TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '959ce5aa4107897ac38853d21bcc3460eebc15dc53854d524deb9b152f78eb37' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '959ce5aa4107897ac38853d21bcc3460eebc15dc53854d524deb9b152f78eb37' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 Revision 1: August 01, 2019 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 1 of 103
5.0
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 2 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
BLANK PAGE
Table of Contents
Revision Transmittal Sheet5
1 . E F F E C T I V I T Y7
A. Airplanes7
B . S p a r e s A f f e c t e d8
2. CONCURRENT REQUIREMENTS8
3 . C O M P L I A N C E8
4. APPROVAL ................................................ 3 4
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 5 A. General Information ......................................... 3 5 B. Work Instructions ........................................... 3 7 FIGURE 1: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 5 2 FIGURE 2: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 5 4 FIGURE 3: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM M IGRATION INSPECTION .................................................. 5 6 FIGURE 4: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM MIGRATION INSPECTION .................................................. 6 0 FIGURE 5: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTEN ER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 6 4 FIGURE 6: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTE NER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 6 6 FIGURE 7: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 6 8 FIGURE 8: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 7 0 FIGURE 9: LEFT WING- DIAGONAL BRACE AND DIAGONAL BRACE FITTINGS - GENERAL VISUAL INSPECTION FOR CRACKS ................................. 7 2 FIGURE 10: RIGHT WING- DIAGONAL BRACE AND DIAGONAL BRACE FITTING S - GENERAL VISUAL INSPECTION FOR CRACKS ................................. 7 5 FIGURE 11: LEFT WING - WING UPPER SKIN - DETAILED INSPECTION FOR C R A C K S ...... 7 8 FIGURE 12: RIGHT WING - WING UPPER SKIN - DETAILED INSPECTION FO R C R A C K S ...... 8 0 FIGURE 13: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 82 FIGURE 14: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 84 FIGURE 15: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 86 FIGURE 16: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQU E CHECK [Group 1-9] .................................................. 8 8 FIGURE 17: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] . 90 FIGURE 18: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 9 2 FIGURE 19: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 9 4 FIGURE 20: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQU E CHECK [Group 10-11] .................................................. 9 6 FIGURE 21: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTE NER 11-18 OPEN-HOLE HFEC INSPECTION ...................................... 9 8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 3 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
FIGURE 22: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - FAST ENER 11-18 OPEN-HOLE HFEC INSPECTION ..................................... 1 0 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 4 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Commercial Airplanes 757 Requirements Bulletin ALERT Revision Transmittal SheetNumber: 757-57A0073 RBOriginal Issue: July 14, 2017 Revision 1: August 01, 2019 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections This revision includes all pages of the requirements bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-16-05 is related to the requirements bulletin. The effective date of the AD 2018-16-05 is September 10, 2018.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to the Requirements Bulletin 757-57A0073 RB Revision 1. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 757-57A0073 RB Revision 1 mandatory.
Effects of this Revision on airplanes on which Original Issue of this Service Bulletin was previously done:
ActionConditionGroup Do an open-hole High Frequency Eddy Current (HFEC) inspection at fastener locations 11-18 for any crack and do applicable on-condition actions.
Airplanes on which the Original Issue of this Service Bulletin was previously done.
Group 1-11:
REASON FOR REVISION This revision is sent to add Open-Hole High Frequency Eddy Current (HFEC) inspections at fastener locations 11-18 and update the inspection interval for the general visual inspection of the diagonal brace and diagonal brace fittings.
The data given in Information Notice 757-57A0073 IN01 is included in this revision.
These sections were changed:
– In Effectivity, Airplanes, updated the effectivity paragraph f ormat.
– In Compliance, added and updated Airworthiness Directive (AD) related information. Updated inspection interval for the diagonal brace and diagonal brace fittings in tables 1, 2 and 9. Also updated existing paragraphs and the group applicability table, updated Tables 1-8, and added new Tables 9-16.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 5 of 103
– In Approval of the requirements bulletin, added alternative method of compliance (AMOC) approval paragraph.
– In Accomplishment Instructions, General Information, updated t he list.
– In Accomplishment Instructions, Work Instructions, Actions Required for Compliance, updated PARTS table, updated Tables 1-3, and added new Tables 4-7.
– In FIGURE 5 and FIGURE 6, change fastener inspection procedure .
– In FIGURE 7 and FIGURE 8, added fastener inspection procedure.
– In FIGURE 21 and FIGURE 22, added new inspection information f or fastener locations 11-18.
Vertical lines are put on the left edge of each page, except in Effectivity and format changes, to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY Service BulletinService BulletinRequirement BulletinRequirement Bulletin 757-57A0073757-57A0073757-57A0073 RB757-57A0073 RB Issue DateIssue Date July 14, 2017Original Issue:July 14, 2017Original Issue:
August 01, 2019Revision 1:August 01, 2019Revision 1:
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 6 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 Revision 1: August 01, 2019 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. EFFECTIVITY A. Airplanes This bulletin is applicable to 757-200, 757-200CB, 757-200PF, 757-300 Airplane(s), line number(s) 1-1050 in 11 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
DESCRIPTIONCONFIGURATIONGROUP 757-200/-200CB/-200PF Airplanes, Line Numbers 1-735 with Rolls-Royce engines and with cold work -1 Airplanes that have not accomplished SB 757-54-0035.1 Airplanes that have accomplished SB 757-54-0035.2 757-200/-200PF Airplanes, Line Numbers 736-802 with Rolls-Royce engines and with cold work.
-2 757-200 Airplanes, Line Numbers 803-1009 with Rolls-Royce engines and without cold work -3 757-200 Airplanes, Line Numbers 1010-1050 with Rolls-Royce engines and without cold work -4 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 7 of 103
DESCRIPTIONCONFIGURATIONGROUP 757-200/-200PF Airplanes, Line Numbers 1-735 with Pratt and Whitney engines and with cold work -5 Airplanes that have not accomplished SB 757-54-0034.1 Airplanes that have accomplished SB 757-54-0034.2 757-200 Airplanes, Line Numbers 736-802 with Pratt and Whitney engines and with cold work -6 757-200 Airplanes, Line Numbers 803-1009 with Pratt and Whitney engines and without cold work -7 757-200 Airplanes, Line Numbers 1010-1050 with Pratt and Whitney engines and without cold work -8 757-300 Airplanes, Line Numbers 804-855 with Rolls-Royce engines and shear-head bolts in the drag fitting and without cold work -9 757-300 Airplanes, Line Numbers 906-1043 with Rolls-Royce engines and tension-head bolts in the drag fitting and without cold work -10 757-300 Airplanes, Line Numbers 906-1043 with Pratt and Whitney engines and tension-head bolts in the drag fitting and without cold work -11 B. Spares Affected None.
2. CONCURRENT REQUIREMENTS None.
3. COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-16-05 is related to the requirements bulletin. The effective date of AD 2018-16-05 is September 10, 2018.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to the Requirements Bulletin 757-57A0073 RB Revision 1. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 757-57A0073 RB Revision 1 mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 16, in accordance with the Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 8 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Each Group has three tables that give the compliance for the affected airplanes. The following table shows which compliance tables apply to each Group.
Applicable TablesGroups Table 7, Table 9, Table 10Group 1, Configuration 1:
Table 1, Table 3, Table 11Group 1, Configuration 2:
Table 1, Table 3, Table 12Group 2:
Table 1, Table 4, Table 12Group 3-4:
Table 8, Table 9, Table 13Group 5, Configuration 1:
Table 1, Table 5, Table 14Group 5, Configuration 2:
Table 1, Table 5, Table 15Group 6:
Table 1, Table 6, Table 15Group 7-8:
Table 1, Table 6, Table 16Group 9:
Table 2, Table 6, Table 16Group 10:
Table 2, Table 6, Table 15Group 11:
Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:
Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 2,100 flight cycles after the Revision 1 date of Requirements Bulletin 757- 57A0073 RB Before 6,000 total flight cycles ACTION 1: Do a general visual inspection of the diagonal brace and diagonal brace fittings for any crack.
All Airplanes -Within 3,000 flight cycles after the effective date of AD 2018-16-05 ACTION 2: Do inspections for loose fasteners, skin cracks and shim migrations.
-Before further flightContact The Boeing Company for repair instructions and do the repair.
CONDITION 1: ANY
CRACK FOUND IN DIAG-
ONAL BRACE OR DIAGO- NAL BRACE FITTINGS(a) 2,100 flight cycles-Repeat general visual inspection of the diagonal brace and diagonal brace fittings for any crack.
CONDITION 2: NO
CRACK FOUND IN DIAG-
ONAL BRACE OR DIAGO- NAL BRACE FITTINGS(a) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 9 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:
Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightCONDITION 3 (ACTION
1): Install the Upper Link and Upper Link Pins if removed.
CONDITION 3: NO SHIM
MIGRATION, NO SKIN
CRACK AND NO LOOSE FASTENER.
3,000 flight cycles-CONDITION 3 (ACTION
2): Repeat inspections for loose fasteners, skin cracks and shim migrations.
-Before further flightDo open-hole HFEC inspection of fastener holes 1-10 for cracks.
CONDITION 4: ANY
LOOSE FASTENER
FOUND ON FASTENERS 1-10 (a) -Before further flightDo open-hole HFEC inspection on the loose bolt hole(s) for cracks.
CONDITION 5: ANY
LOOSE FASTENER
FOUND ON FASTENERS 11-18 (a) -Before further flightContact The Boeing Company for repair instructions and do the repair.
CONDITION 6: MAJOR
SHIM MIGRATION FOUND (a) -Before further flightOPTION 1: Contact The Boeing Company for repair instructions and do the repair.
CONDITION 7: ANY
CRACK FOUND IN THE DRAG FITTINGS (a) -Before further flightOPTION 2 (ACTION 1):
Replace any cracked drag fitting with a new part.
-Before further flightOPTION 2 (ACTION 2):
Install the Upper Link and Upper Link Pins if removed.
3,000 flight cycles-OPTION 2 (ACTION 3):
Repeat inspections for loose fasteners, skin cracks and shim migrations.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 10 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:
Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair.
CONDITION 8: ANY
CRACK FOUND IN SKIN
(a) -Before further flightCONDITION 9 (ACTION
1): Install new or serviceable bolts, new or kept washers, and new nuts for fastener holes where fasteners were removed.
CONDITION 9: NO
CRACK FOUND IN SKIN
AND DRAG FITTINGS
DURING OPEN-HOLE HFEC INSPECTION (a) -Before further flightCONDITION 9 (ACTION
2): Install the Upper Link and Upper Link Pins if removed.
3,000 flight cycles-CONDITION 9 (ACTION
3): Repeat inspections for loose fasteners, skin cracks and shim migrations.
-Before further flightDo a torque check of fasteners on the affected shim(s).
CONDITION 10: MINOR
SHIM MIGRATION
FOUND IN SKIN PANEL SHIM (a) -Before further flightCONDITION 10.1 (AC- TION 1): Trim affected shim to the edge of the fitting. Apply chemical conversion coating on the shim and fillet seal the edge of the drag fitting.
CONDITION 10.1: ALL
BOLTS PASSED THE
TORQUE CHECK -Before further flightCONDITION 10.1 (AC- TION 2): Install the Upper Link and Upper Link Pins if removed.
3,000 flight cycles-CONDITION 10.1 (AC- TION 3): Repeat inspections for loose fasteners, skin cracks and shim migrations.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 11 of 103 REQUIREMENTS BULLETIN 757-57A0073
ALERTALERT
Group 1, Configuration 2; Group 2-4; Group 5, Configuration 2; Group 6-9:
Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair.
CONDITION 10.2: ANY
BOLT FAILED THE
TORQUE CHECK -Before further flightCONDITION 11 (ACTION
1): Trim affected shim to the edge of the fitting.
Apply chemical conversion coating on the shim and fillet seal the edge of the drag fitting.
CONDITION 11: MINOR
SHIM MIGRATION FOUND IN SPAR SHIM (a) -Before further flightCONDITION 11 (ACTION
2): Install the Upper Link and Upper Link Pins if removed.
3,000 flight cycles-CONDITION 11 (ACTION
3): Repeat inspections for loose fasteners, skin cracks and shim migrations.
(a) More than one CONDITION can be applicable on each airplane.
Group 10-11:
Table 2: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and diagonal brace fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 2,100 flight cycles after the Revision 1 date of Requirements Bulletin 757- 57A0073 RB Before 6,000 total flight cycles ACTION 1: Do a general visual inspection of the diagonal brace and diagonal brace fittings for any crack.
All airplanes -Within 3,000 flight cycles after the effective date of AD 2018-16-05 ACTION 2: Do inspections for loose fasteners, skin cracks and shim migrations.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 14, 2017 757-57A0073 RBRevision 1: August 01, 2019 12 of 103 REQUIREMENTS BULLETIN 757-57A0073