Copy · U.S. DOT/FAA - Service Bulletin · 83 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0415; AD 2011-27-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b8153b5e3b7cb746cc919574cc521eb2f2bf9db6f5efcf73cc6aadcc238ac984'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin ALERT Number: 737-27A1278 Original Issue: May 24, 2007 Revision 1: January 07, 2010 ATA System: 2741 SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer Trim Control System - Ballscrew and Ball Nut Inspection and Lubrication Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2007 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 1 of 83

5.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 2 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary9

1. PLANNING INFORMATION ........................................ 1 5 A. Effectivity ............................................... 1 5

1. Airplanes ............................................ 1 5

2. Spares Affected ........................................ 2 8 B. Concurrent Requirements ...................................... 2 9 C. Reason ................................................ 2 9 D. Description .............................................. 3 1 E. Compliance .............................................. 3 4 F. Approval ............................................... 3 8 G. Manpower .............................................. 3 8 H. Weight and Balance Changes .................................... 3 9 I. Electrical Load Data ......................................... 3 9 J. References .............................................. 3 9

1. Existing Data: ......................................... 3 9

2. Data supplied with this Service Bulletin: ........................... 4 0

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 0 K. Publications Affected ........................................ 4 1 L. Interchangeability and Intermixability of Parts ........................... 4 1

2. MATERIAL INFORMATION ........................................ 4 3 A. Material - Price and Availability ................................... 4 3 B. Industry Support Information .................................... 4 3 C. Parts Necessary For Each Airplane ................................. 4 3

1. Kits/Parts: ........................................... 4 3

2. Parts and Materials Supplied by the Operator: ........................ 4 3

3. Parts Modified and Reidentified: ............................... 4 4

4. Parts Removed and Not Replaced: .............................. 4 4 D. Parts Necessary to Change Spares ................................. 4 4 E. Special Tooling - Price and Availability ............................... 4 4 F. Special Tooling Necessary to do this Service Bulletin ....................... 4 4

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 5 A. GENERAL INFORMATION ..................................... 4 5 B. WORK INSTRUCTIONS ....................................... 4 6 FIGURE 1: HORIZONTAL STABILIZER TRIM ACTUATOR - DETAILED INSPECTION OF THE BALLSCREW, BALL NUT, AND THE ATTACHMENT FITTINGS- (GROUP 1 CONFIGURATION 1, GROUP 2 CONFIGURATION 1, AND GROUP 3 AIRPLANES) [Group 1-2, Configuration 1;

Group 3] ............................................. 5 9 FIGURE 2: HORIZONTAL STABILIZER TRIM ACTUATOR - DETAILED INSPECTION OF THE BALLSCREW, BALL NUT, AND THE ATTACHMENT FITTINGS - (GROUP 1, CONFIGURATION 2 AIRPLANES) [Group 1, Configuration 2] .......................... 6 3 FIGURE 3: HORIZONTAL STABILIZER TRIM ACTUATOR - DETAILED INSPECTION OF THE BALLSCREW, BALL NUT, AND, AND THE ATTACHMENT FITTINGS - (GROUP 2, CONFIGURATION 2 AIRPLANES) [Group 2, Configuration 2] ............... 6 7

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 3 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

FIGURE 4: LUBRICATION OF THE HORIZONTAL STABILIZER TRIM ACTUATOR (GROUP 1 CONFIGURATION 1, GROUP 2 CONFIGURATION 1, AND GROUP 3 AIRPLANES) [Group 1-2, Configuration 1; Group 3] ................................. 7 1 FIGURE 5: LUBRICATION OF THE HORIZONTAL STABILIZER TRIM ACTUATOR (GROUP 1, CONFIGURATION 2 AIRPLANES) [Group 1, Configuration 2] ............... 7 3 FIGURE 6: LUBRICATION OF THE HORIZONTAL STABILIZER TRIM ACTUATOR (GROUP 2, CONFIGURATION 2 AIRPLANES) [Group 2, Configuration 2] ............... 7 5 FIGURE 7: HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW AND BALL NUT - REPAIR/REPLACE - (GROUP 1 CONFIGURATION 1, GROUP 2 CONFIGURATION 1, AND GROUP 3 AIRPLANES) [Group 1-2, Configuration 1; Group 3] ............... 7 7 FIGURE 8: HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW AND BALL NUT - REPAIR/REPLACE - (GROUP 1, CONFIGURATION 2 AIRPLANES) [Group 1, Configuration 2 ] ................................................ 7 9 FIGURE 9: HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW AND BALL NUT - REPAIR/REPLACE - (GROUP 2, CONFIGURATION 2 AIRPLANES) [Group 2, Configuration 2 ] ................................................ 8 1 Appendix A: INSPECTION REPORT FORM FOR SB 737-27A1278 ................... 8 3

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 4 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

Commercial Airplanes 737 Service Bulletin ALERT Revision Transmittal SheetNumber: 737-27A1278Original Issue: May 24, 2007 Revision 1: January 07, 2010 ATA System: 2741 SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer Trim Control System - Ballscrew and Ball Nut Inspection and Lubrication This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on airplanes changed as shown in the original issue of this service bulletin. However, Operators have to continue to do the repeat Detailed Inspection, Lubrication, and Overhaul in accordance with Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

Federal Aviation Administration (FAA) Notice of Proposed Rule Making FAA NPRM 2007-NM-256-AD, is related to this service bulletin.

NOTE: The Operators that performed the initial Detailed Inspection, Lubrification, and Overhaul do not have to do another initial inspection, but have to continue to do the repeat Detailed Inspection, Lubrication, and Overhaul of the Horizontal Stabilizer Trim Actuator in accordance with Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

The Operators that incorporated service bulletin UMBRA CUSCINETTI, S.p.A. SB 07322-27-01 or service bulletin LINEAR MOTION, LLC SB 7901708 or service bulletin SKYTRONICS, Inc. SB 93004 as given in WORK PACKAGE 4, have to continue to do the repeat Detailed Inspection, Lubrication, and Overhaul of the Horizontal Stabilizer Trim Actuator in accordance with Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

The Operators that did not incorporate UMBRA CUSCINETTI S.p.A. or LINEAR MOTION LLC or SKYTRONIC INC service bulletin, have to incorporate service bulletin UMBRA CUSCINETTI, S.p.A.

SB 07322-27-01 or service bulletin LINEAR MOTION, LLC SB 7901708 or service bulletin SKYTRONICS, Inc. SB 93004 as given in WORK PACKAGE 4, and have to continue to do the repeat Detailed Inspection, Lubrication, and Overhaul of the Horizontal Stabilizer Trim Actuator in accordance with Paragraph 1.E., Compliance, Table 1 or Table 2 as applicable.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 5 of 83

REASON FOR REVISION This revision is sent to correct the work instructions for the HSTA name plate identification information in WORK PACKAGE 4 and to clarify some of the inspections necessary in WORK PACKAGE 1 and WORK PACKAGE

2. A note is also added in the compliance table to advise operators to do the lubrication task during the detailed inspection task. In addition, reference to the "Horizontal Stabilizer Gearbox End Play Test as given OHM 27-45-11" is added. This is because the Horizontal Stabilizer Gearbox Backlash Inspection is only given in the AMM for 737-600/700/800/900 airplane. The (OHM) Horizontal Stabilizer Gearbox End Play Test is a similar test and is applicable to all 737-100/200/300/400/500 airplane variants.

These sections are changed:

1. Paragraph 1.D., Description: Affected Maintenance Zones are added for each airplane group.

2. Paragraph 1.E., Compliance: Notes (a) and (b) are added to Table 1 and Table 2 to recommend operators to do a lubrication task during the detailed inspection task.

3. Paragraph 1.E., Compliance: Notice of Propose Rule Making 2007-NM-256-AD is added.

4. Paragraph 1.K., Publications Affected: Added Damage Tolerance Based Structural Inspection statement.

5. Paragraph 3.A, General Information: General Visual Inspection note added.

6. Paragraph 3.B, Work Instructions:

a. WORK PACKAGE 1:

– Added some notes, added more data to some step instructions, deleted some unnecessary step instructions and correctly re-sequenced the steps.

b. WORK PACKAGE 2:

– Added some notes, added more data to some step instructions, deleted some unnecessary step instructions and correctly re-sequenced the steps.

c. WORK PACKAGE 4:

– Step 1.a. revised to reference SB 737-27A1278 WORK PACKAGE 4 instead of 737-27A1278 WORK PACKAGE 3.

– Step 2.a. revised to reference SB 737-27A1278 WORK PACKAGE 4 instead of 737-27A1278 WORK PACKAGE 3.

– Step 3.b. revised to reference SB 737-27A1278 WORK PACKAGE 4 instead of 737-27A1278 WORK PACKAGE 3.

7. FIGURE 1: Step 10, inspection for large amount of grease that exits the Ball Nut and note (a) are removed.

8. FIGURE 2: Step 10, inspection for large amount of grease that exits the Ball Nut and note (a) are removed.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 6 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

9. FIGURE 7 sheet 2: Step 4, reference to Aircraft Maintenance Manual (AMM) removed and replaced with internal reference note (b). Also the step table note (b) is revised to reference Horizontal Stabilizer Gearbox End Play Test as given in OHM 27-45-11 instead of the Horizontal Stabilizer Gearbox Backlash inspection as given in AMM 27-41-81/606.

10. FIGURE 8 sheet 2: Step 4, reference to Aircraft Maintenance Manual (AMM) removed and replaced with internal reference note (b). Also the step table note (b) is revised to reference Horizontal Stabilizer Gearbox End Play Test as given in OHM 27-45-11 instead of the Horizontal Stabilizer Gearbox Backlash inspection as given in AMM 27-41-81/606.

11. FIGURE 9 sheet 2: Step 4, reference to Aircraft Maintenance Manual (AMM) removed and replaced with internal reference note (b). Also the step table note (b) is revised to reference Horizontal Stabilizer Gearbox End Play Test as given in OHM 27-45-11 instead of the Horizontal Stabilizer Gearbox Backlash inspection as given in AMM 27-41-81/606.

The data given in Information Notice 737-27A1278 IN 01 is included in this revision.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY May 24, 2007Original Issue:

January 07, 2010Revision 1:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 7 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 8 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

BLANK PAGE

Commercial Airplanes 737 Service Bulletin ALERT SummaryNumber: 737-27A1278Original Issue: May 24, 2007 Revision 1: January 07, 2010 ATA System: 2741 SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer Trim Control System - Ballscrew and Ball Nut Inspection and Lubrication

THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin is being issued to maintain the frequency of the detailed inspection of the Horizontal Stabilizer Trim Actuator (HSTA) Ballscrew and Ball Nut as specified in the Maintenance Planning Document. This service bulletin also gives instructions to remove/replace and repair the Horizontal Stabilizer Trim Actuator if a damaged Ballscrew or Ball Nut is found. This service bulletin also adds the recommended intervals for repeat lubrication and overhaul. Also, this service bulletin gives recommended compliance time for incorporation of the suppliers service bulletins (service bulletin UMBRA CUSCINETTI, S.p.A. SB 07322-27-01, service bulletin LINEAR MOTION, LLC SB 7901708, and service bulletin SKYTRONICS, Inc. SB 93004). The UMBRA CUSCINETTI supplier service bulletin provides instructions to remove and replace the Ball Nut Tube Retainers on the 737 Horizontal Stabilizer Trim Actuator Ballscrew assembly with new Tube Retainers. The LINEAR MOTION supplier service bulletin provides instructions to remove and replace the Ball Deflectors and the Ball Return Guide Clamps on 737 Horizontal Stabilizer Trim Actuator Ballscrew assembly with new Ball Deflectors and Ball Return Guide Clamps. The SKYTRONICS supplier service bulletin provides instructions to remove and replace the Return Tube Clamps on the 737 Horizontal Stabilizer Trim Actuator Ballscrew assembly with new Return Tube Clamps.

The new parts installed will have sufficient stiffness to retain the load carrying balls in all known failure mode conditions. The changes given in this bulletin will reduce the probability of loss of the primary and secondary load paths of the Stabilizer Trim Actuator. Loss of primary and secondary load paths of the Stabilizer Trim Actuator could result in the loss of control of the airplane.

This Service Bulletin also specifies the time for incorporation of the Boeing Service Bulletin 737-27-1046 Revision 1 (as applicable), dated April 5, 1974, if the service bulletin is not already incorporated. Boeing Service Bulletin 737-27-1046 Revision 1 applies to airplanes 737-100/200 with oil lubricators and provides instructions for removing the existing oil lubricators and installation of a grease fitting on the Horizontal Stabilizer Trim Actuator Ball Nut.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 9 of 83

NOTE: The Horizontal Stabilizer Trim Actuator Ballscrew Assembly 102J033-1 or 102J033-1 (OS) with Oil Lubricator can not be reworked to a Horizontal Stabilizer Trim Actuator Ballscrew Assembly with grease lubrication fitting as given in Boeing Service Bulletin 737-27-1046 Revision 1. Remove these Stabilizer Trim Actuator Ballscrew Assemblies with Oil Lubricator and install 102J033-3 or 102J033-502 Horizontal Stabilizer Trim Actuator Ballscrew Assembly This service bulletin is being issued to maintain the frequency of the detailed visual inspection of the Horizontal Stabilizer Trim Actuator Ballscrew and Ball Nut as specified in the Maintenance Planning Document. This service bulletin also gives instructions to remove/replace and repair the Horizontal Stabilizer Trim Actuator if a damaged Ballscrew or Ball Nut is found. This service bulletin also adds the recommended intervals for repeat lubrication and overhaul.

After a Horizontal Stabilizer jackscrew incident related to a MD-80 airplane, Boeing initiated a design review of the Boeing heritage horizontal stabilizer ballscrew primary and secondary load paths. During this review, one 757 operator reported a Horizontal Stabilizer Ballscrew with extensive corrosion. An investigation was initiated.

This investigation identified that a maintenance procedure to check the stabilizer Ballscrew primary load path was required. In addition, the design review found that the Ball Nut Tube Retainers on the 737 Horizontal Stabilizer Trim Actuator should be stiffened, so that the balls are retained within the assembly when the balls are jammed and not free to circulate.

NOTE: Boeing also recommends that the Maintenance Planning Document (MPD) intervals be observed for the "Lubrication" and "Detailed Inspection" actions prior to compliance with this service bulletin. The "Lubrication" and "Detailed Inspection" done as given in this service bulletin satisfy the "Lubrication" and "Detailed Inspection" requirements given in Maintenance Planning Document" (MPD).

Boeing Service Related Problem (SRP) 737CL-SRP-27-0153 is related to this bulletin.

ACTION (PRR 35005-261RS) Get access to the Horizontal Stabilizer Trim Actuator and do the procedures that follow below at the intervals shown in the compliance section.

1. DETAILED INSPECTION:

– Do the Detailed Inspection as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 1 or WORK PACKAGE 2 (as applicable).

LUBRICATE THE HORIZONTAL TRIM ACTUATOR:

– Do the lubrication as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 1 or WORK PACKAGE 2 (as applicable).

REMOVE and REPAIR/REPLACE THE HORIZONTAL TRIM ACTUATOR: Remove/Replace the Horizontal Stabilizer Trim Actuator if damage is found as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 1 or WORK PACKAGE 2 (as applicable).

NOTE: As an option, Operators can replace a damaged Horizontal Stabilizer Trim Actuator with a serviceable Stabilizer Trim Actuator that is not new or not overhauled. Before the next flight, do the Detailed Inspection and Lubrication for the replacement Stabilizer Trim Actuator as given in this service bulletin and do the End Play Test as given in OHM 27-45-11. After the installation follow the requirements of this service bulletin.

2. For airplanes with Horizontal Stabilizer Trim Actuator Ballscrew Assemblies with Oil Lubricators:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 10 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

a. CHECK the Horizontal Stabilizer Trim Actuator Ballscrew Assy Part Number. If you find Horizontal Stabilizer Trim Actuator Ballscrew Assemblies 102J033-1 (Boeing Part Number 10-61302-1) or 102J033-1 (OS) (Boeing Part Number 10-61302-1), remove and install Stabilizer Ballscrew Assy 102J033-3 (Boeing Part Number 10-61302-2) or 102J033-502 (Boeing Part Number 10-61302-7) as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 3.

NOTE: The Horizontal Stabilizer Trim Actuator Ballscrew Assembly 102J033-1 or 102J033-1 (OS) with Oil Lubricator can not be reworked to a Horizontal Stabilizer Trim Actuator Ballscrew Assembly with grease lubrication fitting as given in Service Bulletin 737-27-1046 Revision 1.

The 102J033-3 (Boeing Part Number 10-61302-2) is an oil lubricated Horizontal Stabilizer Trim Actuator Ballscrew Assembly and operators have to incorporate Boeing Service Bulletin 737-27-1046 Revision 1 and the SKYTRONICS, Inc. SB 93004. The 102J033-502 (Boeing Part Number 10-61302-7) is a grease lubricated Horizontal Stabilizer Trim Actuator Ballscrew Assembly with reinforced Return Tube Clamps, and Operators do not have to incorporate Boeing Service Bulletin 737-27-1046 Revision 1 and service bulletin SKYTRONICS, Inc. SB 93004.

b. INCORPORATE BOEING SERVICE BULLETIN 737-27-1046 Revision 1 as applicable: Incorporate SB 737-27-1046 Revision 1 as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 3.

NOTE: Service Bulletin 737-27-1046 Revision 1 is applicable for some 737-100/200 airplanes with Ballscrew Oil Lubricators. This Service Bulletin provides instructions for the removal of the existing Oil Lubricators and the installation of a grease fitting on the Horizontal Stabilizer Trim Actuator Ball Nut. The Horizontal Stabilizer Trim Actuator Ballscrew Assembly 102J033-1 or 102J033-1 (OS) with Oil Lubricator can not be reworked to a Horizontal Stabilizer Trim Actuator Ballscrew Assembly with grease lubrication fitting.

3. INCORPORATE ONE OF THE FOLLOWING SUPPLIER SERVICE BULLETINS as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 4:

– UMBRA CUSCINETTI, S.p.A. SB 07322-27-01, Rev 00, Dated December 21, 2004: Install the new Ball Nut Tube Retainers as given in this supplier service bulletin.

– LINEAR MOTION, LLC SB 7901708, Dated July 26, 2005: Install the new Ball Deflectors and Ball Return Guide Clamps as given in this supplier service bulletin.

– SKYTRONICS, Inc. SB 93004, Dated September 01, 2005: Install the new Return Tube Clamps as given in this supplier service bulletin.

4. REMOVE AND REPAIR/OVERHAUL THE HORIZONTAL STABILIZER TRIM ACTUATOR:

– Remove and repair/overhaul the Horizontal Stabilizer Trim Actuator as given in Accomplishment Instructions, Paragraph 3.B., Work Instructions, WORK PACKAGE 5.

EFFECTIVITY All 737-100/200/300/400/500 Airplanes divided in three groups. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.

COMPLIANCE Refer to Paragraph 1.E., Compliance.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 11 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of June 14, 2001. Please refer to Paragraph

2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION None. Refer to Paragraph 2.A., Material - Price and Availability.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 24, 2007 737-27A1278Revision 1: January 07, 2010 12 of 83 BOEING SERVICE BULLETIN 737-27A1278

ALERTALERT

Pages 13–24 of 83