TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8595562ae66e8e703355dd98da5f4af72c33b96e13cc468a0948e987be8bd001' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8595562ae66e8e703355dd98da5f4af72c33b96e13cc468a0948e987be8bd001' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 747 Service Bulletin Number: 747-53A2784 Original Issue: August 27, 2009 Revision 1: September 14, 2011 ATA System: 5310 SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2009 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 1 of 237
5.0
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 2 of 237 BOEING SERVICE BULLETIN 747-53A2784
BLANK PAGE
Table of Contents
Revision Transmittal Sheet5
Summary9
1. PLANNING INFORMATION ........................................ 1 3 A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 1 4 B. Concurrent Requirements ...................................... 1 4 C. Reason ................................................ 1 5 D. Description .............................................. 1 5 E. Compliance .............................................. 1 6 F. Approval ............................................... 1 9 G. Manpower .............................................. 1 9 H. Weight and Balance Changes .................................... 2 0 I. Electrical Load Data ......................................... 2 0 J. References .............................................. 2 1
1. Existing Data .......................................... 2 1
2. Data supplied with this Service Bulletin ............................ 2 1
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 1 K. Publications Affected ........................................ 2 2 L. Interchangeability and Intermixability of Parts ........................... 2 2
2. MATERIAL INFORMATION ........................................ 2 3 A. Material - Price and Availability ................................... 2 3 B. Industry Support Information .................................... 2 3 C. Parts Necessary For Each Airplane ................................. 2 3
1. Kits/Parts ............................................ 2 3
2. Parts and Materials Supplied by the Operator ........................ 3 5
3. Parts Modified and Reidentified ................................ 3 5
4. Parts Removed and Not Replaced .............................. 3 6 D. Parts Necessary to Change Spares ................................. 3 6 E. Special Tooling - Price and Availability ............................... 3 6 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 7 A. GENERAL INFORMATION ..................................... 3 7 B. WORK INSTRUCTIONS ....................................... 3 8 FIGURE 1: STA 300 TO STA 340 CROWN - ACCESS .......................... 4 2 FIGURE 2: STA 320 CROWN FRAME - WEB THICKNESS MEASUREMENT ............. 4 5 FIGURE 3: STA 320 CROWN FRAME - INSPECTION .......................... 4 7 FIGURE 4: DELETED ............................................ 5 1 FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION ....................... 5 2 FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL ............... 5 7 FIGURE 7: STA 320 CROWN FRAME - STRAP, ANGLE, TEE, STIFFENER, CLIP AND BRACKET REMOVAL ........................................... 6 3 FIGURE 8: STA 320 CROWN FRAME - LOWER CHORD REMOVAL .................. 8 1 FIGURE 9: STA 320 TO STA 340 CROWN - LEFT SIDE INTERCOSTAL REMOVAL ......... 9 4 FIGURE 10: STA 320 TO STA 340 CROWN - RIGHT SIDE INTERCOSTAL REMOVAL ........ 1 0 0
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 3 of 237 BOEING SERVICE BULLETIN 747-53A2784
FIGURE 11: STA 320 CROWN FRAME - WEB REMOVAL ........................ 1 0 6 FIGURE 12: STA 320 CROWN FRAME - LOWER CHORD INSPECTION ............... 1 1 2 FIGURE 13: STA 320 CROWN FRAME - WEB INSTALLATION ..................... 1 1 7 FIGURE 14: STA 320 TO STA 340 CROWN - RIGHT SIDE INTERCOSTAL INSTALLATION ..... 1 2 5 FIGURE 15: STA 320 TO STA 340 CROWN - LEFT SIDE INTERCOSTAL INSTALLATION ...... 1 3 3 FIGURE 16: STA 320 CROWN FRAME - LOWER CHORD AND SPLICE INSTALLATION ...... 1 4 1 FIGURE 17: STA 320 CROWN FRAME - DRIP SHIELD BRACKET MODIFICATION OR FABRICATION ................................................. 1 5 5 FIGURE 18: STA 320 CROWN FRAME - STRAP, ANGLE, TEE STIFFENER, CLIP AND BRACKET INSTALLATION ........................................ 1 5 8 FIGURE 19: STA 320 TO STA 340 CROWN - INTERCOSTAL, TEE AND STRAP INSTALLATION . . 185 FIGURE 20: STA 300 TO STA 340 CROWN - ACCESS PANEL INSTALLATION ........... 1 9 8 FIGURE 21: STA 300 TO STA 340 CROWN - CLOSE ACCESS ..................... 2 0 5 FIGURE 22: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL .............. 2 0 8 FIGURE 23: STA 320 CROWN FRAME - POST WEB REPLACEMENT INSPECTIONS ........ 2 1 4 FIGURE 24: STA 300 TO STA 340 CROWN - ACCESS PANEL INSTALLATION ........... 2 1 7 FIGURE 25: STA 320 CROWN FRAME - UPPER CHORD AND SKIN FASTENER REMOVAL .... 2 2 3 FIGURE 26: STA 320 CROWN FRAME - UPPER CHORD AND SKIN FASTENER INSTALLATION . 227 APPENDIX A: 015U1848-1 TOP KIT - PARTS LIST AND FIGURE KITS ................. 2 3 2
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 4 of 237 BOEING SERVICE BULLETIN 747-53A2784
Commercial Airplanes 747 Service Bulletin Revision Transmittal SheetNumber: 747-53A2784Original Issue: August 27, 2009 Revision 1: September 14, 2011 ATA System: 5310 SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.
REASON FOR REVISION As a part of a service bulletin validation program, this inspection and change was completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue before the release of Revision 1 of this service bulletin. The inspection and change completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane RT437 has the configuration of a Group 1 airplane.
This revision is sent to incorporate all necessary additions and changes found as a result of the validation of this service bulletin:
1. Summary, Background: The condition for web replacement is corrected. Information is added for airplane RT437. New service history information is added
2. Summary, Action: Action is changed for airplanes with a repair doubler installed on the web. Buttock Line (BL) 0 intercostal inspection is removed.
3. Paragraph 1.C., Reason: The condition for web replacement is corrected. Information is added for airplane RT437. New service history information is added
4. Paragraph 1.D., Description: Description is changed for airplanes with a repair doubler installed on the web.
BL 0 intercostal inspection is removed.
5. Paragraph 1.E., Compliance: The conditions are changed in Table 1 for airplanes with a repair doubler installed on the web. BL 0 intercostal inspections are removed from Table 2 and Table 3. A footnote is added to Table 4.
6. Paragraph 1.G., Manpower: The manpower estimates are changed.
7. Paragraph 1.J., References, Existing Data: References are added.
8. Paragraph 1.K., Publications Affected: Affected publication is added.
9. Paragraph 2.A., Material - Price and Availability: Price and availability data for the new Top Kit and Supplemental kit is added.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 5 of 237
10. Paragraph 2.C., Parts Necessary For Each Airplane: A new Top Kit and a new Supplemental Kit are added.
Protective enamel is added to Parts and Materials Supplied by the Operator.
11. Paragraph 3.A., General Information: Note 4 edge margin tolerance is removed. Note 13 edge margin requirements are changed. Note 14 is revised to allow 1/32 oversize. An instruction is added to install parts wet with BMS 5-95 sealant.
12. Paragraph 3.B., Work Instructions:
– The actions are changed in PART 2 for airplanes with a repair doubler installed on the web.
– BL 0 intercostal inspections are removed.
– Instructions are added to PART 5 for the removal and installation of fasteners common to the upper chord and the skin as necessary for access.
– Instructions are added to PART 5 to chamfer/trim and inspect the sill chord in FIGURE 8 and to contact Boeing if cracking is found.
– Instruction to apply chemical conversion coating, primer and protective enamel is added to PART 5.
13. FIGURE 4: This figure is deleted.
14. FIGURES 6 and 20: Instructions for removing and installing cover plates forward of STA 300 are deleted.
15. FIGURE 7: Instructions for trapped bolt are added. Instructions to remove / keep angles 141U8008-7 and 141U8008-8 are added.
16. FIGURE 8: Instructions to chamfer or trim the sill chord as necessary are added. Instructions to do an HFEC inspection of the chamfer/trim surface are added.
17. FIGURES 9 and 10: Instructions for removing intercostals between STA 300 and STA 320 are removed.
Instructions for removing LBL 15.0 and RBL 15.0 intercostals between STA 320 and STA 340 are changed.
18. FIGURE 12: Instructions are added to inspect the left and right halves of the lower chord around fasteners common to the straps.
19. FIGURE 13: Steps are added to align the lower chord and the edge margin requirements are changed for the web. A caution is added for drilling the new web.
20. FIGURES 14 and 15: Instructions for installing intercostals between STA 300 and STA 320 are removed.
Fasteners for installing LBL 15.0 and RBL 15.0 intercostals between STA 320 and STA 340 are changed.
21. FIGURE 16: Instructions to align the web, lower chord and lower chord splice are added. An optional nut and washer are added at 14 fastener locations common to the splice.
22. FIGURE 18: Instructions for the installation of angles 141U8008-7 and 141U8008-8 are added. An optional fastener is added at two locations. Caution statements are added for some fastener locations common to the 141U8008U19 and 141U8008U20 tees. The minimum edge margin is changed for some fastener locations common to the 141U8008U19 and 141U8008U20 tees. Instructions to cut the 141U8008U19 and 141U8008U20 tees are changed. Instructions to chamfer 141U0058-13 clip and 141U8008-2 angle are added. Fastener hole diameters are changed for fasteners common BL 0 intercostals.
23. FIGURE 19: Instructions are added to drill and cut the tees and to cut the intercostals. The part numbers for shims 5, 6, 11 and 12 are corrected.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 6 of 237 BOEING SERVICE BULLETIN 747-53A2784
24. FIGURE 20: The minimum edge margin is changed for two fastener locations common to the lower chord.
25. FIGURES 25 and 26: These figures are added to remove and install fasteners common to the upper chord and skin as necessary for access.
26. Appendix A: This appendix is added to give part and figure kit information for the 015U1848-1 top kit.
The data given in Information Notice 747-53A2784 IN 01 is included in this revision.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY August 27, 2009Original Issue:
September 14, 2011Revision 1:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 7 of 237 BOEING SERVICE BULLETIN 747-53A2784
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 8 of 237 BOEING SERVICE BULLETIN 747-53A2784
BLANK PAGE
Commercial Airplanes 747 Service Bulletin SummaryNumber: 747-53A2784Original Issue: August 27, 2009 Revision 1: September 14, 2011 ATA System: 5310 SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement
CONCURRENT REQUIREMENTS None.
BACKGROUND Boeing has determined that the web of the Body Station (STA) 320 crown frame on some 747-400 airplanes may not be the correct design thickness and the frame assembly could be missing fasteners. If the web is not the correct thickness or if the frame assembly is missing fasteners, cracks could exist. If crown frame cracks exist and are not found, the cracks could grow and lead to complete fracture of the STA 320 crown frame assembly. Complete fracture of the crown frame assembly may result in damage to the skin and in-flight decompression of the airplane.
During production an error was made on early 747-400's affecting the thickness of the STA 320 crown frame web, which is located between Left Buttock Line (LBL) 25 and Right Buttock Line (RBL) 25, Water Line (WL)
380. Records indicate that the drawing was revised in September 1988 to increase the STA 320 crown frame web thickness to 0.14 inch for 747-400 airplanes, however this change was not implemented in production until September 1992. The result of this error was the continued installation of a 0.08 inch thick web instead of a 0.14 inch thick web. If the 0.08 inch thick web is not replaced it could crack due to fatigue. Boeing has also had a report of missing fasteners common to the web.
Initially, two operators informed Boeing of a crown frame web crack at LBL 15.0, STA 320. The cracks were both 0.65 inches in length and were reported after 9,354 flight cycles on one airplane and 12,851 flight cycles on the other airplane. Further investigation revealed that in both cases the web was made from 0.08 inch thick material and did not conform to production drawings. Also, an operator has reported missing fasteners from locations common to the frame web and lower chord on the first delivered 747-400 after 10,317 flight cycles.
This airplane also had a web made from 0.08 inch thick material and did not conform to production drawings.
Since the original issue of this service bulletin, Boeing has received three more reports of STA 320 crown frame web cracking on 747-400 airplanes with a 0.08 inch thick web. The reports were of a crack (length not specified) reported at 9,456 flight cycles, a 0.65 inch crack reported at 29,866 flight cycles and a 0.85 inch crack reported at 29,956 flight cycles.
Accomplishment of the work given in this service bulletin will determine if the web of the STA 320 crown frame is the correct design thickness and if fasteners are missing from the web. If the web is not the correct thickness, or is missing fasteners, this service bulletin provides inspections to find possible cracks in the STA 320 crown frame. This service bulletin also provides instructions for replacement of the STA 320 crown frame web if it is not the correct design thickness.
Boeing Service Related Problem (SRP) 747-SRP-53-319 is related to this service bulletin.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 9 of 237
As a part of a service bulletin validation program, this inspection and change was completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue before the release of Revision 1 of this service bulletin. The inspection and change completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane RT437 has the configuration of a Group 1 airplane.
ACTION (PRR 85901-93RS) Measure the thickness of the STA 320 crown frame web. For airplanes with a 0.136-0.145 inch thick web, no action is required. For airplanes with a 0.078-0.083 inch thick web, do a detailed inspection for cracks and a general visual inspection for missing fasteners of the STA 320 crown frame from LBL 30.0 to RBL 30.0. If any crack is found in the upper or lower chord, contact Boeing for repair instructions. Replace the web. For airplanes with a 0.078-0.083 inch thick web and no repair doubler installed, if no cracks are found in the frame it is optional to do a High Frequency Eddy Current (HFEC) inspection of the web to delay web replacement if no crack is found by the HFEC inspection. If web replacement is delayed, replace all missing fasteners.
After the web is replaced, do repeat detailed inspections of the web, upper chord, lower chord and lower chord splice for cracks. If any crack is found, contact Boeing for repair instructions.
EFFECTIVITY 747-400/-400D/-400F airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE Refer to Paragraph 1.E., Compliance.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service bulletin.
MANPOWER Elapsed HoursTotal Task HoursAirplanes
126.15216.15All airplanes
MATERIAL INFORMATION Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 10 of 237 BOEING SERVICE BULLETIN 747-53A2784
BOEING SERVICE BULLETIN 747-53A2784
MEASURE THE THICKNESS OF THE WEB. IF THE WEB IS 0.136-0.145 INCH THICK NO ACTION IS REQUIRED.
RBL
7.5 BL O
IF ANY CRACK IS FOUND
IN THE WEB, REPLACE THE WEB. IF A REPAIR
DOUBLER IS INSTALLED
ON THE WEB, REPLACE THE WEB.
STA 320 IF THE WEB IS 0.078-0.083 INCH THICK,
DO A DETAILED INSPECTION OF THE STA 320 FRAME BETWEEN LBL 30.0 AND RBL 30.0 FOR CRACKS AND
MISSING FASTENERS IN THE LOWER CHORD.
SOME STRUCTURE NOT SHOWN FOR CLARITY 1703583 Original Issue: August 27, 2009 Revision 1: September 14, 2011 Copyright © Unpublished Work - See page 1 for details. BOEING PROPRIETARY - 747-53A2784 11 of 237
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009 747-53A2784Revision 1: September 14, 2011 12 of 237 BOEING SERVICE BULLETIN 747-53A2784