TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '153f5b69205536487686deeb9d5e5fce0fc39f8d7d109065122158c4220e82a0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '153f5b69205536487686deeb9d5e5fce0fc39f8d7d109065122158c4220e82a0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 737 Service Bulletin ALERT Number: 737-53A1232 Original Issue: April 02, 2007 Revision 3: July 27, 2015 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chemically Milled Steps - Inspection, Repair and Preventive Modification Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2007 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 1 of 161
4.0
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 2 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
BLANK PAGE
Table of Contents
Revision Transmittal Sheet5
S u m m a r y7
1. PLANNING INFORMATION ........................................ 1 1 A . E f f e c t i v i t y ............................................... 1 1
1. Airplanes ............................................ 1 1 2 . S p a r e s A f f e c t e d ........................................ 1 5 B. Concurrent Requirements ...................................... 1 5 C. Reason ................................................ 1 5 D. Description .............................................. 1 6 E. Compliance .............................................. 1 7 F . A p p r o v a l ............................................... 2 2 G. Manpower .............................................. 2 3 H. Weight and Balance Changes .................................... 2 5 I. Electrical Load Data ......................................... 2 6 J . R e f e r e n c e s .............................................. 2 6
1. Existing Data: ......................................... 2 6
2. Data Supplied with this Service Bulletin: ........................... 2 6
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 6 K. Publications Affected ........................................ 2 7 L. Interchangeability and Intermixability of Parts ........................... 2 7 M. Software Accomplishment Summary ................................ 2 7
2. MATERIAL INFORMATION ........................................ 2 9 A. Material - Price and Availability ................................... 2 9 B. Industry Support Information .................................... 2 9 C. Parts Necessary for Each Airplane ................................. 2 9 1 . K i t s / P a r t s : ........................................... 2 9
2. Parts and Materials Supplied by the Operator: ........................ 2 9
3. Parts Modified and Reidentified: ............................... 3 3
4. Parts Removed and Not Replaced: .............................. 3 3 D. Parts Necessary to Change Spares ................................. 3 4 E. Special Tooling - Price and Availability ............................... 3 4 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 4
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 5 A. GENERAL INFORMATION ..................................... 3 5 B. WORK INSTRUCTIONS ....................................... 3 6 FIGURE 1: CHEM-MILLED STEP - INSPECTION [Group 1] ....................... 4 3 FIGURE 2: CHEM-MILLED STEP - INSPECTION [Group 2] ....................... 4 7 FIGURE 3: CHEM-MILLED STEP - INSPECTION [Group 3] ....................... 5 1 FIGURE 4: CHEM-MILLED STEP - INSPECTION [Group 4] ....................... 5 5 FIGURE 5: CHEM-MILLED STEP - INSPECTION [Group 5] ....................... 5 9 FIGURE 6: CHEM-MILLED STEP - INSPECTION [Group 6] ....................... 6 3 FIGURE 7: CHEM-MILLED STEP - TYPICAL PERMANENT REPAIR .................. 6 8 FIGURE 8: CHEM-MILLED STEP - TYPICAL TIME LIMITED REPAIR ................. 7 8 FIGURE 9: CHEM-MILLED STEP - TYPICAL PERMANENT REPAIR (TIME LIMITED REPAIR REPLACEMENT) ........................................ 8 8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 3 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
FIGURE 10: CHEM-MILLED STEP - REPAIR - SUPPLEMENTAL INSPECTIONS ........... 1 0 0 FIGURE 11: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 1] ..... 1 0 3 FIGURE 12: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 2] ..... 1 1 2 FIGURE 13: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 3] ..... 1 2 1 FIGURE 14: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 4] ..... 1 3 0 FIGURE 15: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 5] ..... 1 3 9 FIGURE 16: CHEM-MILLED STEP - TYPICAL PREVENTATIVE MODIFICATION [Group 6] ..... 1 4 8 FIGURE 17: PREVENTATIVE MODIFICATION - POST MODIFICATION INSPECTION OF OUTER F A S T E N E R H O L E S..................................... 1 5 7 FIGURE 18: PREVENTATIVE MODIFICATION - POST MODIFICATION INSPECTION AT CHEM-MILLED S T E P ............................................. 1 5 9 APPENDIX A: AIRPLANES WITH PREVENTATIVE MODIFICATIONS INSTALLED AFTER 30,000 TOTAL F L I G H T C Y C L E S . ....................................... 1 6 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 4 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
Commercial Airplanes 737 Service Bulletin ALERT Revision Transmittal SheetNumber: 737-53A1232Original Issue: April 02, 2007 Revision 3: July 27, 2015 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chemically Milled Steps - Inspection, Repair and Preventive Modification This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2008-12-04 is related to this service bulletin.
Effects of this Issue on airplanes on which the Original Issue, Revision 1, or Revision 2 was previously done:
ActionConditionGroup Do repeat inspections at the times specified in Paragraph 1.E., Compliance, and contact The Boeing Company for work instructions before 50,000 total flight cycles and do the work.
Airplanes with preventative modifications that were installed after 30,000 total flight cycles in accordance with the Original Issue, Revision 1, or Revision 2 of this service bulletin.
1, 2, 3, 4, 5, 6
REASON FOR REVISION This revision is sent to remove the option to install the preventative modification after 30,000 total flight cycles.
These sections were changed:
1. In Summary - Background, updated information.
2. In Summary - Action, updated information.
3. In Paragraph 1.C., Reason, updated information.
4. In Paragraph 1.D., Description, added compliance information related to this revision.
5. In Paragraph 1.E., Compliance, updated compliance tables.
6. In Paragraph 1.F., Approval, updated Alternative Method of Compliance (AMOC) statement.
7. In Paragraph 1.K., Publications Affected, added information.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 5 of 161
8. In Paragraph 3.A., General Information, updated information.
9. In Paragraph 3.B., Work Instructions, updated information.
10. Added Appendix A.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY April 02, 2007Original Issue:
May 18, 2012Revision 1:
July 26, 2013Revision 2:
July 27, 2015Revision 3:
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 6 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
Commercial Airplanes 737 Service Bulletin ALERT SummaryNumber: 737-53A1232Original Issue: April 02, 2007 Revision 3: July 27, 2015 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chemically Milled Steps - Inspection, Repair and Preventive Modification
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
CONCURRENT REQUIREMENTS None.
BACKGROUND During a fatigue test of a 737-800 fuselage, cracks were found in the upper skin panel at the chemically milled step above the lap joint at Stringer-4 and Stringer-10 on both the left and right sides of the airplane. A total of 56 cracks were found in Section 43 and Section 46 with the first being found after 130,000 test cycles. Metallurgical lab analysis indicates that the cracks originated after approximately 80,000 test cycles and took between 30,000 and 46,500 cycles to propagate from initiation until they broke through the thickness of the skin. The cracking at the chemically milled step is caused by fatigue stresses generated by secondary bending in the lap splice. If cracks were left undetected over a long period of time, further testing has shown that the crack tips can continue to turn and grow to the point where the skin flaps open causing a rapid decompression event.
Cracking could develop at S-4 and S-10 in Sections 43 and 46 on all affected models. On 737-600 and -700 airplanes only, cracking could also develop at S-4 in Section 44. On 737-700C airplanes only, cracking could also develop at the S-7L lap splice in Section 42. The S-10 splice in Section 44 has a different configuration that did not exhibit cracking during the fatigue test. Inspection of the area will ensure the structural integrity of the fuselage and installation of the preventative modification before 30,000 total flight cycles will stop cracks from occurring from normal pressurization cycles before the airplane reaches its Limit of Validity (LOV).
The fuselage skin panels have been determined to be structure that is susceptible to Widespread Fatigue Damage (WFD).
Boeing Service Related Problems (SRP) 737NG-53-0152 and 737NG-SRP-53-0472 are related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 7 of 161
ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph
1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsNoKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Get access to the exterior fuselage skin around S-4 and S-10 at Sections 43 and 46 on the left and right sides of the airplane on all affected models. For 737-600 and -700 airplanes only, get access to the exterior fuselage skin around S-4 at Section 44 on the left and right sides of the airplane. On 737-700C airplanes only, get access to the external fuselage skin around S-7L at Section 42. Do an external detailed inspection and an external Non Destructive Inspection (NDI) for cracking in the fuselage skin along the chemically milled step above the upper row of the lap splice. The NDI methods that can be used are Medium Frequency Eddy Current (MFEC), Magneto Optical Imaging (MOI), C-Scan or Ultrasonic Phased Array (UTPA). If any crack is found, cut out damaged area of skin and repair as necessary. If no crack is found, install the preventative modification before 30,000 total flight cycles or do the repeat inspections. If any crack is found during a repeat inspection of a permanent repair or preventative modification, repair before further flight.
EFFECTIVITY 737-600, -700, -700C, -800 and -900 series Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2008-12-04 is related to this service bulletin.
The effective date of AD 2008-12-04 is July 16, 2008.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection, modification and repair procedures given in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 8 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
MANPOWER Elapsed HoursTotal Task HoursAirplanes
5.511Group 1 and 3
6.513Group 2
12.525Group 4
7.515Group 5
5.2510.5Group 6 NOTE: Additional time will be required for the installation of repairs and modifications or to do post modification inspections.
MATERIAL INFORMATION Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 9 of 161 BOEING SERVICE BULLETIN 737-53A1232
ALERTALERT
BOEING SERVICE BULLETIN 737-53A1232
ALERT ALERT
INSPECT SKIN FOR CRACKS AT THE
CHEMICALLY MILLED STEP, AT STRINGERS 4 AND 10, LEFT AND RIGHT BETWEEN STA 360 AND STA 887. DO
THE REPAIR OR MODIFICATION AS NECESSARY.
(LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE) (737-700 SHOWN, OTHER MODELS SIMILAR)
FRAME TYPICAL FRAME
UPPER C/L CRACK C/L SKIN S-4 S-10 (TYPICAL)
- c/L LOWER SKIN • INSPECTION AREA TYPICAL INSPECTION AREA 483575 Original Issue: April 02, 2007 Revision 3: July 27, 2015 PROPRIETARY - Copyright @ Unpublished Export Controlled ECCN: 9E991 - BOEING Work - See page 1 for details. 737-53A1232 10 of 161
Commercial Airplanes 737 Service Bulletin ALERT Number: 737-53A1232 Original Issue: April 02, 2007 Revision 3: July 27, 2015 ATA System: 5331 SUBJECT: FUSELAGE - Skin - Chemically Milled Steps - Inspection, Repair and Preventive Modification
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
1. PLANNING INFORMATION A. Effectivity
1. Airplanes Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP 737-600 airplanes from line number 1 thru 871.-1 737-700 airplanes from line number 1 thru 871.-2 737-700 airplanes with increased gross weight from line number 1 thru 871.
-3 737-800 airplanes from line number 1 thru 871.-4 737-900 airplanes from line number 1 thru 871.-5 737-700C airplanes from line number 1 thru 871.-6 Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 11 of 161
GroupVariable Number 2YA001 - YA099 2YA201 - YA210 2YA231 - YA242 2YA251 - YA254 2YA271 - YA272 2YA291 2YA301 - YA302 2YA311 - YA314 2YA321 - YA323 2YA336 - YA338 2YA501 - YA536 2YA541 - YA550 2YA571 - YA578 2YA601 - YA612 2YA621 - YA622 2YA626 - YA629 2YA681 - YA687 2YA701 - YA706 2YA721 - YA722 2YA731 - YA734 2YA751 - YA756 2YA801 - YA803 2YA811 - YA814 2YA831 - YA834 2YA841 - YA856 2YA881 - YA882 2YA891 - YA892 2YA961 - YA966 2YB001 - YB006 2YB101 - YB103 2YB151 - YB153 2YB161 - YB162 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 02, 2007 737-53A1232Revision 3: July 27, 2015 12 of 161 BOEING SERVICE BULLETIN 737-53A1232