Copy · SB 737-53A1267_Rev_01 S · 102 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9188; AD 2017-12-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '857859d86e93305b791e2e75e25f4fb26cc4e47d6eae5c158c9f4d527c974638'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin ALERT Number: 737-53A1267 Original Issue: November 28, 2006 Revision 1: March 08, 2016 ATA System: 5331 5311 SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2006 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 1 of 102

3.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 2 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

S u m m a r y9

1. PLANNING INFORMATION ........................................ 1 3 A . E f f e c t i v i t y ............................................... 1 3

1. Airplanes ............................................ 1 3 2 . S p a r e s A f f e c t e d ........................................ 2 3 B. Concurrent Requirements ...................................... 2 3 C. Reason ................................................ 2 4 D. Description .............................................. 2 4 E. Compliance .............................................. 2 5 F . A p p r o v a l ............................................... 3 4 G. Manpower .............................................. 3 5 H. Weight and Balance Changes .................................... 3 6 I. Electrical Load Data ......................................... 3 6 J . R e f e r e n c e s .............................................. 3 6

1. Existing Data: ......................................... 3 6

2. Data Supplied with this Service Bulletin: ........................... 3 7

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 7 K. Publications Affected ........................................ 3 8 L. Interchangeability and Intermixability of Parts ........................... 3 8 M. Software Accomplishment Summary ................................ 3 8

2. MATERIAL INFORMATION ........................................ 3 9 A. Material - Price and Availability ................................... 3 9 B. Industry Support Information .................................... 3 9 C. Parts Necessary for Each Airplane ................................. 3 9 1 . K i t s / P a r t s ............................................ 3 9

2. Parts and Materials Supplied by the Operator ........................ 3 9

3. Parts Modified and Reidentified ................................ 3 9

4. Parts Removed and Not Replaced .............................. 3 9 D. Parts Necessary to Change Spares ................................. 3 9 E. Special Tooling - Price and Availability ............................... 3 9 F. Special Tooling Necessary to do this Service Bulletin ....................... 4 0

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 1 A. GENERAL INFORMATION ..................................... 4 1 B. WORK INSTRUCTIONS ....................................... 4 3 FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT FASTENER COLUMNS - EXTERNAL SKIN INSPECTION [Group 1, Configuration 1] . . 49 FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT FASTENER COLUMNS - EXTERNAL SKIN INSPECTION [Group 1, Configuration 1] . . 54 F I G U R E 3 : T H I S F I G U R E I S D E L E T E D . .................................. 5 8 F I G U R E 4 : T H I S F I G U R E I S D E L E T E D . .................................. 5 9 F I G U R E 5 : T H I S F I G U R E I S D E L E T E D . .................................. 6 0 F I G U R E 6 : T H I S F I G U R E I S D E L E T E D . .................................. 6 1 FIGURE 7: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT FASTENER COLUMNS - EXTERNAL COUNTERSUNK RIVET INSPECTIONS [Group 1] . 62 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 3 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

FIGURE 8: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT FASTENER COLUMNS - EXTERNAL COUNTERSUNK RIVET INSPECTIONS [Group 1] . 67 FIGURE 9: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD FASTENER COLUMN - EXTERNAL POST PREVENTIVE MODIFICATION SKIN INSPECTION [Group 1, Configuration 2] ......................................... 7 1 FIGURE 10: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - AFT FASTENER COLUMN - EXTERNAL SKIN INSPECTION [Group 1, Configuration 2] .......... 7 6 FIGURE 11: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD FASTENER COLUMN - EXTERNAL POST PREVENTIVE MODIFICATION SKIN INSPECTION [Group 1, Configuration 2] ......................................... 8 1 FIGURE 12: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - AFT FASTENER COLUMN - EXTERNAL SKIN INSPECTION [Group 1, Configuration 2] .......... 8 5 APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: EXTERNAL SKIN INSPECTION - LEFT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE [Group 1, Configuration 1] ......................................... 8 9 APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: EXTERNAL SKIN INSPECTION - RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE [Group 1, Configuration 1] ......................................... 9 1 APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 3: EXTERNAL COUNTERSINK RIVET INSPECTION - LEFT AND RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE [Group 1] ........................ 9 3 APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 4: EXTERNAL POST PREVENTIVE MODIFICATION INSPECTIONS - SKIN - LEFT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - FORWARD FASTENER COLUMN [Group 1, Configuration 2 ] ................................................ 9 5 APPENDIX E: L OGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 5: EXTERNAL INSPECTIONS

- SKIN - LEFT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - AFT FASTENER COLUMN [Group 1, Configuration 2] ............................. 9 7 APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 6: EXTERNAL POST PREVENTIVE MODIFICATION INSPECTIONS - SKIN - RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - FORWARD FASTENER COLUMN [Group 1, Configuration 2 ] ................................................ 9 9 APPENDIX G: L OGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 7: EXTERNAL INSPECTIONS

- SKIN - RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - AFT FASTENER COLUMN [Group 1, Configuration 2] ............................. 1 0 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 4 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

Commercial Airplanes 737 Service Bulletin ALERT Revision Transmittal SheetNumber: 737-53A1267Original Issue: November 28, 2006 Revision 1: March 08, 2016 ATA System: 5331 5311 SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2007-26-04 is related to this service bulletin.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to this service bulletin (SB). The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Effects of this Revision on airplanes on which Original Issue was previously done:

ActionConditionGroup Do a detailed inspection and a High Frequency Eddy Current (HFEC) inspection of the fuselage skin, on the left and right sides of the airplane, for any crack common to the two fastener columns forward of STA 259.5 between S-19 and S-24.

Areas of the STA 259.5 circumferential butt splice that have not had the preventive modification installed in accordance with SB 737-53-1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4. (a) Group 1, Configuration 1 Do a one-time external detailed inspection for any crack or deformed countersunk rivet heads on the two fastener columns forward of STA

259.5 between S-19 and S-24, on both left and right sides of the airplane.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 5 of 102

ActionConditionGroup Do post preventive modification detailed and High Frequency Eddy Current (HFEC) inspections for any crack in the fuselage skin of the forward skin panel, on both left and right sides of the airplane on the forward fastener column forward of STA 259.5 between S-19 and S-24.

Areas of the STA 259.5 circumferential butt splice that have had the preventive modification installed in accordance with SB 737-53-1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4. (a) Group 1, Configuration 2 Do a detailed inspection and a High Frequency Eddy Current (HFEC) inspection the fuselage skin of the forward skin panel for any crack, on both left and right sides of the airplane on the aft fastener column forward of STA 259.5 between S-19 and S-24.

Do a one-time external detailed inspection for cracked or deformed countersunk rivet heads on the two fastener columns forward of STA

259.5 between S-19 and S-24, on both left and right sides of the airplane.

None.All AirplanesGroup 2

(a) 'preventive modification' refers to the fastener modification accomplished in accordance with SB 737-53- 1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4 when countersunk production fasteners were replaced by protruding head fasteners on the forward fastener column forward of STA 259.5 between S-19 and S-24 on the left or right side of the airplane.

REASON FOR REVISION This revision is sent to provide updated and new inspection requirements, changed compliance time requirements, updated repair instructions, and changed airplane groupings. The SB has been elevated to an alert status in this revision.

In this revision:

– A new inspection of the skin at the aft fastener column, for the left and right sides of the aircraft, has been added.

– Post preventive modification inspections are required on preventive modifications done in accordance with SB 737-53-1267 Original Issue or 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4.

– A new inspection procedure is recommended at locations without a preventive modification installed.

– A new trim out repair, for the left hand side only, has been added.

– A mandatory modification as was given in SB 737-53-1267 Original Issue is no longer required.

– A new one-time detailed inspection of production countersunk rivets is required.

– Airplanes line numbers 1-291 are moved from Group 1 to new Group 2.

These sections were changed:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 6 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

1. In Summary - Background, updated information and added planning data table.

2. In Summary - Action, updated information.

3. In Summary, revised the illustration.

4. In Paragraph 1.A.1, Airplanes, Line numbers 1-291 are moved from Group 1 to new Group 2. Group 1, Configuration 1 and 2 descriptions are changed and Group 1, configuration 3 is deleted.

5. In Paragraph 1.C., Reason, updated information.

6. In Paragraph 1.D., Description, updated information.

7. In Paragraph 1.E., Compliance, updated compliance table information and added AD statement(s).

8. In Paragraph 1.F., Approval, updated AMOC statement.

9. In Paragraph 1.G., Manpower, included new tables for skin inspections and repairs.

10. In Paragraph 1.I., Electrical Load Data, added information.

11. In Paragraph 1.J., References, updated list of references and added drawings supplied and used in the preparation of this service bulletin information.

12. In Paragraph 1.K., Publications Affected, updated and added information.

13. Added Paragraph 1.M., Software Accomplishment Summary.

14. In Paragraph 2.C., Parts Necessary for Each Airplane, updated information.

15. In Paragraph 3.B., Work Instructions, updated instructions for inspections and repairs.

16. Figure 1 and Figure 2, changed to show new and additional inspection requirements, revised applicability.

17. Figure 7 and Figure 8, added for fastener head inspections.

18. Figure 9 through 12, added for post preventive modification inspections.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.

Pages with no vertical lines have no changes.

REVISION HISTORY November 28, 2006Original Issue:

March 08, 2016Revision 1:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 7 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 8 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

BLANK PAGE

Commercial Airplanes 737 Service Bulletin ALERT SummaryNumber: 737-53A1267Original Issue: November 28, 2006 Revision 1: March 08, 2016 ATA System: 5331 5311 SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair

THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to do inspections for any crack on the forward skin panel at the Station (STA) 259.5 circumferential butt splice between stringers 19 and 24 on the left and right side of the airplane. If the work given in this service bulletin is not accomplished, any crack in the forward skin panel could remain undetected. If multiple cracks occur, they can link up and create a larger fatigue crack that would result in a possible decompression and loss of structural integrity of the airplane.

Two operators have found cracks that have linked up at the forward column of fasteners in the forward skin panel at the circumferential butt splice between stringers 19L and 24L. One airplane had 69,350 total flight cycles and cracks linked up at 5 fastener holes. The second airplane had 68,323 total flight cycles and inspections in accordance with original issue of this SB found 23 cracks, with cracks linked up at 3 fastener holes. In addition, 5 fastener holes were cracked at the aft column of fasteners in the forward skin panel at the circumferential butt splice between stringers 19L and 24L. Additionally, there are 20 other crack findings on airplanes with between 42,308 and 70,202 total flight cycles. There is also one report of cracked and deformed rivet manufactured heads in the forward column of fasteners in combination with skin cracks at the same locations.

The countersunk fasteners in both the forward and aft column of fasteners in the forward skin panel create a knife-edge condition in skin panels on both the left and right sides of the airplane. A higher stress exists in the left panel as the left and right panel designs are different. Airplanes after line number 2565 have solid skins without attached fillers and the skin is thicker. Airplanes after line number 2565 are not affected by this service bulletin.

The forward skin panel at STA 259.5 circumferential butt splice between stringers 19L and 24L has been determined to be structure that is susceptible to Widespread Fatigue Damage (WFD).

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 9 of 102

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsNoKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator NoOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Group 1, Configuration 1:

Do a detailed inspection and a High Frequency Eddy Current (HFEC) surface inspection for any crack of the skin around the head of the production countersunk fasteners on the forward and aft fastener columns of the forward skin panel at the STA 259.5 circumferential butt splice, left and right side of airplane between stringers 19 and 24. If any crack is found, repair in accordance with the applicable structural repair manual sections given in this service bulletin. For the left side only, a trim out repair is available as an option. If no crack is found, repeat the inspections at the times specified in Paragraph 1.E., Compliance.

Group 1:

Do a one-time detailed inspection for rivet defects in production countersunk rivets, in both forward and aft fastener columns of the forward skin panel at the STA 259.5 circumferential butt splice, left and right sides of the airplane. A rivet defect is any cracked or misshapen rivet manufactured head that does not meet 737-100/200 SRM 51-30-02, 737-300 SRM 51-40-02, 737-400 SRM 51-40-02 or 737-500 SRM 51-40-02 installation requirements. If no rivet defect is found, no further action is required. If any rivet defect is found, contact The Boeing Company for repair instructions and do the repair.

Group 1, Configuration 2:

Do a detailed inspection and a HFEC surface inspection for any crack of the skin around the head of the protruding head fasteners of the forward column and the production countersunk fasteners of the aft column of the forward skin panel at the STA 259.5 circumferential butt splice, left and right sides of the aircraft between stringers 19 and 24, that have the service bulletin 737-53-1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4 preventive modification installed. If no crack is found, repeat the inspections at the times specified in Paragraph 1.E., Compliance. If any crack is found, contact The Boeing Company for repair instructions and do the repair.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 10 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

Group 2:

Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA jurisdiction.

As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 2 (line numbers 1-291) have accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.

EFFECTIVITY 737-100/-200/-200C/-300/-400/-500 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2007-26-04 is related to this service bulletin.

The effective date of AD 2007-26-04 is January 22, 2008.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service bulletin.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION None.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 28, 2006 737-53A1267Revision 1: March 08, 2016 11 of 102 BOEING SERVICE BULLETIN 737-53A1267

ALERTALERT

Page 12OCROpen in PDF

BOEING SERVICE BULLETIN 737-53A1267

ALERT ALERT STA 259.5

CREASE LINE _ S-17

- S-19 SEE -S-24

INSPECT SKIN OF THE FORWARD SKIN PANEL FOR ANY CRACK AROUND THE HEADS OF THE

FASTENERS ON THE FORWARD AND AFT FASTENER COLUMNS OF THE CIRCUMFERENTIAL BUTT SPLICE AT STA 259.5 BETWEEN STRINGERS 19 AND 24 ON THE LEFT AND RIGHT SIDES OF THE AIRPLANE. DO A ONE TIME DETAILED INSPECTION FOR PRODUCTION COUNTERSINK RIVET DEFECTS IN BOTH FORWARD AND AFT COLUMNS OF THE CIRCUMFERENTIAL BUTT SPLICE. IF ANY CRACK FOUND, DO THE REPAIR AS SPECIFIED IN THIS BULLETIN.

STA 259.50 BUTT SPLICE UPPER AFT

UPPER FORWARD SKIN PANEL

SKIN PANEL

- STRINGER 19

CIRCUMFERENTIAL

- LAP JOINT

BUTT SPLICE FORWARD

FASTENER ROW

LAP JOINT

EXAMPLE CRACKS SPLICE STRAP 5-20 (REF) SPLICE STRAP

EXAMPLE CRACKS

LOWER FORWARD SKIN PANEL - LOWER AFT

SKIN PANEL

FORWARD FASTENER COLUMN EDGE OF

SKIN PANEL

AFT FASTENER COLUMN INSPECTION AREA D38143 Original Issue: November 28, 2006 Revision 1: March 08, 2016 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished 737-53A1267 Work - See page 1 for details. 12 of 102

Pages 13–24 of 102