Copy · U.S. DOT/FAA - SB-747-57A2343-01 · 68 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-0828, the docket of AD 2015-25-03. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '8be4fa4ba4e85edb16a97fe81f1d16e656fcb14a398b2ee83051ee2c58f65828'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 37–48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one side of the airplane.

More DataQtyIdentificationNameTaskStep Do a DET to determine if the cylindrical defect is present. The Actuator Attach Fitting should only have a conical profile. On some fittings the upper portion of the bore was made with a cylindrical defect perpendicular to the base. A borescope can be used to do this inspection.

1-Actuator Attach Fitting Inspect1 The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.

More DataFlag Note The cylindrical defect results in a circular ridge where the ID transitions from a conical section to a hemispherical section. When looking into the fitting with a bright light, the circular ridge is seen as change in the color, due to the change in angle of the machining. The cylindrical defect, if present, will be seen as a constant diameter feature perpendicular to the base until it transitions into the hemispherical region.

1 FIGURE 2: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - DET INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 12, 2013 747-57A2343Revision 1 June 23, 2014 49 of 68 BOEING SERVICE BULLETIN 747-57A2343

ALERTALERT

Page 50OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT

B ATTACH FITTING A-A 2268834 FIGURE 3: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 1 OF 5) Original Issue: September 12, 2013 Revision 1 June 23, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 747-57A2343 Work - See page 1 for details. 50 of 68

Page 51OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT UPPER

JOURNAL

2.0

MINIMUM LOWER

JOURNAL 2268691 FIGURE 3: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 2 OF 5) Original Issue: September 12, 2013 Revision 1 June 23, 2014 Export Controlled ECCN: 9E991 - BOEING 747-57A2343 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 68

Page 52OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT UPPER

JOURNAL

MINIMUM

THICKNESS

0.5

CONICAL

PROFILE UPPER

JOURNAL

WITHOUT CYLINDRICAL DEFECT

MINIMUM

THICKNESS

CONICAL

0.5 PROFILE

• CYLINDRICAL DEFECT

WITH CYLINDRICAL DEFECT 2268817 FIGURE 3: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 3 OF 5) Original Issue: September 12, 2013 Revision 1 June 23, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 747-57A2343 Work - See page 1 for details. 52 of 68

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one side of the airplane.

More DataQtyIdentificationNameTaskStep Do an Ultrasonic inspection to determine the minimum thickness of the actuator attach fitting wall in the indicated area in accordance with 747 NDT Manual Part 4, 51-00- 00, Procedure 2 or Procedure 3. It is recommend the measurements be recorded for future reference. Remove finish if required;

refer to SOPM 20-30-03 as an accepted procedure. As an option, mechanically measure the Actuator Attach Fitting to determine the minimum thickness of the Actuator Attach Fitting in the indicated area. Scan the vertical surface every 45 + or - 10 degrees.

Mark the minimum thickness location, then scan the entire circumference a minimum of

0.5 inch above and below location of the minimum thickness.

1-Actuator Attach Fitting Inspect1 FIGURE 3: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 4 OF 5) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 12, 2013 747-57A2343Revision 1 June 23, 2014 53 of 68 BOEING SERVICE BULLETIN 747-57A2343

ALERTALERT

More DataQtyIdentificationNameTaskStep Touch-up bare surfaces. Refer to SOPM 20- 42-10 as an accepted procedure. (a) --Low Hydrogen Embrittlement Cadmium Plating Apply2 Touch-up bare surfaces. 2 coats. (a)-BMS 10-11, TYPE I PrimerApply Do a DET of the inner surface of the fitting assembly to determine if a machining defect is present. There should be a smooth transition between the conical section and the hemispherical section. A machining defect is present when there is an obvious step, mismatch, gouge, or irregularity that is clearly visible under the protective finish in this area. Finish removal is not required to identify if any of these defects are present.

1-Actuator Attach Fitting Inspect3

(a) Required only if the actuator attach fitting is not being replaced or overhauled and the existing finish was removed to accomplish the inspection.

FIGURE 3: LEFT WING - NO. 2 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 5 OF 5) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 12, 2013 747-57A2343Revision 1 June 23, 2014 54 of 68 BOEING SERVICE BULLETIN 747-57A2343

ALERTALERT

Page 55OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT

ATTACH FITTING B A-A 2268860 FIGURE 4: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - PART NUMBER INSPECTION (SHEET 1 OF 2) Original Issue: September 12, 2013 Revision 1 June 23, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 747-57A2343 Work - See page 1 for details. 55 of 68

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one side of the airplane.

More DataQtyIdentificationNameTaskStep to determine if a 65B08564-7 is installed.

The part number is rubber stamped between the feet on either the inboard or outboard side of the fitting.

1-Actuator Attach Fitting Inspect1 If the part number is not visible,it can be determined if a 65B08564-7 is installed by measuring the internal diameter at the location shown. It may be necessary to disconnect the actuator ball screw nut to gain access. Refer to 747-100/200/300 AMM 27-51- 41 or 747-400 AMM 27-51-41 as accepted procedures.

1-Actuator Attach Fitting Measure2 The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.

More DataFlag Note The diameter of the feature is approximately as follows:1

1. 2.5 +/- 0.05 inches for the 65B08564-7

2. 2.85 +/- 0.05 inches for the 65B08564-1 or -5.

FIGURE 4: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - PART NUMBER INSPECTION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 12, 2013 747-57A2343Revision 1 June 23, 2014 56 of 68 BOEING SERVICE BULLETIN 747-57A2343

ALERTALERT

Page 57OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT

ATTACH FITTING A-A 2268871 FIGURE 5: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - DET INSPECTION (SHEET 1 OF 3) Original Issue: September 12, 2013 Revision 1 June 23, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 747-57A2343 Work - See page 1 for details. 57 of 68

Page 58OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT

MINIMUM

THICKNESS

CONICAL CYLINDRICAL 1 PROFILE DEFECT

CIRCULAR RIDGE D 2268908 FIGURE 5: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - DET INSPECTION (SHEET 2 OF 3) Original Issue: September 12, 2013 Revision 1 June 23, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished 747-57A2343 Work - See page 1 for details. 58 of 68

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for one side of the airplane.

More DataQtyIdentificationNameTaskStep Do a DET to determine if the cylindrical defect is present. The Actuator Attach Fitting should only have a conical profile. On some fittings the upper portion of the bore was made with a cylindrical defect perpendicular to the base.

1-Actuator Attach Fitting Inspect1 The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.

More DataFlag Note The cylindrical defect results in a circular ridge where the ID transitions from a conical section to a hemispherical section. When looking into the fitting with a bright light, the circular ridge is seen as change in the color, due to the change in angle of the machining. The cylindrical defect, if present, will be seen as a constant diameter feature perpendicular to the base until it transitions into the hemispherical region.

1 FIGURE 5: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - DET INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 12, 2013 747-57A2343Revision 1 June 23, 2014 59 of 68 BOEING SERVICE BULLETIN 747-57A2343

ALERTALERT

Page 60OCROpen in PDF

BOEING SERVICE BULLETIN 747-57A2343

ALERT ALERT

ATTACH FITTING A-A 2268907 FIGURE 6: RIGHT WING - NO. 7 ACTUATOR ATTACH FITTING - MINIMUM WALL THICKNESS AND

MACHINING DEFECT INSPECTION (SHEET 1 OF 5) Original Issue: September 12, 2013 Revision 1 June 23, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 747-57A2343 Work - See page 1 for details. 60 of 68

Pages 61–68 of 68