius of 0.19 inch. Form in the annealed condition to match the contour of the frame in accordance with 737-600 SRM 51-30-01, 737-700 SRM 51-30-01, 737-700IGW SRM 51-30-01, 737-800 SRM 51-30-01, 737-800BCF SRM 51-30- 01 or 737-900 SRM 51-30-01, and heat treat to T6.
(g) Maintain a 0.50 inch minimum corner radius. Maintain a minimum 2D edge margin. Maintain 63 microinches Ra or better surface finish on all cut surfaces. Break sharp edges. Make sure that the repair parts do not end common to the stringer clip. Extending the repair parts one row of fasteners beyond the stringer clip is acceptable.
(h) Apply chemical conversion coating to all bare aluminum surfaces. Refer to SOPM 20-43-03 as an accepted procedure.
FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 8 OF 9) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 04, 2006 737-25A1544Revision 4 February 15, 2022 135 of 202 BOEING SERVICE BULLETIN 737-25A1544
ALERTALERT
More DataQtyIdentificationNameTaskStep
(i) Apply two layers of BMS 10-11, Type 1 primer to all surfaces where chemical conversion coating was applied. Refer to SOPM 20-41-02 as an accepted procedure.
FIGURE 14: RIGHT SIDE, STA 907 FRAME, SUPPORT BRACKET ATTACHMENT HOLES AT THE AIR CONDITIONING EXTRUSION - MAKE REPAIR PARTS (OPTION 1) (SHEET 9 OF 9) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 04, 2006 737-25A1544Revision 4 February 15, 2022 136 of 202 BOEING SERVICE BULLETIN 737-25A1544