TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd4e2841c96bb8fbabfcc20a490a23e9e6b7c57863acd6f01dc56592dcde1975d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd4e2841c96bb8fbabfcc20a490a23e9e6b7c57863acd6f01dc56592dcde1975d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 747 Service Bulletin ALERT Number: 747-25A3581 Original Issue: September 23, 2010 Revision 2: September 11, 2012 ATA System: 2500 SUBJECT: EQUIPMENT/FURNISHINGS - Cargo and Accessory Compartments - M826 Cardfile Drip Shield Change
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
1. PLANNING INFORMATION A. Effectivity
1. Airplanes Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent production airplanes. Refer to PRR 85901-100RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP 747-400 that did not get hardware equivalent to SB 747-25A3526 during conversion to BCF configuration.
-1 747-400 that did get hardware equivalent to SB 747-25A3526 during conversion to BCF configuration.
-2 Airplane Models:
747-400 GroupVariable Number 2RM128 2RT021 - RT022 2RT031 - RT033 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 13 of 63
GroupVariable Number 2RT061 1RT071 - RT072 1RT075 2RT161 2RT164 1RT456 2RT461 1RT501 2RT506 1RT507 - RT510 1RT513 1RT516 1RT518 2RT519 1RT520 1RT524 2RT526 1RT528 2RT530 1RT572 - RT574 2RT575 - RT579 2RT642 1RT655 - RT657 1RT751 2RT752 1RT781 - RT782 2RT837 2RT967
2. Spares Affected Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for the recommended use.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 14 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
B. Concurrent Requirements The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
Group 1:
DescriptionService BulletinCompany
(a) (b) Drip shield Modification747-25A3526, Revision 1Boeing
(a) Steps 1-5 of Figure 2 in service bulletin 747-25A3526 R1 are NOT required if work is being accomplished concurrent with this service bulletin.
(b) The portion of "More Data" in step 8 of Figure 3 in service bulletin 747-25A3526 R1 which says "Attach drain tube and strap above bead on the spud" is also NOT required.
Group 2:
None C. Reason This service bulletin will mitigate water from exiting over the edge of the existing drip shield and contaminating electrical components in the M826 cardfile below. If this service bulletin is not incorporated, electrical components in the M826 cardfile can malfunction due to water contamination which could result in an electrical short and potential loss of several functions essential for safe flight.
An Operator reported finding evidence of water damage to Diode Fire Card 285U0072-1 in the M826 Automatic Fire Overheat Logic Test System (AFOLTS) cardfile following a false FWD CARGO FIRE message which resulted in an Air Turn Back (ATB). Measurements showed the drip shield sloped away from the two drains added by SB 747-25A3370 (-400F) and SB 747-25A3526 (-400 Boeing Converted Freighter) and mandated by Airworthiness Directive (AD). Boeing's subsequent investigation found other reports of water damage to circuit cards in M826 affecting several operators.
This service bulletin replaces the existing drip shield with a new drip shield, installs two new drip shield deflectors between the new drip shield and the two adjacent bulkheads, and relocates wire bundles that interfere with these installations.
Boeing Service Related Problem (SRP) 747-SRP-25-0282 is related to this service bulletin.
Revision 1 was send to make changes to the service bulletin to correct an interference issue found during parts mock-up for the 747-8.
Revision 2 is sent to make changes to the service bulletin to address possible interference issues, which clarifies wire routing, allows for trimming of parts and adds parts to the top kit. Also to add 1 airplane to service bulletin effectivity.
D. Description Do the following items:
1. Remove existing drip shield
2. Relocate wire bundle routing.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 15 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
3. Install new drip shield's brackets
4. Install new drip shield
5. Install new drip shield deflectors
6. Install new insulation blankets Revision 2 - More work is necessary on the airplane(s) changed in accordance with revision 1 of this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones ZoneModel 115747-400 E. Compliance The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 24 months after the revision 2 issue date of this service bulletin.
F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.
G. Manpower The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:
Time to adjust to the workplace Time to schedule the work Time to inspect the work Time to cure the materials Time to make the parts Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 16 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
2.752.751Figure 1
2.254.502Figure 2
1.501.501Figure 3
3.256.502Figure 4
2.254.502Figure 5
1.251.251Figure 6
1.001.001Figure 7
0.250.251Test
14.7522.50TOTAL FOR EACH AIRPLANE H. Weight and Balance Changes Change in Moment (Pound-Inches) Change in Weight (Pounds)Airplane +2717.0+7.3Group 1 +2717.0+7.3Group 2 I. Electrical Load Data Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 85901-100RS
b. Boeing Service Bulletin 747-25A3526
c. Boeing Service Related Problem (SRP) 747-SRP-25-0282
d. Service Bulletin Index D6-30300
e. Standard Overhaul Practices Manual (SOPM) 20-15-19, 20-43-03, 20-50-12
f. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19
g. 747-400 Aircraft Maintenance Manual (AMM) 25-52-04, 53-21-02 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 17 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
h. 747-400SF Structural Repair Manual (SRM) 51-20-01, Chapter 51
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number BLANKET ASSEMBLY INSULATION411U4403
DRIP SHIELD INSTL - CARD FILE - NOSE WHEEL WELL LH SIDE 828B4134 WIRE BUNDLE INSTALLATION - NOSE SECTION 41828B8101 These drawings were used to prepare this service bulletin. These drawings are not necessary to make the specified changes, and are not supplied with this service bulletin. These drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication 53-11747 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability information.
M. Software Accomplishment Summary Not affected.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 18 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
2. MATERIAL INFORMATION A. Material - Price and Availability Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane , as shown below. If there is a limit to the quantity of available , a supply sequence is given by Spares. More become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from the date Boeing gets the purchase order.
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION Unit Price thru 04/30/2012 ROLT (Calendar Days) QTYDateNameKit Number $8,844.0029318/2/2011TOP KIT - AFOLTS
DRIP SHIELD MODIFI- CATION 015U1884-1 The Kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price data is applicable. Prices are in United States dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65 Boeing Spares Department P.O. Box 3707 Seattle, Washington 98124-2207 USA B. Industry Support Information Boeing warranty remedies are available for 747 airplanes in warranty as of October 8, 2008 . For task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Commercial Airplanes Group - Warranties. The kit for airplanes in warranty as of that date will be supplied at no charge. Send a purchase order for the kit to Boeing Spares. Please refer to this service bulletin number and reference the airplane variable number in your purchase order.
C. Parts Necessary for Each Airplane
1. Kits/Parts To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 19 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the Operator, are necessary for each airplane.
Kit 015U1884 NotesExisting Part Number NameQTYNew Part Number -1
TOP KIT - AFOLTS
DRIP SHIELD RE-
PLACEMENT -015U1884-1 BRACKET ASSY1287U0072-53
INSULATION
BLANKET ASSEM- BLY 1411U4403-1001
DRIP SHIELD -
FWD BRACKET 1672U7102-1
DRIP SHIELD -
AFT BRACKET 1672U7102-2
DRIP SHIELD -
DEFLECTOR 1672U7102-6
WIRE BRACKET ASSY 2672U7102-8
DRIP SHIELD - STA 360 BRACK-
ET ASSY 1672U7102-9
DRIP SHIELD - STA 380 BRACK-
ET ASSY 1672U7102-10
DRIP SHIELD - ASSY 1672U7102-11
DRIP SHIELD -
DEFLECTOR PLATE 4672U7102-12
DRIP SHIELD -
DEFLECTOR PLATE 1672U7102-13
DRIP SHIELD -
DEFLECTOR 1672U7102-14 Rod, filler169B47961-5
HI-LOK PROT HEAD 2BACB30MY6K7
HI-LOK PROT HEAD 2BACB30MY6K8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 20 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
Kit 015U1884 NotesExisting Part Number NameQTYNew Part Number -1
(a)BOLT, PROTRUD- ING HD 2BACB30VN6K7
(a)BOLT, PROTRUD- ING HD 2BACB30VN6K8
(a)BOLT, PROTRUD-
ING HEAD 15BACB30VT6K3
(a)BOLT8BACB30VT6K4 HI-LOK1BACB30VT6K7 HI-LOK5BACB30VT8K6 BOLT3BACB30VT8K7
BOLT SHEAR LIGHT 2BACB30VT8K8 CLAMP, LOOP1BACC10DK12
(a)COLLAR4BACC30BK6
(a)COLLAR24BACC30BL6 COLLAR10BACC30BL8 COLLAR4BACC30M6
NUT, SPACER PLATE 1BACN10GH3A10 NUT2BACN10YR3CD
(a)RIVET9BACR15BA4AD6C
(a)RIVET, 100 DEG6BACR15BA5AD4C
(a)RIVET, 100 DEG6BACR15BA5AD5C
RIVET, UNIVER-
SAL HEAD 2BACR15BB4D5C
(a)RIVET22BACR15BB5AD6C RIVET2BACR15BB5D5C SCREW5BACS12GU3K30
(a)BOLT8BACS12HN3-9
(a)BOLT5BACS12HN3-10
(a)BOLT3BACS12HN3-11 BOLT1BACS12HN3-12 BOLT1BACS12HN3-20 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 21 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
Kit 015U1884 NotesExisting Part Number NameQTYNew Part Number -1
(a)RINGPOST, WIRE
HARNESS
MOUNTING SUP- PORT 16BACS31H1B
(a)RINGPOST, WIRE
HARNESS
MOUNTING SUP- PORT 30BACS31H2B STRAP2BACS38K1 STRAP1BACS38K3
(a)TIE STRAP100BACS38W1
(a)WASHER6NAS1149D0332J
(a)WASHER, FLAT16NAS1149D0363J
SPACERS FOR BOLTS 1NAS43DD3-18FC
SPACERS FOR BOLTS 1NAS43DD3-48FC
SPACERS FOR BOLTS 1NAS43DD3-50FC
(a)SPACER, SLEEVE3NAS43DD6-9FC
(a) There are more parts than are necessary.
(b) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer than indicated. Also, if any fasteners part numbers listed are not available or have been superseded, substitute fasteners may be supplied in kits.
2. Parts and Materials Supplied by the Operator NotesNameQTYPart Number / Specification
(a)SEALANT12 OZBMS 5-95
(a)ADHESIVE12 OZBMS 5-92
(a)CORROSION INHIBITING COM- POUND 8 OZBMS 3-27
(a)ALODINE SOLUTION8 OZALODINE 1200 or 1200S
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 22 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
3. Parts Modified and Reidentified None.
4. Parts Removed and Not Replaced None.
D. Parts Necessary to Change Spares None.
E. Special Tooling - Price and Availability None.
F. Special Tooling Necessary to do this Service Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 23 of 63 BOEING SERVICE BULLETIN 747-25A3581
ALERTALERT
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 23, 2010 747-25A3581Revision 2: September 11, 2012 24 of 63 BOEING SERVICE BULLETIN 747-25A3581