© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-0429; AD 2024-01-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'de3d9f874b4cae5d8260796a50b21ec53cf39ce189038396082614f4c3a5753c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 777 Requirements Bulletin ALERT Number: 777-27A0124 RB Original Issue: October 27, 2021 ATA System: 2711 SUBJECT: FLIGHT CONTROLS - Aileron and Flaperon Control System - Force Limiter Assemblies Replacement

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING

PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. Effectivity A. Airplanes This bulletin is applicable to 777-200LR, 777-300ER, 777F Airplane(s), line number(s) 1531-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614, 1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650, 1652-1655, 1657-1658, 1660-1667, 1669, 1671, 1673, 1675-1676, 1678-1679, 1681, 1683-1684, 1686-1687, 1689-1707 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

The Variable Numbers and Group Information for the applicable airplanes is given below. An equivalent change is on subsequent production airplanes.

DESCRIPTIONCONFIGURATIONGROUP 777-200LR, 777-300ER, 777F airplanes with Force Limiter Assemblies P/N 253W1263-1 that have a higher than normal breakout force.

-1 Airplane Models:

777-200LR, 777-300ER, 777F Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 5 of 10

GroupVariable Number 1WD123 1WD156 1WE347 - WE350 1WE366 - WE368 1WE406 - WE411 1WE479 - WE484 1WE572 - WE573 1WE584 - WE587 1WE683 - WE689 1WE765 - WE772 1WE797 - WE798 1WE801 - WE806 GroupVariable Number 1WE827 - WE828 1WE831 - WE835 1WE851 - WE853 1WE856 - WE857 1WE861 - WE863 1WE866 - WE868 1WE871 1WF028 - WF029 1WF071 - WF074 1WF161 - WF165 1WF180 1WF201 GroupVariable Number 1WF209 - WF215 1WF222 - WF227 1WF231 - WF248 1WF256 - WF258 1WF261 - WF262 1WF266 - WF279 1WF281 - WF288 1WF296 1WF301 - WF304 1WF311 - WF313 1WF321 1WF336 - WF337 B. Spares Affected None.

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 777-27A0124 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 777-27A0124 RB mandatory.

Accomplish the required action(s), based on the applicable condition(s) in Table 1 , in accordance with Accomplishment Instructions.

Table 1: Force Limiter Assemblies Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Within 12 months after the Original Issue date of Requirements Bulletin 777-27A0124 RB or within 12 months after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness, whichever occurs later.

Replace the existing lower and upper Force Limiter assemblies part number 253W1263-1 with new lower and upper Force Limiter assemblies part number 253W1263-

3.

All airplanes Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 6 of 10 REQUIREMENTS BULLETIN 777-27A0124

ALERTALERT

4. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 7 of 10 REQUIREMENTS BULLETIN 777-27A0124

ALERTALERT

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 8 of 10 REQUIREMENTS BULLETIN 777-27A0124

ALERTALERT

BLANK PAGE

5. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD.

Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures.

For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition.

Figures not required for compliance are omitted from the RB.

2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.

3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.

4. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual (SRM) Chapter 51 – Torque Values:

— Values for structural fasteners are given in 777 Structural Repair Manual, Chapter 51.

— Values for airframe maintenance tasks are included in Chapter 20 of 777 Aircraft Maintenance Manual (AMM).

— Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).

— Values for engine maintenance tasks are included in Chapter 70 of 777 Aircraft Maintenance Manual (AMM).

— Non-standard torque values for maintenance tasks are included in the applicable installation step.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 9 of 10 REQUIREMENTS BULLETIN 777-27A0124

ALERTALERT

5. These work instructions refer to procedures included in other Boeing documents.

When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

6. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.

7. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.

8. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.

9. The instructions in Work Instructions and the figures can include operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools.

10. If the length of any fastener specified in this service bulletin does not meet installation standards given in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards given in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.

B. WORK INSTRUCTIONS Actions Required for Compliance

1. Requirements Table 1: Force Limiter Assemblies Replacement Refer to the listed procedures in SB 777-27A0124 Original Issue or later approved revisions as an accepted procedure.

Method of ComplianceActionCondition PART 1: OPEN ACCESS-Replace the existing lower and upper Force Limiter assemblies part number 253W1263-1 with new lower and upper Force Limiter assemblies part number 253W1263-3.

All airplanes PART 2: FORCE LIMITER

ASSEMBLIES REPLACE- MENT - PART 3: CLOSE ACCESS- Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 27, 2021 777-27A0124 RB 10 of 10 REQUIREMENTS BULLETIN 777-27A0124

ALERTALERT