Copy · 737-53A1382-00--RB - BOEING · 227 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0670, the docket of AD 2020-02-16. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 169–180
Page 181Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14L, STA 727A TO STA 787 SKIN - LAP SPLICEInspect1

(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.

Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean up hole for open hole HFEC inspection.

FIGURE 25: SECTION 46 - SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH

FREQUENCY EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 181 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 182OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 10.

STA 1016 STA 727

STA STA 908 787 STA 1016

- S-1 0000090000000

- S-14R FRAME FWD

UPPER SKIN

LOWER SKIN

TYPICAL CRACK

STRINGER-

TYPICAL SKIN LAP SPLICE INSPECTION AREA 2850977 FIGURE 26: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 182 of 227

Page 183Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14R, STA 787 TO STA 908 SKIN - LAP SPLICEInspect1

(a) Do the external Dual Frequency Eddy Curent Inspection of the lower skin along the lap splice lower fastener row for any crack, in accordance with 737 NDT Manual Part 6, 53-30-00 Procedure 9.

Do not do the contingent open hole inspection specified in 737 NDT Manual Part 6, 53-30-00 Procedure

9.

FIGURE 26: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY

EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 183 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 184OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 4-5.

STA 1016 STA 727

STA STA 787 908

STA STA 1016 S-1 0000009000000 -S-14L FRAME

•

UPPER SKIN *LOWER SKIN

TYPICAL CRACK

STRINGER

TYPICAL SKIN LAP SPLICE /A INSPECTION AREA 2851558 FIGURE 27: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 184 of 227

Page 185Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14L, STA 787 TO STA 908 SKIN - LAP SPLICEInspect1

(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.

Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean up hole for open hole HFEC inspection.

FIGURE 27: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 185 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 186OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 11, Configuration 1.

STA 727

STA STA 847 727A STA 1016 000 0000000000000

- S-14R FRAME

UPPER SKIN *LOWER SKIN

TYPICAL CRACK STRINGER•

TYPICAL SKIN LAP SPLICE INSPECTION AREA 2850784 FIGURE 28: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 186 of 227

Page 187Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14R, STA 727A TO STA 847 SKIN - LAP SPLICEInspect1

(a) Do the external Dual Frequency Eddy Curent Inspection of the lower skin along the lap splice lower fastener row for any crack, in accordance with 737 NDT Manual Part 6, 53-30-00 Procedure 9.

Do not do the contingent open hole inspection specified in 737 NDT Manual Part 6, 53-30-00 Procedure

9.

FIGURE 28: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY

EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 187 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 188OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 6, Configuration 2-3.

STA 1016 STA 727 STA 727G STA 1016 S-1

- S-14L FWD FRAME

UPPER SKIN *LOWER SKIN

TYPICAL CRACK

STRINGER

TYPICAL SKIN LAP SPLICE /A INSPECTION AREA 2851559 FIGURE 29: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 188 of 227

Page 189Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14L, STA 727A TO STA 727G SKIN - LAP SPLICEInspect1

(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.

Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean up hole for open hole HFEC inspection.

FIGURE 29: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 189 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 190OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 1, Configuration 1.

STA 1016 STA 727 STA STA 827 1016 S-1 S-14R - 000000000 FRAME FWD

UPPER SKIN

LOWER SKIN

TYPICAL CRACK STRINGER•

TYPICAL SKIN LAP SPLICE / INSPECTION AREA 2851566 FIGURE 30: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 190 of 227

Page 191Open in PDF

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)1S-14R, STA 727 TO STA 827 SKIN - LAP SPLICEInspect1

(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.

Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean up hole for open hole HFEC inspection.

FIGURE 30: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 191 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Page 192OCROpen in PDF

REQUIREMENTS BULLETIN 737-53A1382

ALERT ALERT This Figure applies only to: Group 6, Configuration 1.

STA 1016 STA 727 STA 1016 S-1 0000 - S-14L WD FRAME

UPPER SKIN *LOWER SKIN

TYPICAL CRACK

STRINGER

TYPICAL SKIN LAP SPLICE /A INSPECTION AREA 2851560 FIGURE 31: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY

EDDY CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 192 of 227

Pages 193–204 of 227