Copy · U.S. DOT/FAA - SB-767-27A0227-00 · 78 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0869; AD 2014-09-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '573c4ad1bff9a1dd6f635484e380c2da5852a38a04afa4f74599935cbcdbd91b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 767 Service Bulletin ALERT Number: 767-27A0227 Original Issue: February 12, 2013 ATA System: 2751 SUBJECT: FLIGHT CONTROLS - Flaps - Outboard Flap Actuator Crank Arm Mechanism - Flap Positions 1, 2, 7 and 8 Bearing Inspection/Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2013 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management Company.

Original Issue: February 12, 2013 767-27A0227 1 of 78

4.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 2 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

BLANK PAGE

Table of Contents

Summary5

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 3 B. Concurrent Requirements ...................................... 1 3 C. Reason ................................................ 1 4 D. Description .............................................. 1 5 E. Compliance .............................................. 1 6 F. Approval ............................................... 2 6 G. Manpower .............................................. 2 7 H. Weight and Balance Changes .................................... 2 9 I. Electrical Load Data ......................................... 2 9 J. References .............................................. 2 9

1. Existing Data: ......................................... 2 9

2. Data Supplied with this Service Bulletin: ........................... 2 9

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 9 K. Publications Affected ........................................ 3 0 L. Interchangeability and Intermixability of Parts ........................... 3 0 M. Software Accomplishment Summary ................................ 3 0

2. MATERIAL INFORMATION ........................................ 3 1 A. Material - Price and Availability ................................... 3 1 B. Industry Support Information .................................... 3 1 C. Parts Necessary for Each Airplane ................................. 3 1

1. Kits/Parts ............................................ 3 1

2. Parts and Materials Supplied by the Operator ........................ 3 2

3. Parts Modified and Reidentified ................................ 3 3

4. Parts Removed and Not Replaced .............................. 3 4 D. Parts Necessary to Change Spares ................................. 3 4 E. Special Tooling - Price and Availability ............................... 3 5 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 5

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 7 A. GENERAL INFORMATION ..................................... 3 7 B. WORK INSTRUCTIONS ....................................... 3 8 FIGURE 1: INSPECT THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, AND 8, OUTBOARD SIDE [Group 1-3, Configuration 2] ......................................... 5 2 FIGURE 2: INSPECT THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, AND 8, INBOARD SIDE [Group 1-3, Configuration 2 ] ................................................ 5 5 FIGURE 3: RESTORE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, AND 8, OUTBOARD SIDE [Group 1-3, Configuration 2] ......................................... 5 8 FIGURE 4: RESTORE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, AND 8, INBOARD SIDE [Group 1-3, Configuration 2 ] ................................................ 6 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 3 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

FIGURE 5: REPLACE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITION 1 [Group 1-3, Configuration 2] ............ 6 3 FIGURE 6: REPLACE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITION 2 [Group 1-3, Configuration 2] ............ 6 6 FIGURE 7: REPLACE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITION 7 [Group 1-3, Configuration 2] ............ 6 9 FIGURE 8: REPLACE THE TRAILING EDGE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITION 8 [Group 1-3, Configuration 2] ............ 7 2 FIGURE 9: RE-IDENTIFY THE TRAILING EDGE (TE) FLAP SUPPORT RIB ASSEMBLY FOR APPLICABLE FLAP POSITIONS WITH CORRECT NEW PART NUMBERS [Group 1, 3, Configuration 1] . 75 APPENDIX A: BEARING DAMAGE DEFINITIONS AND SUGGESTED WORKSHEET TO RECORD THE CONDITION OF THE REMOVED BEARINGS [Group 1-3, Configuration 2] ........ 7 6 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 4 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

Commercial Airplanes 767 Service Bulletin ALERT SummaryNumber: 767-27A0227Original Issue: February 12, 2013 ATA System: 2751 SUBJECT: FLIGHT CONTROLS - Flaps - Outboard Flap Actuator Crank Arm Mechanism - Flap Positions 1, 2, 7 and 8 Bearing Inspection/Replacement

THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of this service bulletin will replace the Trailing Edge (TE) Flap support bearings without a roller retention feature at the TE Flap support rib assembly in Flap Positions 1, 2, 7, and 8 with new bearings with a roller retention feature. The TE Flap support bearings are integral components of the TE Flap support rib assemblies. The TE Flap rotary actuators and position transmitters are attached to the TE support rib assemblies along the rear spar. Not replacing the TE Flap support bearings can, in the event of an undetected bearing failure, lead to damage to the TE rotary actuators and other TE Flap support rib parts, which could result in a dual Flap drive system disconnect in both TE Flap rotary actuators, and a possible Flaps blowback with loss of controllability of the airplane.

There have been several cases of varying degrees of TE Flap support bearings damage at the TE Flap support rib assemblies in Flap Positions 1, 2, 4, 5, 7, and 8. An operator reported "TE FLAP ASYM" and "TE SHUT DOWN" messages at Flap 5 during a landing approach. Bearing damage was found at the Outboard E Flap support rib assembly in Flap Positions 1, 2, 7, and 8, and at the Inboard TE Flap support rib assembly in Positions 4 and 5. The inspection of a second airplane revealed similar TE Flap support bearing damage, but no EICAS messages were experienced in that case. A third airplane was inspected by another operator, and similar damage to the TE Flap support bearings was found, but no EICAS messages were experienced in that case either.

Another operator found a broken position transmitter gearbox on a fourth airplane after receiving a Flap skew message. This airplane also had TE Flap support bearing damage in the TE Flap support rib assembly at various TE Flap Positions. Bearing damage in the TE Flaps support rib assembly is caused by the use of dead-blow mallets during the installation of the shaft on the TE Flap support rib assembly when TE Flap support bearings without a roller retention feature are installed. This method of installation may compromise bearings without a roller retention feature. The TE Flap support bearings in TE Flap Positions 3 and 6 are not affected.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 5 of 78

This service bulletin replaces Boeing service bulletin 767-27A0222, Original Issue. More work is necessary for Group 1, Configuration 1 airplanes (airplanes that accomplished the terminating action given in Boeing service bulletin 767-27A0222, Original Issue) to maintain part number configuration control of the flap support rib assemblies. For these airplanes, the new part numbers for TE Flap support rib assembly in Flap Positions 1 and 8 were incorrect in 767-27A0222, Original Issue. The TE Flap support rib assembly part numbers should be changed to the correct part number on the affected airplanes in this group/configuration. No more work is necessary for Group 2, Configuration 1 airplanes. For this airplane, the new part numbers for TE Flap support rib assembly in Flap Positions 1 and 8 were correct in 767-27A0222, Original Issue.

This service bulletin does not provide instructions to inspect/replace the TE Flap support bearings and the rotary actuators at Flap Positions 4 and 5. The TE Flap support bearings and TE rotary actuators at these Flap Positions are covered by service bulletin 767-27-0223. The TE Flap support bearings and TE rotary actuators at Flap Positions 3 and 6 are not affected by the condition addressed in this service bulletin Boeing Service Related Problem (SRP) 767-SRP-57-0235 and SRP 767-SRP-57-0255 are related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Group 1, 3, Configuration 1:

RE-IDENTIFY THE TRAILING EDGE (TE) FLAP SUPPORT RIB ASSEMBLY FOR APPLICABLE FLAP

POSITIONS WITH CORRECT NEW PART NUMBERS

1. Do PART 3 to reidentify the TE Flap support rib assembly at the applicable Flap Positions with the correct new part numbers.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 6 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

Group 2, Configuration 1:

1. No action required.

Group 1-3, Configuration 2:

INSPECT THE TE FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, AND 8:

1. Do PART 1A to do a General Visual Inspection (GVI) of the TE Flap support bearings at the TE Flap support rib assembly in Flap Positions 1, 2, 7, and 8 to identify the type of bearing installed.

a. PART 1A, STEP 7, CONDITION 1: Two bearings with a roller retention feature are installed at the TE Flap support rib assembly in Flap Positions 1, 2, 7, and 8.

– No bearing replacement is required. Put the airplane back to a serviceable condition in accordance with Accomplishment Instructions PART 1B.

a. PART 1A, STEP 7, CONDITION 2: At least one bearing without a roller retention feature is installed at the TE Flap support rib assembly in Flap Position1, 2, 7, or 8.

– Replace the two bearings at each applicable TE Flap support rib in accordance with Accomplishment Instructions PART 2.

– Do a General Visual Inspection (GVI) of each pair of bearings removed in accordance with Accomplishment Instructions PART 2, Step 1.d.

Group 1-3, Configuration 2:

REPLACE THE TRAILING EDGE (TE) FLAP SUPPORT BEARINGS AT THE TE FLAP SUPPORT RIB ASSEMBLY IN FLAP POSITIONS 1, 2, 7, or 8:

1. Do PART 2 to replace the applicable TE Flap support bearings at the TE Flap support rib assembly in Flap Positions 1, 2, 7, or 8 after bearing the inspection in PART 1A if one or more bearings, at any of the applicable TE Flap Positions, do not have a roller retention feature.

2. Do a GVI of the removed TE Flap support bearings and record the damage / type bearing combination.

Use the data to find if the TE rotary actuators at Flap Positions 1, 2, 7, or 8 are serviceable or if they need to be overhauled or replaced.

a. PART 2, STEP 1.f, 2.f, 3.f, or 4.f., CONDITION 1: Both TE Flap support bearings at TE Flap support rib assembly in Flap Position 1 have at least one face each that meets the definitions of good or slightly damaged bearing face.

– PART 2, Step 1.f, CONDITION 1, Step 1: The TE rotary actuator is acceptable and may be used as-is in the applicable Flap Position(s).

b. PART 2, STEP 1.f, 2.f, 3.f, or 4.f., CONDITION 2: Only one TE Flap support bearing at the TE Flap support rib assembly in Flap Position 1 has at least one face that meets the definition of good or slightly damaged bearing face. The other bearing at the same TE Flap support rib assembly has faces that meet the definitions of moderately damaged or fractured bearing face.

– PART 2, Step 1.f, CONDITION 2, Step 1: Overhaul or replace the TE rotary actuator at the TE Flap support rib assembly in the applicable Flap Position(s).

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 7 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

c. PART 2, STEP 1.f, 2.f, 3.f, or 4.f., CONDITION 3: Both bearings at the TE Flap support rib assembly in Flap Position 1 have all faces that meet the definitions of moderately damaged or fractured bearing face.

– PART 2, Step 1.f, CONDITION 3, Step 1: Replace the TE rotary actuator at the TE Flap support rib assembly in the applicable Flap Position(s).

Group 1-3, Configuration 2:

FUNCTIONAL TEST AFTER BEARING REPLACEMENT:

1. Do the functional test after the TE Flap rib support bearings have been replaced at Flap Position 1, 2, 7 or 8.

EFFECTIVITY 767-200/-300/-300F/-400ER Airplanes that have bearings without a roller retention feature installed at the Trailing Edge (TE) Flap support ribs. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of July 15, 2009. Please refer to Paragraph

2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 8 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

Page 9OCROpen in PDF

BOEING SERVICE BULLETIN 767-27A0227

ALERT ALERT WING STA 798 POSITION 1

INSPECT THE FLAP BEARINGS

OUTBOARD SIDE AND INBOARD SIDE

INBOARD

REPLACE BEARINGS IF SIDE

NECESSARY IN POSITIONS 1 AND 8.

REPLACE BEARINGS IN POSITION 1, 2, 7, AND 8 TO

TERMINATE INSPECTION FWD SIDE TRAILING EDGE (TE) FLAP SUPPORT RIB POSITION 1 SHOWN TE FLAP SUPPORT RIB POSITION 8 OPPOSITE POSITIONS 2 AND 7, SIMILAR Original Issue: February 12, 2013 Export Controlled ECCN: 9E991 - BOEING 767-27A0227 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 78

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 10 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

BLANK PAGE

Commercial Airplanes 767 Service Bulletin ALERT Number: 767-27A0227 Original Issue: February 12, 2013 ATA System: 2751 SUBJECT: FLIGHT CONTROLS - Flaps - Outboard Flap Actuator Crank Arm Mechanism - Flap Positions 1, 2, 7 and 8 Bearing Inspection/Replacement

THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH

1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is for the airplane(s) shown below.

Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP 767-200/300/300F/400ER Airplanes Line Number 949 - 981-1 Airplanes that accomplished the terminating action in Boeing service bulletin 767-27A0222, Original Issue, but need to repart mark the TE Flap support rib assembly in Flap Positions 1 and 8 1 Airplanes that did not accomplish the terminating action in Boeing service bulletin 767-27A0222, Original Issue 2 767-300F Airplane Line Number 982-2 Airplanes that accomplished the terminating action in Boeing service bulletin 767-27A0222, Original Issue 1 Airplanes that did not accomplished the terminating action in Boeing service bulletin 767-27A0222, Original Issue 2 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 11 of 78

DESCRIPTIONCONFIGURATIONGROUP 767-300/300F/400ER Airplanes Line Number 740-810-3 Airplanes that replaced the Trailing Edge Flap support bearings with bearings with a retention feature, but need to repart mark the TE Flap support rib assembly in Flap Positions 1, 2, 7 and 8 1 Airplanes that have not inspected/replaced the Trailing Edge Flap support bearings with bearings with a retention feature 2 Airplane Models:

767-200, 767-300, 767-300F, 767-400ER GroupVariable Number 3VQ001 - VQ009 3VQ071 - VQ073 1VQ111 1VR089 1VR108 - VR109 3VR207 - VR209 3VR256 - VR257 1VR266 3VR422 3VR441 3VR472 3VS055 - VS056 3VS076 - VS078 3VS095 - VS102 3VS112 - VS113 3VS137 3VS201 - VS203 3VS208 3VS216 - VS217 3VS270 - VS274 3VS291 3VS302 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 12, 2013 767-27A0227 12 of 78 BOEING SERVICE BULLETIN 767-27A0227

ALERTALERT

Pages 13–24 of 78