Copy · 757-57A0073 RB R2 - BOEING · 105 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0685; AD 2022-08-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '19c9f832fb170cffac87c5a27446269d7d2f2f4d80b9a2f63c40f9392f252750'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 Revision 2: March 01, 2021 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

Copyright © 2017 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 1 of 105

4.0

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 2 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

1 . E F F E C T I V I T Y7

A. Airplanes7

B . S p a r e s A f f e c t e d ........................................... 1 0

2. CONCURRENT REQUIREMENTS .................................... 1 0 3 . C O M P L I A N C E ............................................... 1 0

4. APPROVAL ................................................ 3 5

5. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 7 A. General Information ......................................... 3 7 B. Work Instructions ........................................... 3 9 FIGURE 1: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 5 4 FIGURE 2: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 5 6 FIGURE 3: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM MIGRATION INSPECTION .................................................. 5 8 FIGURE 4: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM MIGRATION INSPECTION .................................................. 6 2 FIGURE 5: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 6 6 FIGURE 6: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 6 8 FIGURE 7: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 7 0 FIGURE 8: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 7 2 FIGURE 9: LEFT WING- DIAGONAL BRACE AND DIAGONAL BRACE FITTINGS - GENERAL VISUAL INSPECTION FOR CRACKS ................................. 7 4 FIGURE 10: RIGHT WING- DIAGONAL BRACE AND DIAGONAL BRACE FITTINGS - GENERAL VISUAL INSPECTION FOR CRACKS ................................. 7 7 FIGURE 11: LEFT WING - WING UPPER SKIN - DETAILED INSPECTION FOR CRACKS ...... 8 0 FIGURE 12: RIGHT WING - WING UPPER SKIN - DETAILED INSPECTION FOR CRACKS ...... 8 2 FIGURE 13: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 84 FIGURE 14: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 86 FIGURE 15: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 88 FIGURE 16: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 1-9] .................................................. 9 0 FIGURE 17: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] . 92 FIGURE 18: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 9 4 FIGURE 19: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 9 6 FIGURE 20: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 9 8 FIGURE 21: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 11-18 OPEN-HOLE HFEC INSPECTION ..................................... 1 0 0 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 3 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

FIGURE 22: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 11-18 OPEN-HOLE HFEC INSPECTION ..................................... 1 0 3 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 4 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Commercial Airplanes 757 Requirements Bulletin ALERT Revision Transmittal SheetNumber: 757-57A0073 RBOriginal Issue: July 14, 2017 Revision 2: March 01, 2021 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections This revision includes all pages of the requirements bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2020-21-17 is related to the requirements bulletin. The effective date of AD 2020-21-17 is January 14, 2021.

Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2019-NM-161-AD, is related to this service bulletin.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to the Requirements Bulletin 757-57A0073 RB Revision 2. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 757-57A0073 RB Revision 2 mandatory.

Effects of this Revision on airplanes on which the Revision 1 Issue of this Service Bulletin was previously done:

None.

Effects of this Revision on airplanes on which the Original Issue of this Service Bulletin was previously done:

ActionConditionGroup Do an open-hole High Frequency Eddy Current (HFEC) inspection at fastener locations 1-10 for any crack and do applicable on-condition actions at the revised times specified in Compliance.

Airplanes on which the Original Issue of this Service Bulletin was previously done.

3-4

REASON FOR REVISION This revision is sent to revise the compliance time for Open-Hole High Frequency Eddy Current inspections of holes 1-10 for airplanes in Groups 3 and 4.

These sections were changed:

- In Compliance, updated Airworthiness Directive (AD) related information to be Revision 2.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 5 of 105

- In Compliance, added Notice of Proposed Rule Making (NPRM) related information.

- In Compliance, updated compliance time in Table 1 through Table 9.

REVISION HISTORY Service BulletinService BulletinRequirement BulletinRequirement Bulletin 757-57A0073757-57A0073757-57A0073 RB757-57A0073 RB Issue DateIssue Date July 14, 2017Original Issue:July 14, 2017Original Issue:

August 01, 2019Revision 1:August 01, 2019Revision 1:

March 01, 2021Revision 2:March 01, 2021Revision 2:

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 6 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 Revision 2: March 01, 2021 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING

PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. Effectivity A. Airplanes This bulletin is applicable to 757-200, 757-200CB, 757-200PF, 757-300 Airplane(s), line number(s) 1-1050 in 11 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

DESCRIPTIONCONFIGURATIONGROUP 757-200/-200CB/-200PF Airplanes, Line Numbers 1-735 with Rolls-Royce engines and with cold work -1 Airplanes that have not accomplished SB 757-54-0035.1 Airplanes that have accomplished SB 757-54-0035.2 757-200/-200PF Airplanes, Line Numbers 736-802 with Rolls-Royce engines and with cold work.

-2 757-200 Airplanes, Line Numbers 803-1009 with Rolls-Royce engines and without cold work -3 757-200 Airplanes, Line Numbers 1010-1050 with Rolls-Royce engines and without cold work -4 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 7 of 105

DESCRIPTIONCONFIGURATIONGROUP 757-200/-200PF Airplanes, Line Numbers 1-735 with Pratt and Whitney engines and with cold work -5 Airplanes that have not accomplished SB 757-54-0034.1 Airplanes that have accomplished SB 757-54-0034.2 757-200 Airplanes, Line Numbers 736-802 with Pratt and Whitney engines and with cold work -6 757-200 Airplanes, Line Numbers 803-1009 with Pratt and Whitney engines and without cold work -7 757-200 Airplanes, Line Numbers 1010-1050 with Pratt and Whitney engines and without cold work -8 757-300 Airplanes, Line Numbers 804-855 with Rolls-Royce engines and shear-head bolts in the drag fitting and without cold work -9 757-300 Airplanes, Line Numbers 906-1043 with Rolls-Royce engines and tension-head bolts in the drag fitting and without cold work -10 757-300 Airplanes, Line Numbers 906-1043 with Pratt and Whitney engines and tension-head bolts in the drag fitting and without cold work -11 Airplane Models:

757-200, 757-200CB, 757-200PF, 757-300 GroupVariable Number 5NA001 1NA002 - NA028 1NA191 - NA199 1NA201 - NA239 1NA301 - NA305 1NA341 - NA352 1NA391 - NA399 1NA401 - NA408 1NA441 - NA447 5NA501 - NA586 GroupVariable Number 5NB001 - NB004 1NB021 - NB023 1NB036 - NB041 1NB051 - NB053 1NB061 - NB073 1NB079 1NB131 - NB148 1NB161 - NB162 5NB166 - NB168 1NB201 - NB204 GroupVariable Number 1NB221 - NB225 2NB226 - NB228 2NB230 1NB236 1NB239 1NB261 - NB267 1NB291 - NB299 1NB301 - NB302 1NB311 - NB312 1NB321 - NB331 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 8 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

GroupVariable Number 1NB421 - NB438 1NB446 1NB451 - NB454 1NB501 - NB523 1NB561 2NB571 2NB581 - NB583 5NC001 - NC033 5NC041 - NC042 5NC051 - NC052 5NC056 - NC057 1NC058 - NC061 2NC062 5NC066 - NC076 6NC077 - NC084 6NC091 - NC094 5NC151 6NC161 5NC901 - NC935 1NC936 - NC950 5NC951 1NC971 - NC974 1ND001 - ND007 1ND011 - ND059 1ND111 - ND113 1ND161 - ND199 1ND201 - ND203 1ND221 - ND225 1ND241 - ND248 1ND301 - ND317 2ND318 - ND322 2ND401 1ND891 GroupVariable Number 1ND895 5NE001 - NE007 6NE008 5NE011 - NE088 5NE091 - NE094 5NE141 - NE150 5NE161 - NE177 5NE201 - NE204 5NE301 - NE302 5NE311 - NE325 4NJ001 - NJ004 4NJ031 - NJ032 8NJ551 - NJ555 10NL001 - NL002 10NL006 - NL017 10NL101 - NL109 10NL141 11NL601 - NL616 3NN001 - NN002 3NN051 - NN052 6NP901 - NP902 7NP903 - NP904 1NS601 - NS610 2NS611 - NS616 2NT001 - NT004 3NT005 - NT009 3NT201 - NT202 2NT231 - NT232 3NT233 - NT234 3NT237 - NT240 3NT242 3NT245 - NT248 2NT281 GroupVariable Number 3NT282 - NT289 6NT341 - NT344 7NT345 - NT346 8NT347 6NT351 7NT352 - NT360 7NT371 - NT373 7NT375 - NT379 2NT381 3NT382 - NT385 4NT386 2NT401 - NT403 3NT404 - NT409 3NT411 - NT412 3NT426 - NT427 3NT431 - NT432 3NT436 - NT438 7NT441 - NT442 3NT446 6NT701 7NT702 - NT730 3NT731 - NT750 2NT751 - NT758 3NT759 - NT769 6NT791 - NT794 7NT795 - NT796 2NT861 3NT862 7NT881 - NT885 3NT901 - NT916 3NT971 - NT984 4NT985 7NU031 - NU035 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 9 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

GroupVariable Number 8NU036 - NU038 9NU701 GroupVariable Number 10NU702 - NU705 9NU721 - NU726 GroupVariable Number 10NU727 - NU728 10NU731 - NU732 B. Spares Affected None.

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2020-21-17 is related to Requirements Bulletin 757-57A0073 RB. The effective date of AD 2020-21-17 is January 14, 2021.

Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2019-NM-161-AD, is related to this service bulletin.

The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to Requirements Bulletin 757-57A0073 R02 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 757-57A0073 R02 RB mandatory.

Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 16, in accordance with the Accomplishment Instructions.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.

Each Group has three tables that give the compliance for the affected airplanes. The following table shows which compliance tables apply to each Group.

Applicable TablesGroups Table 7, Table 9, Table 10Group 1, Configuration 1:

Table 1, Table 3, Table 11Group 1, Configuration 2:

Table 1, Table 3, Table 12Group 2:

Table 1, Table 4, Table 12Group 3-4:

Table 8, Table 9, Table 13Group 5, Configuration 1:

Table 1, Table 5, Table 14Group 5, Configuration 2:

Table 1, Table 5, Table 15Group 6:

Table 1, Table 6, Table 15Group 7-8:

Table 1, Table 6, Table 16Group 9:

Table 2, Table 6, Table 16Group 10:

Table 2, Table 6, Table 15Group 11:

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 10 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:

Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 2,100 flight cycles after the Revision 1 date of Requirements Bulletin 757- 57A0073 RB Before 6,000 total flight cycles ACTION 1: Do a general visual inspection of the diagonal brace and diagonal brace fittings for any crack.

All Airplanes -Within 3,000 flight cycles after the Original Issue date of Requirements Bulletin 757- 57A0073 RB ACTION 2: Do inspections for loose fasteners, skin cracks and shim migrations.

-Before further flightContact The Boeing Company for repair instructions and do the repair.

CONDITION 1: ANY

CRACK FOUND IN DIAG-

ONAL BRACE OR DIAGO- NAL BRACE FITTINGS (a) 2,100 flight cycles-Repeat general visual inspection of the diagonal brace and diagonal brace fittings for any crack.

CONDITION 2: NO

CRACK FOUND IN DIAG-

ONAL BRACE OR DIAGO- NAL BRACE FITTINGS (a) -Before further flightCONDITION 3 (ACTION

1): Install the Upper Link and Upper Link Pins if removed.

CONDITION 3: NO SHIM

MIGRATION, NO SKIN

CRACK AND NO LOOSE FASTENER.

3,000 flight cycles-CONDITION 3 (ACTION

2): Repeat inspections for loose fasteners, skin cracks and shim migrations.

-Before further flightDo open-hole HFEC inspection of fastener holes 1-10 for cracks.

CONDITION 4: ANY

LOOSE FASTENER

FOUND ON FASTENERS 1-10 (a) -Before further flightDo open-hole HFEC inspection on the loose bolt hole(s) for cracks.

CONDITION 5: ANY

LOOSE FASTENER

FOUND ON FASTENERS 11-18 (a) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 11 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:

Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair.

CONDITION 6: MAJOR

SHIM MIGRATION FOUND (a) -Before further flightOPTION 1: Contact The Boeing Company for repair instructions and do the repair.

CONDITION 7: ANY

CRACK FOUND IN THE DRAG FITTINGS (a) -Before further flightOPTION 2 (ACTION 1):

Replace any cracked drag fitting with a new part.

-Before further flightOPTION 2 (ACTION 2):

Install the Upper Link and Upper Link Pins if removed.

3,000 flight cycles-OPTION 2 (ACTION 3):

Repeat inspections for loose fasteners, skin cracks and shim migrations.

-Before further flightContact The Boeing Company for repair instructions and do the repair.

CONDITION 8: ANY

CRACK FOUND IN SKIN

(a) -Before further flightCONDITION 9 (ACTION

1): Install new or serviceable bolts, new or kept washers, and new nuts for fastener holes where fasteners were removed.

CONDITION 9: NO

CRACK FOUND IN SKIN

AND DRAG FITTINGS

DURING OPEN-HOLE HFEC INSPECTION (a) -Before further flightCONDITION 9 (ACTION

2): Install the Upper Link and Upper Link Pins if removed.

3,000 flight cycles-CONDITION 9 (ACTION

3): Repeat inspections for loose fasteners, skin cracks and shim migrations.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RBRevision 2: March 01, 2021 12 of 105 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Pages 13–24 of 105