TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '3644b51d2dd030da249aabefe2d2d40d7d8f78fdf1ad209553d2ac5ce01c57cf' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '3644b51d2dd030da249aabefe2d2d40d7d8f78fdf1ad209553d2ac5ce01c57cf' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 10 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 124 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 11 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 125 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT
STA STA 900 860
FEEDTHRU W4236 AD0881 (AD881)
DISCONNECT
BRACKET D43412J POS 14 GD5490S
ROTATED RIGHT BODY FAIRING 2993499 FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 12 OF 12) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 126 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT _ This Figure applies only to: Group 5, Configuration 1.
W4236 AD0881 (AD881) -10 AP0033 (P33) PRESSURE SEAL 2 LOCATIONS 2 LOCATIONS 2 LOCATIONS 15 2519R-10 2 W1230 W2514 2519B-10 2 LOCATIONS D43312P POS 11 QI: GD5490-ST D43412J POS 14 > FIND NUMBER • ADDED WIRE OR NEW ROUTING 2992182 REFERENCE: 757 WDM 29-22-11 The find numbers (No.) shown below agree with the find number symbol in the figure.
Find No. Name Identification Qty More Data 1 CONTACT, SOCKET P-204541 4 (a) 2 CONNECTOR, ELECTRI- BACC63BV18F8S8 1 (a)
CAL, RECEPTACLE,
FLANGE MOUNT,
THREADED COUPLING, VIBR. RES.
BACKSHELL BACC10KD18 1 (b) SLEEVE, OVERBRAID 280N3381-10301 1 (c) 5 TERMINAL -, LUC BACT12AC12 1 (d) (e) (f) WASHER BACW10BР3APU 1 (f) (s) NUT BACN10JC3CM 1 (f)(s) PLUG, END SEAL MS27488-12-2 6 (a) 7 ID - EQUIPMENT 280N3381-10701 1 (g) ID - WIRE 280N3381-10303 12 (n) 9 ID - BUNDLE 280N3381-10304 2 (i) FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION (SHEET 1 OF 3) Original Issue: November 16, 2023 Revision 1 May 28, 2026 757-29A0071 RB Export Controlled ECCN: 9E991 See page 1 for details 127 of 286
More DataQtyIdentificationName Find No.
(j)(k)2829A9003-384INSULATION SLEEVING,
HEAT SHRINKABLE, YEL- LOW, IN DIA 3/8", CLASS 1 10
(k)(l)2829A9003-124INSULATION SLEEVING,
HEAT SHRINKABLE, YEL- LOW, IN DIA .5 INCH CLASS 1 11
(k)(n)1280N3381-10305SLEEVE, EXPANDABLE12
(d)(e)(f)1BACT12AC56TERMINAL, LUG13
(o)-280N3381-107WWIRE - RAW MATERIAL15
(p)-280N3381-1001LACING TAPE - BLUE - PRESSURIZED (TEMP 135 DEG)
(q)(r)-BACS38K1STRAP
(q)(r)-BACS38K4STRAP
(q)(r)-BACS38K5STRAP
(m)1280N3381-12506ID - GROUND20
(a) Refer to SWPM 20-61-11 as an accepted procedure.
(b) Refer to SWPM 20-60-09 as an accepted procedure.
(c) Install between the pressure seal and the electrical connector. Refer to SWPM 20-25-11 as an accepted procedure.
(d) Refer to SWPM 20-30-11 as an accepted procedure.
(e) Refer to SWPM 20-20-00 as an accepted procedure.
(f) Refer to SWPM 20-20-10, Category 6 as an accepted procedure.
(g) Install within 6 inches of equipment.
(h) Install within 4 inches of equipment and at 72 inches +/- 1 inch spaces between ID tapes.
(i) Install over sleeve, overbraid within 12 inches of the electrical connector and pressure seal.
(j) Install over ends of sleeve, expandable.
(k) Refer to SWPM 20-10-14 as an accepted procedure.
(l) Install over ends of sleeve, overbraid.
(m) Install within 4 inches of ground.
(n) Install under the sleeve, overbraid.
(o) Refer to SWPM 20-10-11 as an accepted procedure.
FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION (SHEET 2 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 128 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
More DataQtyIdentificationName Find No.
(p) Refer to SWPM 20-10-11 and SWPM 20-10-19 as accepted procedures.
(q) Select the strap size to fit the wire bundle and install at 6 - 8 inch spacing intervals. Refer to SWPM 20- 10-11 as an accepted procedure.
(r) Only install in pressurized areas.
(s) If the part size does not fit, use WASHER BACW10BP( )APU and NUT BACN10JC( )CM as required.
WIRE LIST - CUT AND CODE AS REQUIRED
NOTESMATERIAL SPECIFICATIONLENGTH (INCHES) TYPE CODE GAGE COLOR WIRE NUMBER WIRE BUNDLE -BMS13-48T10C02G010821PB102519BW4236 -PB102519RW4236 FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 129 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT This Figure applies only to: Group 5, Configuration 1.
STA 870 S-19R - S-20R BUNDLE WIRE STA 879 FWD STA 860
VIEW LOOKING INBOARD 2993233 FIGURE 31: RIGHT BODY FAIRING - FEEDTHRU - INSTALLATION (SHEET 1 OF 2) Original Issue: November 16, 2023 Revision 1 May 28, 2026 757-29A0071 RB Export Controlled ECCN: 9E991 See page 1 for details 130 of 286
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep -1-RING, RETAININGRemove1 -2-SEALRemove -1-SEAL, RINGRemove
(a)1BACS11BD5 (BACS11BD6 optional) SEAL, RINGInstall (New)2
(a)2BACS45B3SEALInstall (New)
(a)1MS16624-2156RING, RETAINING, EXT Install (New)
(a)-BMS5-37, CLASS B-1/2 (BMS5-37, CLASS B-2 or BMS5-45, CLASS B-2 or BMS5-45, CLASS B-1/2 optional) SEALANTApply3
(a) Refer to SWPM 20-10-20 as an accepted procedure.
FIGURE 31: RIGHT BODY FAIRING - FEEDTHRU - INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 131 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT This Figure applies only to: Group 5, Configuration 1.
STA 870 W4236 W4236
ALTERNATIVE
CONFIGURATION 34€
S STA STA 860 879 W4236 NEW
FEEDTHRU S-18R - S-19R - S-20R - RIGHT FORWARD CARGO COMPARTMENT MIXBAY 3013276 The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
FIGURE 32: RIGHT FORWARD CARGO MIXBAY - WIRE BUNDLE W4236 CLAMP - INSTALLATION (SHEET 1 OF 2) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 132 of 286
More DataQtyIdentificationNameTaskStep
(a)(b)(e)(f)1BACC10GE8CLAMP, LOOPInstall (New)1
(a)(b)(c)(e)(f)-35450-1BUSHING RUBBERInstall (New)2
(a)(b)(e)(f)1NAS1149D0332JWASHERInstall (New)3
(a)(b)(d)(e)(f)1BACS12GU3K8SCREWInstall (New)4
(a)(b)(e)(f)1BACN10YR3CDNUTInstall (New)5 -1BACS12GU3K( )SCREWRemove6
(a)(b)1287T0011-1CLAMP OLYMPICInstall (New)
(a)(b)(c)135450-1BUSHING RUBBERInstall (New)
(a)(b)(d)1BACS12GU3K12SCREWInstall (New)
(a)(b)1BACS38W3STRAPInstall (New)
(a) Alternate part numbers are acceptable that meet the requirements for SWPM 20-10-12.
(b) Refer to SWPM 20-10-12 as an accepted procedure.
(c) Use quantity of rubber bushings as necessary.
(d) It is acceptable to use one grip length up or down as necessary.
(e) If a ring post is found at this location, the ring post can be kept and used in place of the clamp.
(f) If no clamp or ring post is found at this location, do steps 1 through 5. If an existing clamp is found, do step 6.
FIGURE 32: RIGHT FORWARD CARGO MIXBAY - WIRE BUNDLE W4236 CLAMP - INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 133 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT _ This Figure applies only to: Group 5, Configuration 1.
STA 900
STA STA 900 860 AD0881 (AD881)
DISCONNECT
BRACKET D43412J POS 14 W4236 4 LOCATIONS
RIGHT BODY FAIRING W4236 4 LOCATIONS 2993683 FIGURE 33: DISCONNECT BRACKET AD0881 - ELECTRICAL CONNECTOR D43412J- INSTALLATION (SHEET 1 OF 2) Original Issue: November 16, 2023 Revision 1 May 28, 2026 757-29A0071 RB Export Controlled ECCN: 9E991 See page 1 for details 134 of 286
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)4BACS12HN04-8SCREWInstall (New)1
(a)4NAS1149DN416JWASHERInstall (New)
(a)4BACN10YR04CDNUTInstall (New)2
(a) Refer to SWPM 20-60-06 as an accepted procedure.
FIGURE 33: DISCONNECT BRACKET AD0881 - ELECTRICAL CONNECTOR D43412J - INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 135 of 286 REQUIREMENTS BULLETIN 757-29A0071