Copy · RB 757-57A0073-R00--(2) · 71 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0110; AD 2018-16-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'e67b742b3c43606c761633d2e48595a662cb205aaa36b25ce3d8543672480c8b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2017 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: July 14, 2017 757-57A0073 RB 1 of 71

5.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 2 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

BLANK PAGE

Table of Contents

1 . E F F E C T I V I T Y5

A. Airplanes5

B . S p a r e s A f f e c t e d6

2. CONCURRENT REQUIREMENTS6

3 . C O M P L I A N C E6

4. APPROVAL ................................................ 1 6

5. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 7 A. General Information ......................................... 1 7 B. Work Instructions ........................................... 1 9 FIGURE 1: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 2 6 FIGURE 2: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER INSPECTION .................................................. 2 8 FIGURE 3: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM MIGRATION INSPECTION .................................................. 3 0 FIGURE 4: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - SHIM MIGRATION INSPECTION .................................................. 3 4 FIGURE 5: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 3 8 FIGURE 6: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - FASTENER 1-10 OPEN-HOLE HFEC INSPECTION ...................................... 4 0 FIGURE 7: LEFT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 4 2 FIGURE 8: RIGHT WING - DRAG FITTINGS AND WING UPPER SKIN - LOOSE FASTENER 11-18 OPEN-HOLE HFEC INSPECTION [Group 1-9] ........................ 4 4 FIGURE 9: LEFT WING- DIAGONAL BRACE AND FITTINGS - GENERAL VISUAL INSPECTION FOR C R A C K S............................................ 4 6 FIGURE 10: RIGHT WING- DIAGONAL BRACE AND FITTINGS - GENERAL VISUAL INSPECTION FOR C R A C K S............................................ 4 9 FIGURE 11: LEFT WING - WING UPPER SKIN - DETAILED INSPECTION FOR CRACKS ...... 5 2 FIGURE 12: RIGHT WING - WING UPPER SKIN - DETAILED INSPECTION FOR CRACKS ...... 5 4 FIGURE 13: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 56 FIGURE 14: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 58 FIGURE 15: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 1-9] . 60 FIGURE 16: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 1-9] .................................................. 6 2 FIGURE 17: LEFT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] . 64 FIGURE 18: RIGHT WING - DRAG FITTINGS - INBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 6 6 FIGURE 19: LEFT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 6 8 FIGURE 20: RIGHT WING - DRAG FITTINGS - OUTBOARD SHIM BOLT TORQUE CHECK [Group 10-11] .................................................. 7 0 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 3 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 4 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

BLANK PAGE

Commercial Airplanes 757 Requirements Bulletin ALERT Number: 757-57A0073 RB Original Issue: July 14, 2017 ATA System: 5720 SUBJECT: WINGS - Outer Wing - Upper Skin, Drag Fittings and Diagonal Brace Fastener and Shim Inspections

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING

PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. EFFECTIVITY A. Airplanes This bulletin is applicable to all 757-200/-200CB/-200PF/-300 Airplanes, line numbers 1-1050 in 11 Groups.

DESCRIPTIONCONFIGURATIONGROUP 757-200/-200CB/-200PF Airplanes, Line Numbers 1-735 with Rolls-Royce engines and with cold work -1 Airplanes that have not accomplished SB 757-54-0035.1 Airplanes that have accomplished SB 757-54-0035.2 757-200/-200PF Airplanes, Line Numbers 736-802 with Rolls-Royce engines and with cold work.

-2 757-200 Airplanes, Line Numbers 803-1009 with Rolls-Royce engines and without cold work -3 757-200 Airplanes, Line Numbers 1010-1050 with Rolls-Royce engines and without cold work -4 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 5 of 71

DESCRIPTIONCONFIGURATIONGROUP 757-200/-200PF Airplanes, Line Numbers 1-735 with Pratt and Whitney engines and with cold work -5 Airplanes that have not accomplished SB 757-54-0034.1 Airplanes that have accomplished SB 757-54-0034.2 757-200 Airplanes, Line Numbers 736-802 with Pratt and Whitney engines and with cold work -6 757-200 Airplanes, Line Numbers 803-1009 with Pratt and Whitney engines and without cold work -7 757-200 Airplanes, Line Numbers 1010-1050 with Pratt and Whitney engines and without cold work -8 757-300 Airplanes, Line Numbers 804-855 with Rolls-Royce engines and shear-head bolts in the drag fitting and without cold work -9 757-300 Airplanes, Line Numbers 906-1043 with Rolls-Royce engines and tension-head bolts in the drag fitting and without cold work -10 757-300 Airplanes, Line Numbers 906-1043 with Pratt and Whitney engines and tension-head bolts in the drag fitting and without cold work -11 B. Spares Affected None.

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to the requirements bulletin. The Airworthiness Directive will make the compliance tasks and times given in the requirements bulletin mandatory.

Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 8, in accordance with the Accomplishment Instructions.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 6 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Each Group has two tables that give the compliance for the affected airplanes. The following table shows which compliance tables apply to each Group.

Applicable TablesGroups Table 1, Table 7Group 1 Configuration 1 Table 1, Table 3Group 1 Configuration 2, Group 2 Table 1, Table 4Groups 3, 4 Table 1, Table 8Group 5 Configuration 1 Table 1, Table 5Group 5 Configuration 2, Group 6 Table 1, Table 6Groups 7, 8, 9 Table 2, Table 6Groups 10, 11 Group 1-9:

Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 3,000 flight cycles after the original issue date of the requirements bulletin Before 6,000 total flight cycles Do inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks All Airplanes -Before further flightACTION 1: Install the Upper Link and Upper Link Pins if removed.

CONDITION 1: NO SHIM

MIGRATION, NO SKIN

CRACK, NO LOOSE FAS-

TENER, AND NO CRACK

IN DIAGONAL BRACE

AND FITTINGS FOUND 3000 flight cycles-ACTION 2: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks -Before further flightDo open-hole HFEC inspection of fastener holes 1-10 for cracks CONDITION 2: ANY

LOOSE FASTENER

FOUND ON FASTENERS 1-10 (a) -Before further flightDo open-hole HFEC inspection on the loose bolt hole(s) for cracks CONDITION 3: ANY

LOOSE FASTENER

FOUND ON FASTENERS 11-18 (a) -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 4: MAJOR

SHIM MIGRATION FOUND (a) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 7 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 1-9:

Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 5: ANY

CRACK FOUND IN SKIN OR DRAG FITTINGS (a) -Before further flightACTION 1: Install new or serviceable bolts, new or kept washers, and new nuts CONDITION 6: NO

CRACK FOUND IN SKIN

AND DRAG FITTINGS

DURING OPEN-HOLE HFEC INSPECTION (a) -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

3000 flight cycles-ACTION 3: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 7: ANY

CRACK FOUND IN DIAG-

ONAL BRACE OR FIT- TINGS (a) -Before further flightDo a torque check of fasteners on the affected shim(s) CONDITION 8: MINOR

SHIM MIGRATION

FOUND IN SKIN PANEL SHIM (a) -Before further flightACTION 1: Trim affected shim to the edge of the fitting. Apply chemical conversion coating on the shim and fillet seal the edge of the drag fitting.

CONDITION 8.1: ALL

BOLTS PASSED THE

TORQUE CHECK -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

3000 flight cycles-ACTION 3: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 8 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 1-9:

Table 1: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 8.2: ANY

BOLT FAILED THE

TORQUE CHECK -Before further flightACTION 1: Trim affected shim to the edge of the fitting. Apply chemical conversion coating on the shim and fillet seal the edge of the drag fitting.

CONDITION 9: MINOR

SHIM MIGRATION FOUND IN SPAR SHIM (a) -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

3000 flight cycles-ACTION 3: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks

(a) More than one CONDITION can be applicable on each airplane.

Group 10-11:

Table 2: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 3,000 flight cycles after the original issue date of the requirements bulletin Before 6,000 total flight cycles Do inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks All airplanes -Before further flightACTION 1: Install the Upper Link and Upper Link Pins if removed.

CONDITION 1: NO SHIM

MIGRATION, NO SKIN

CRACK, NO LOOSE FAS-

TENER, AND NO CRACK

IN DIAGONAL BRACE

AND FITTINGS FOUND 3000 flight cycles-ACTION 2: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 9 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 10-11:

Table 2: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 4: MAJOR

SHIM MIGRATION FOUND (a) -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 5: ANY

CRACK FOUND IN SKIN OR DRAG FITTINGS (a) -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 7: ANY

CRACK FOUND IN DIAG-

ONAL BRACE OR FIT- TINGS (a) -Before further flightDo a torque check of fasteners on the affected shim(s) CONDITION 8: MINOR

SHIM MIGRATION

FOUND IN SKIN PANEL SHIM (a) -Before further flightACTION 1: Trim affected shim to the edge of the fitting. Apply chemical conversion coating and fillet seal the edge of the drag fitting CONDITION 8.1: ALL

BOLTS PASSED THE

TORQUE CHECK -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

3000 flight cycles-ACTION 3: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 8.2: ANY

BOLT FAILED THE

TORQUE CHECK Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 10 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 10-11:

Table 2: Inspection for loose fasteners, skin cracking and shim migration at the upper link drag fittings and for cracks in the diagonal brace and fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightACTION 1: Trim affected shim to the edge of the fitting. Apply chemical conversion coating and fillet seal the edge of the drag fitting CONDITION 9: MINOR

SHIM MIGRATION FOUND IN SPAR SHIM (a) -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

3000 flight cycles-ACTION 3: Repeat inspections for loose fasteners, skin cracks, shim migrations, and diagonal brace and fittings cracks -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 10: ANY

LOOSE FASTENER FOUND (a)

(a) More than one CONDITION can be applicable on each airplane.

Group 1, Configuration 2; Group 2:

Table 3: Inspect for cracks in the wing skin and drag fittings at the upper link drag fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 3,000 flight cycles after the original issue date of the requirements bulletin Before 23,000 total flight cycles Do open-hole HFEC inspection of fastener holes 1-10 for cracks (b) All airplanes -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 5: ANY

CRACK FOUND IN SKIN

OR DRAG FITTINGS Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 11 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Group 1, Configuration 2; Group 2:

Table 3: Inspect for cracks in the wing skin and drag fittings at the upper link drag fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flightACTION 1: Install new or serviceable bolts, new or kept washers, and new nuts CONDITION 6: NO

CRACK FOUND IN SKIN

AND DRAG FITTINGS

DURING OPEN-HOLE HFEC INSPECTION -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

12,000 flight cycles

(a) -ACTION 3: Repeat openhole HFEC inspection of fastener holes 1-10

(a) Accomplishment of an open-hole HFEC inspection of fastener holes 1-10 as a result of CONDITION 2 meets the requirements of this action.

(b) When this action occurs at the same time as a loose fastener inspection from Table 1, the loose fastener inspection in Table 1 must be done first.

Group 3-4:

Table 4: Inspect for cracks in the wing skin and drag fittings at the upper link drag fittings Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 3,000 flight cycles after the original issue date of the requirements bulletin Before 12,000 total flight cycles Do open-hole HFEC inspection of fastener holes 1-10 for cracks (b) All airplanes -Before further flightContact The Boeing Company for repair instructions and do the repair CONDITION 5: ANY

CRACK FOUND IN SKIN

OR DRAG FITTINGS -Before further flightACTION 1: Install new or serviceable bolts, new or kept washers, and new nuts CONDITION 6: NO

CRACK FOUND IN SKIN

AND DRAG FITTINGS

DURING OPEN-HOLE HFEC INSPECTION -Before further flightACTION 2: Install the Upper Link and Upper Link Pins if removed.

12,000 flight cycles

(a) -ACTION 3: Repeat openhole HFEC inspection of fastener holes 1-10 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: July 14, 2017 757-57A0073 RB 12 of 71 REQUIREMENTS BULLETIN 757-57A0073

ALERTALERT

Pages 13–24 of 71