Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c429e4890c5a7ef89310d9429e115196c91a3c9637687922c2c355f1a867af61' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c429e4890c5a7ef89310d9429e115196c91a3c9637687922c2c355f1a867af61' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 777 Requirements Bulletin ALERT Number: 777-29A0047 RB Original Issue: September 11, 2025 ATA System: 2911 SUBJECT: HYDRAULIC POWER - Hydraulic System - Alternating Current Motor Pump Inspection EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2025 The Boeing Company Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: September 11, 2025 777-29A0047 RB 1 of 11
3.0
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 2 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
BLANK PAGE
Table of Contents
1. EFFECTIVITY5
A. Airplanes5
B. Spares Affected7
2. CONCURRENT REQUIREMENTS7
3. COMPLIANCE8
4. APPROVAL8
5. ACCOMPLISHMENT INSTRUCTIONS9
A. General Information9
B. Work Instructions10
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 3 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 4 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
BLANK PAGE
Commercial Airplanes 777 Requirements Bulletin ALERT Number: 777-29A0047 RB Original Issue: September 11, 2025 ATA System: 2911 SUBJECT: HYDRAULIC POWER - Hydraulic System - Alternating Current Motor Pump Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.
THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED
TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity A. Airplanes This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line number(s) 1-1566, 1568-1571 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP 777-200, 777-200LR, 777-300, 777-300ER and 777F airplanes that could have Eaton Alternating Current Motor Pump (ACMP) P/N 731966 installed.
-1 Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F GroupVariable Number 1WA001 - WA017 1WA076 - WA080 1WA086 - WA093 1WA101 - WA104 GroupVariable Number 1WA116 - WA119 1WA131 - WA137 1WA171 - WA175 1WA196 - WA198 GroupVariable Number 1WA206 - WA212 1WA221 - WA223 1WA231 - WA232 1WA241 - WA250 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 5 of 11
GroupVariable Number 1WA261 - WA266 1WA281 - WA283 1WA301 - WA304 1WB001 - WB021 1WB031 - WB046 1WB051 - WB088 1WB101 - WB106 1WB121 - WB125 1WB131 - WB148 1WB151 - WB155 1WB161 - WB177 1WB181 - WB194 1WB201 - WB215 1WB231 - WB247 1WB271 - WB273 1WB276 - WB286 1WB291 - WB302 1WB306 - WB307 1WB311 - WB337 1WB341 - WB342 1WB366 - WB368 1WB371 - WB388 1WB406 1WB411 - WB413 1WB416 - WB439 1WB446 - WB453 1WB476 1WB481 - WB484 1WB501 - WB512 1WB531 - WB537 1WB551 - WB554 1WB591 - WB597 1WB601 - WB606 GroupVariable Number 1WB611 - WB622 1WB631 - WB638 1WB646 - WB649 1WC051 - WC073 1WC101 - WC104 1WC111 - WC120 1WC221 - WC224 1WC241 - WC243 1WC281 - WC290 1WC301 - WC308 1WC361 - WC364 1WC371 - WC374 1WC381 - WC395 1WC441 1WC446 - WC449 1WC456 - WC459 1WC486 - WC493 1WC506 - WC508 1WC521 - WC522 1WC531 - WC536 1WC546 - WC548 1WC556 1WC566 - WC567 1WC571 - WC574 1WC581 1WC586 - WC587 1WC591 - WC595 1WD001 - WD002 1WD011 - WD018 1WD031 - WD036 1WD046 - WD055 1WD066 - WD075 1WD081 - WD089 GroupVariable Number 1WD091 1WD096 1WD101 - WD106 1WD111 - WD112 1WD116 - WD117 1WD121 - WD122 1WD501 - WD513 1WD521 - WD541 1WD546 - WD554 1WD561 - WD573 1WD581 - WD599 1WD606 - WD609 1WD621 - WD632 1WD651 - WD665 1WD671 - WD677 1WD691 - WD709 1WD741 - WD752 1WD761 - WD771 1WD786 - WD788 1WD796 - WD837 1WD846 - WD867 1WD871 - WD918 1WD921 - WD957 1WD966 - WD970 1WD981 - WD982 1WD986 - WD987 1WD991 - WD996 1WE001 - WE007 1WE011 - WE012 1WE021 - WE026 1WE031 - WE040 1WE051 - WE057 1WE071 - WE078 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 6 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
GroupVariable Number 1WE081 - WE084 1WE091 - WE095 1WE126 - WE178 1WE186 - WE219 1WE226 - WE231 1WE236 - WE253 1WE261 - WE267 1WE271 - WE278 1WE291 - WE298 1WE301 - WE320 1WE331 - WE347 1WE351 - WE356 1WE366 - WE368 1WE376 - WE377 1WE381 1WE386 - WE387 1WE391 - WE392 1WE396 - WE405 1WE416 - WE420 1WE426 - WE431 1WE436 - WE446 1WE451 - WE482 1WE486 - WE493 1WE495 - WE499 GroupVariable Number 1WE501 - WE504 1WE511 - WE516 1WE526 - WE528 1WE536 - WE549 1WE556 - WE571 1WE576 - WE585 1WE591 1WE601 - WE605 1WE626 - WE627 1WE631 1WE641 - WE642 1WE646 - WE647 1WE651 - WE661 1WE666 - WE677 1WE681 - WE687 1WE701 - WE705 1WE711 - WE712 1WE731 - WE732 1WE736 - WE740 1WE746 - WE767 1WE776 - WE786 1WE791 - WE792 1WE796 - WE798 1WE811 - WE812 GroupVariable Number 1WE826 - WE828 1WE831 - WE835 1WE851 - WE853 1WF001 - WF004 1WF016 - WF027 1WF031 - WF043 1WF046 - WF073 1WF075 - WF077 1WF081 - WF088 1WF096 - WF101 1WF106 - WF109 1WF111 - WF124 1WF131 - WF144 1WF146 - WF147 1WF151 - WF152 1WF156 - WF160 1WF166 - WF173 1WF176 - WF184 1WF191 1WF206 - WF210 1WF216 - WF217 1WF221 - WF223 1WF231 - WF232 -- B. Spares Affected Examine your spares supply for the parts or components identified below. If any parts or components are found, refer to Eaton Aerospace SB 731966-29-02 for the recommended action.
NamePart Number Alternating Current Motor Pump (ACMP)731966 (a)
(a) The existing ACMP can be modified to the new ACMP configuration in accordance with Eaton Aerospace SB 731966-29-02.
2. CONCURRENT REQUIREMENTS None.
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 7 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 777-29A0047 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 777-29A0047 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 1, in accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Table 1: Alternating Current Motor Pump Part Number Inspection Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Within 60 months after the Original Issue date of Requirements Bulletin 777-29A0047 RB.
OPTION 1: Do a maintenance records check for any installed Alternating Current Motor Pumps (ACMP) with part numbers 731966.
All Airplanes -OPTION 2: Do an inspection for any installed ACMP with part numbers 731966.
-Within 60 months after the Original Issue date of Requirements Bulletin 777-29A0047 RB.
Replace any ACMP part number 731966 with ACMP part number 3033115-100 or later approved ACMP part number at the affected location(s).
CONDITION 1: ANY ACMP
WITH PART NUMBER 731966 FOUND --No further action is required.
CONDITION 2: ACMP
WITH PART NUMBER 731966 NOT FOUND
4. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 8 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
5. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual (SRM) Chapter 51 – Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual, Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777 Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777 Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the applicable installation step.
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 9 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
6. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
7. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
8. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.
9. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
10. The instructions in Work Instructions and the figures can include operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools.
11. Use of colors in Figures is based on guidance from the ATA e-Business Program (ATA) iSpec 2200.
12. Later approved parts are only those Boeing parts that are approved as a replacement for the part specified in this bulletin and approved as part of the type design by the FAA after the issuance of this bulletin.
13. A maintenance records check to determine installation of Alternating Current Motor Pump (ACMP) part number 731966 can be done provided the part number can be conclusively determined from that check.
B. WORK INSTRUCTIONS Actions Required For Compliance
1. Requirements:
Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 10 of 11 REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
Table 1: Alternating Current Motor Pump Part Number Inspection Refer to the listed procedures in SB 777-29A0047 Original Issue or later approved revisions as an accepted procedure.
Method of ComplianceActionCondition --OPTION 1: Do a maintenance records check for any installed Alternating Current Motor Pumps (ACMP) with part numbers 731966.
All Airplanes Do PART 1: OPEN ACCESS -OPTION 2: Do an inspection for any installed ACMP with part numbers 731966. FIGURE 1- Do PART 2: ACMP
REPLACEMENT -Replace any ACMP part number 731966 with ACMP part number 3033115-100 or later approved ACMP part number at the affected location(s).
CONDITION 1: ANY ACMP
WITH PART NUMBER 731966 FOUND Do PART 3:
CLOSE ACCESS - Do PART 3:
CLOSE ACCESS -No further action is required.
CONDITION 2: ACMP
WITH PART NUMBER 731966 NOT FOUND Export Controlled ECCN: 9E991 See page 1 for details Original Issue: September 11, 2025 777-29A0047 RB 11 of 11 REQUIREMENTS BULLETIN 777-29A0047