Copy · 767-57A0148_RB_original_Part1 · 294 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0618; AD 2026-05-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5a38c11d3702fd502001a8112e6e00fbcc063a6e04a843331fc023a1f3abf2cf'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 767 Requirements Bulletin ALERT Number: 767-57A0148 RB Original Issue: October 10, 2024 ATA System: 5710 5350 SUBJECT: WINGS - Center Wing - Lower Underwing Longeron Fitting Forward Fastener Holes Inspection EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.

9E991ECCN:

Copyright © 2024 The Boeing Company Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: October 10, 2024 767-57A0148 RB 1 of 416

4.0

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 2 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

BLANK PAGE

Table of Contents

1. EFFECTIVITY5

A. Airplanes5

B. Spares Affected11

2. CONCURRENT REQUIREMENTS12

3. COMPLIANCE12

4. APPROVAL49

5. ACCOMPLISHMENT INSTRUCTIONS51

A. General Information51

B. Work Instructions52

FIGURE 3: LEFT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENER HOLES -

INSPECTION265

FIGURE 4: RIGHT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENER HOLES

- INSPECTION267

FIGURE 5: LEFT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 1, 3-5]269

FIGURE 6: RIGHT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 1, 3-5]273

FIGURE 7: LEFT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 4, 6-7]277

FIGURE 8: RIGHT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 4, 6-7]281

FIGURE 9: LEFT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 2]285

FIGURE 10: RIGHT SIDE UNDERWING LONGERON FITTING - TENSION BOLT HOLE AND FRONT SPAR

LOWER CHORD - INSPECTION [Group 2]289

FIGURE 15: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U7 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 1, 3]293

FIGURE 16: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U8 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 1, 3]301

FIGURE 17: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U13 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 1, 3]309

FIGURE 18: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U14 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 1, 3]317

FIGURE 19: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U7 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 4, 6-7]325

FIGURE 20: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U8 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 4, 6-7]334

FIGURE 21: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U13 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 4, 6-7]343

FIGURE 22: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U14 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 4, 6-7]351

FIGURE 23: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U9 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 2]359

FIGURE 24: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U10 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 2]367

FIGURE 25: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U15 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 2]375

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 3 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

FIGURE 26: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U16 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 2]383

FIGURE 27: LEFT SIDE UNDERWING LONGERON FITTING P/N 111T4020U13 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 5]391

FIGURE 28: RIGHT SIDE UNDERWING LONGERON FITTING P/N 111T4020U14 - TENSION BOLT AND

INTERNAL BATHTUB FITTING - INSTALLATION [Group 5]399

FIGURE 33: LEFT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENERS -

INSTALLATION407

FIGURE 34: RIGHT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENERS -

INSTALLATION410

FIGURE 35: LEFT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENER HOLES -

CRACK REPAIR413

FIGURE 36: RIGHT SIDE UNDERWING LONGERON FITTING - FORWARD LOWER FASTENER HOLES

- CRACK REPAIR415

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 4 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

Commercial Airplanes 767 Requirements Bulletin ALERT Number: 767-57A0148 RB Original Issue: October 10, 2024 ATA System: 5710 5350 SUBJECT: WINGS - Center Wing - Lower Underwing Longeron Fitting Forward Fastener Holes Inspection

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING

PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. Effectivity A. Airplanes This bulletin is applicable to 767-200, 767-300, 767-300F, 767-400ER Airplane(s), line number(s) 1-717, 719-922, 924-1064, 1068, 1070-1090, 1093-1097, 1099, 1101, 1103, 1105-1106, 1108, 1110, 1112, 1115, 1118, 1121, 1123, 1125, 1127, 1130, 1133, 1136, 1138, 1140-1142, 1144, 1146, 1148, 1150, 1152-1153, 1155, 1157, 1159, 1161, 1163, 1165, 1167, 1169, 1171, 1173, 1175, 1177, 1179-1180, 1182-1183, 1185-1187, 1189-1191, 1193-1195, 1197-1199, 1201, 1203-1204, 1206, 1208-1209, 1211-1212, 1214-1215, 1217-1218, 1220-1222, 1224-1225, 1227-1229, 1231-1233, 1235, 1237, 1239-1240, 1242, 1244-1245, 1247, 1249, 1251, 1253, 1255-1256, 1258, 1260, 1262-1263, 1265-1266, 1268, 1270, 1272, 1274, 1276, 1278-1279, 1281, 1283, 1285, 1287, 1289, 1291-1292, 1294, 1296, 1298, 1300, 1302, 1304-1305, 1307, 1309, 1311, 1313, 1315, 1317-1318, 1320, 1322-1323, 1325, 1327, 1329-1330, 1332, 1334, 1336, 1338, 1340, 1342-1343, 1345, 1347, 1349, 1351, 1353, 1355-1356, 1364, 1366, 1368-1369, 1371, 1373-1375, 1377, 1379, 1381-9999 in 7 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

The Variable Numbers and Group Information for the applicable airplanes is given below.

NOTE: The Variable Number table below includes affected airplanes available as of the issue date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com after the issue date of this bulletin will be shown using the Maintenance Performance Toolbox EFFECTIVITY search function result.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 5 of 416

DESCRIPTIONCONFIGURATIONGROUP 767-200/-300/-300F airplanes with production seal retainer up to line number 1063.

-1 Airplanes that have not replaced underwing longeron fittings.1 Airplanes that have replaced the left side and not the right side underwing longeron fitting.

2 Airplanes that have replaced the right side and not the left side underwing longeron fitting.

3 Airplanes that have replaced both the left side and right side underwing longeron fittings.

4 767-400ER airplanes up to line number 1063.-2 Airplanes that have not replaced underwing longeron fittings.1 Airplanes that have replaced the left side and not the right side underwing longeron fitting.

2 Airplanes that have replaced the right side and not the left side underwing longeron fitting.

3 Airplanes that have replaced both the left side and right side underwing longeron fittings.

4 767-200 airplanes without production seal retainer up to line number 1063.

-3 Airplanes that have not replaced underwing longeron fittings.1 Airplanes that have replaced the left side and not the right side underwing longeron fitting.

2 Airplanes that have replaced the right side and not the left side underwing longeron fitting.

3 Airplanes that have replaced both the left side and right side underwing longeron fittings.

4 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 6 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

DESCRIPTIONCONFIGURATIONGROUP 767-200 airplanes which are subject to post-production seal retainer incorporated by Service Bulletin 767-57-0026.

-4 Airplanes that have incorporated Service Bulletin 767-57-0026 and have not replaced underwing longeron fittings.

1 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have not replaced underwing longeron fittings.

2 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced the left side and not right side underwing longeron fitting.

3 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced the left side and not right side underwing longeron fitting.

4 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced the right side and not left side underwing longeron fitting.

5 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced the right side and not left side underwing longeron fitting.

6 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced both the left side and right side underwing longeron fittings.

7 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced both the left side and right side underwing longeron fittings.

8 767-200/-300/-300F airplanes line numbers 1064, 1068, 1070 and onwards. These airplanes have improved design underwing longeron fittings fillet radius details installed in production.

-5 Airplanes that have not replaced underwing longeron fittings.1 Airplanes that have replaced the left side and not the right side underwing longeron fitting.

2 Airplanes that have replaced the right side and not the left side underwing longeron fitting.

3 Airplanes that have replaced both the left side and right side underwing longeron fittings.

4 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 7 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

DESCRIPTIONCONFIGURATIONGROUP 767-200/-300 airplanes, without production seal retainer and that have the internal bathtub fitting tension bolt head located on the forward side of the joint.

-6 Airplanes that have not replaced underwing longeron fittings.1 Airplanes that have replaced the left side and not the right side underwing longeron fitting.

2 Airplanes that have replaced the right side and not the left side underwing longeron fitting.

3 Airplanes that have replaced both the left side and right side underwing longeron fittings.

4 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 8 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

DESCRIPTIONCONFIGURATIONGROUP 767-300 airplanes which are subject to post-production seal retainer incorporated by Service Bulletin 767-57-0026 and have the internal bathtub fitting tension bolt head located on the forward side of the joint.

-7 Airplanes that have incorporated Service Bulletin 767-57-0026 and have not replaced underwing longeron fittings.

1 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have not replaced underwing longeron fittings.

2 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced the left side and not right side underwing longeron fitting.

3 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced the left side and not right side underwing longeron fitting.

4 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced the right side and not left side underwing longeron fitting.

5 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced the right side and not left side underwing longeron fitting.

6 Airplanes that have incorporated Service Bulletin 767-57-0026 and have replaced both the left side and right side underwing longeron fittings.

7 Airplanes that have not incorporated Service Bulletin 767-57-0026 and have replaced both the left side and right side underwing longeron fittings.

8 Airplane Models:

767-200, 767-300, 767-300F, 767-400ER GroupVariable Number 6VA001 - VA020 6VA301 - VA315 6VA501 - VA530 6VA701 - VA719 GroupVariable Number 6VA801 - VA810 6VB001 - VB002 6VB051 - VB055 6VB101 - VB125 GroupVariable Number 6VB201 - VB202 6VB251 - VB253 6VB281 - VB284 6VB301 - VB302 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 9 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

GroupVariable Number 6VB321 - VB328 3VB329 - VB332 6VB371 - VB373 6VB401 3VB441 - VB444 6VE001 - VE003 6VE021 - VE023 6VE041 - VE043 6VE061 - VE069 6VE083 - VE086 6VE101 - VE104 6VE116 - VE117 3VE118 6VE121 - VE126 6VE141 - VE146 3VE147 - VE152 3VE171 - VE172 4VF001 - VF002 4VF041 1VF042 1VF051 1VF061 - VF062 1VF071 - VF072 1VF091 - VF093 1VF101 - VF102 1VF161 - VF162 1VF171 - VF172 1VF180 - VF184 1VF251 6VK001 - VK008 1VK009 - VK016 6VK021 - VK022 6VK031 - VK045 GroupVariable Number 1VK046 - VK056 6VK081 - VK091 1VK092 - VK113 1VK131 - VK133 1VK141 - VK148 1VK161 - VK164 1VK171 1VK181 1VK186 7VL001 - VL003 1VL004 - VL006 7VL011 1VL701 - VL703 1VL751 - VL755 1VL806 - VL807 1VL871 - VL873 1VL891 - VL900 1VL911 - VL914 1VL931 - VL932 1VL941 7VN001 - VN015 1VN016 - VN041 7VN051 - VN058 1VN059 - VN064 7VN081 - VN084 1VN085 - VN099 1VN111 - VN127 1VN130 - VN137 7VN151 1VN152 - VN158 1VN163 - VN168 7VN171 - VN172 1VN173 - VN174 GroupVariable Number 1VN191 - VN198 1VN211 - VN212 1VN221 - VN225 1VN231 - VN234 1VN241 - VN243 1VN251 - VN276 1VN291 - VN293 1VN301 - VN314 1VN371 - VN372 1VN376 1VN381 - VN388 1VN421 - VN427 1VN436 1VN471 - VN472 1VN491 - VN513 1VN531 - VN532 1VN536 - VN537 1VN541 - VN542 1VN546 - VN547 1VN551 1VN556 - VN557 1VN561 - VN562 1VN631 - VN638 1VN651 - VN658 1VN671 - VN672 1VN676 1VN681 - VN691 1VN731 - VN732 1VN751 - VN753 1VN791 - VN792 1VN811 - VN813 1VN921 - VN922 1VN931 - VN936 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 10 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

GroupVariable Number 1VN951 - VN953 1VN966 - VN972 2VQ001 - VQ021 2VQ071 - VQ086 2VQ111 1VR051 - VR060 1VR081 1VR084 1VR086 - VR089 1VR106 - VR109 1VR201 - VR211 1VR251 1VR256 - VR260 1VR266 - VR292 5VR293 - VR318 5VR321 - VR326 1VR401 1VR421 - VR423 1VR426 1VR441 1VR461 1VR471 - VR472 1VS051 - VS056 1VS061 1VS066 - VS070 1VS073 - VS078 1VS091 - VS104 1VS111 - VS113 1VS131 - VS133 1VS136 - VS137 1VS176 - VS177 GroupVariable Number 1VS186 - VS187 1VS196 - VS203 1VS206 - VS208 1VS211 1VS216 - VS217 1VS231 1VS246 - VS248 1VS261 - VS263 1VS266 - VS274 1VS291 - VS293 1VS301 - VS303 1VS306 - VS311 1VS316 1VS321 - VS324 1VS331 - VS333 1VS336 - VS337 1VS366 - VS367 1VS381 - VS382 1VS391 - VS392 1VS401 1VS426 - VS428 1VS466 - VS472 1VS486 1VS496 - VS497 1VS506 - VS507 1VS526 1VS546 - VS549 1VS701 - VS736 1VS751 - VS759 1VS821 - VS825 1VS841 - VS844 GroupVariable Number 1VS861 1VS881 - VS883 1VS891 1VS896 1VS901 - VS912 1VS916 1VS921 - VS928 1VS931 - VS933 1VS941 1VS951 - VS954 1VS961 - VS969 1VS971 - VS977 1VS981 - VS984 1VT001 - VT013 1VT021 1VT031 - VT032 5VT033 1VT501 1VT511 - VT513 1VT521 - VT523 1VT531 - VT533 1VT541 - VT546 1VT551 - VT552 1VT556 - VT558 5VT559 - VT699 5VT701 - VT705 5VT731 - VT735 5VT737 1VW701 - VW721 1VW851 -- B. Spares Affected None.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 11 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 767-57A0148 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 767-57A0148 RB mandatory.

Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 4, in accordance with Accomplishment Instructions.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.

Group 1, Configuration 1, 3; Group 2, Configuration 1, 3; Group 3, Configuration 1, 3; Group 4, Configuration 1-2, 5-6; Group 5, Configuration 1, 3; Group 6, Configuration 1, 3; Group 7, Configuration 1-2, 5- 6:

Table 1: Left Side Underwing Longeron Fitting Forward Lower Fastener Holes Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Within 6,000 flight-cycles or 14,000 flighthours after the Original Issue date of Requirements Bulletin 767-57A0148 RB, whichever occurs first.

Before 22,000 total flight-cycles or 80,000 total flight-hours, whichever occurs first.

Do an open hole High Frequency Eddy Current (HFEC) inspection of the fastener holes common to the underwing longeron fitting, upper drag splice angle, and lower drag splice angle for any crack.

All Airplanes.

-Before further flight.CONDITION 1 (ACTION 1):

Install fasteners.

CONDITION 1: NO CRACK FOUND.

12,000 flight-cycles or 28,000 flight-hours, whichever occurs first.

-CONDITION 1 (ACTION 2):

Repeat the open hole HFEC inspection of the fastener holes common to the underwing longeron fitting, upper drag splice angle, and lower drag splice angle for any crack.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 10, 2024 767-57A0148 RB 12 of 416 REQUIREMENTS BULLETIN 767-57A0148

ALERTALERT

Pages 13–24 of 294