TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b29c94e8fa37c35b6facd571028c72b4028196726e7e1c1a60efb4f8d4a9fee0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b29c94e8fa37c35b6facd571028c72b4028196726e7e1c1a60efb4f8d4a9fee0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 777 Requirements Bulletin
SPECIAL ATTENTION
Number: 777-33-0069 RB Original Issue: October 15, 2024 ATA System: 3320
SUBJECT: LIGHTS - Passenger Compartment Lights - Sidewall Lights Inspection and Change
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
Copyright © 2024 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: October 15, 2024
2.0
777-33-0069 RB 1 of 36
REQUIREMENTS BULLETIN 777-33-0069 2 of 36 See page 1 for details
BLANK PAGE
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
3 of 36 See page 1 for details
REQUIREMENTS BULLETIN 777-33-0069
Table of Contents
1. EFFECTIVITY5
A. Airplanes5
B. Spares Affected7
2. CONCURRENT REQUIREMENTS7
3. COMPLIANCE7
4. APPROVAL8
5. ACCOMPLISHMENT INSTRUCTIONS11
A. General Information11
B. Work Instructions12
FIGURE 1: PASSENGER COMPARTMENT - SIDEWALL LIGHT POWER CONNECTOR WIRE BUNDLE
- INSPECTION17
FIGURE 2: PASSENGER COMPARTMENT - SIDEWALL LIGHT CLIP AND RINGPOST NOT AT
EXPANSION JOINT LOCATIONS - INSTALLATION19
FIGURE 3: PASSENGER COMPARTMENT - SIDEWALL LIGHT CLIP AND RINGPOST AT EXPANSION
JOINT LOCATIONS - INSTALLATION22
FIGURE 4: PASSENGER COMPARTMENT - SIDEWALL LIGHT BRACKET AND RINGPOST -
INSTALLATION [Group 1-4, 6, 8]25
FIGURE 5: PASSENGER COMPARTMENT - SIDEWALL LIGHT BRACKET AND RINGPOST AT STA 554
- INSTALLATION [Group 5]28
FIGURE 6: PASSENGER COMPARTMENT - SIDEWALL LIGHT BRACKET AND RINGPOST -
INSTALLATION [Group 5, 7]31
FIGURE 7: PASSENGER COMPARTMENT - SIDEWALL LIGHT CLIP AND RINGPOST AT STA 478 -
INSTALLATION [Group 7]34
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 4 of 36 See page 1 for details
BLANK PAGE
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
5 of 36 See page 1 for details
Commercial Airplanes 777 Requirements Bulletin
SPECIAL ATTENTION
Number: 777-33-0069 RB Original Issue: October 15, 2024 ATA System: 3320
SUBJECT: LIGHTS - Passenger Compartment Lights - Sidewall Lights Inspection and Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE
THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes This bulletin is applicable to 777-200LR, 777-300ER Airplane(s), line number(s) 654, 662, 677, 688, 725, 739, 741, 747, 757, 775, 1104, 1121, 1124, 1136, 1141, 1148, 1166, 1173, 1179, 1181, 1184-1185, 1187, 1189-1191, 1194, 1196, 1198-1200, 1202, 1205-1206, 1209, 1213-1219, 1222-1224, 1226-1229, 1231-1233, 1237, 1239-1241, 1244-1247, 1250-1251, 1253-1257, 1259-1260, 1262-1263, 1265-1267, 1269-1270, 1273, 1275, 1277, 1279, 1281-1283, 1285-1289, 1291, 1293-1296, 1299-1305, 1307, 1309-1311, 1313-1315, 1317, 1319, 1321-1325, 1327, 1329, 1331-1333, 1335, 1337-1341, 1344-1345, 1347-1353, 1355-1369, 1371-1373, 1375, 1377-1379, 1381, 1383-1384, 1386-1391, 1394-1405, 1407-1409, 1411-1421, 1423-1429, 1431, 1433-1437, 1439, 14 41- 1442, 1444-1446, 1448-1453, 1456-1463, 1465-1471, 1474-1519, 1523, 1525, 1527, 1529-1530, 1533, 1537-1545, 1547-1550, 1552-1556, 1558-1565, 1569, 1572, 1577, 1580, 1586, 1590, 1593, 1595, 1597-1598, 1600, 1602, 1607, 1609, 1613, 1618, 1627, 1630-1631, 1634, 1636-1637, 1639, 1641, 1643, 1648, 1652, 1654, 1667, 1671, 1675, 1678, 1683, 1687, 1690-1691, 1695 in 8 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
GROUP CONFIGURATION DESCRIPTION 1 - 777-200LR and 777-300ER Airplanes that require sidewall lighting wire support inspection and change at up to 20 locations.
2 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change at up to 30 locations.
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 6 of 36 See page 1 for details
Variable Numb er Group WD046 - WD055 3 WD121 - WD123 1 WD895 - WD910 6 WD933 - WD935 4 WE005 - WE007 3 WE056 - WE057 6 WE138 - WE140 8 WE141 - WE144 7 WE147 - WE150 6 WE168 - WE170 4 WE171 - WE175 6 WE178 4 WE245 - WE250 1 WE291 - WE298 5 WE312 - WE320 4 WE337 - WE350 4
Variable Number Group WE366 - WE368 6 WE396 - WE411 6 WE426 - WE427 2 WE428 - WE431 4 WE436 - WE437 2 WE438 - WE440 4 WE441 - WE446 1 WE451 - WE484 4 WE486 - WE493 8 WE495 - WE499 6 WE501 - WE504 4 WE511 - WE516 4 WE526 - WE528 2 WE536 - WE543 8 WE544 - WE549 6 WE560 - WE565 4
Variable Number Group WE576 - WE587 4 WE591 8 WE601 - WE605 1 WE626 - WE627 4 WE641 - WE642 6 WE651 - WE661 4 WE666 - WE677 4 WE681 - WE683 3 WE684 - WE689 4 WE701 - WE705 4 WE711 - WE712 4 WE731 - WE732 6 WE736 - WE740 4 WE746 - WE772 4 WE776 - WE786 4 WE791 - WE792 4
GROUP CONFIGURATION DESCRIPTION 3 - 777-200LR and 777-300ER Airplanes that require sidewall lighting wire support inspection and change at up to 54 locations.
4 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change at up to 61 locations.
5 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change with brackets up to 51 locations.
6 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change with brackets up to 64 locations.
7 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change with brackets up to 62 locations.
8 - 777-300ER Airplanes that require sidewall lighting wire support inspection and change with brackets up to 68 locations.
Airplane Models:
777-200LR, 777-300ER
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 7 of 36 See page 1 for details
B. Spares Affected None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 777-33-0069 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 777-33-0069 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1, in accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB Variable Numb er Group WE801 - WE806 4 WE811 - WE812 4 WE826 - WE828 4
Variable Number Group WE831 - WE835 6 WE851 - WE853 6 WE856 - WE857 6
Variable Number Group WE861 - WE863 8 WE866 - WE868 6 WE871 8
REQUIREMENTS BULLETIN 777-33-0069 8 of 36 See page 1 for details
Table 1: Forward and Aft Sidewall Lights Inspection and Change
Condition Action Boeing Recommended Compliance Time Repeat Interval (Not to Exceed) All Airplanes Do a General Visual Inspection (GVI) of sidewall light part numbers 1J5011-200135- (), 1J5011-200142-() and 1J5011-200156-() for wire chafing damage.
Within 36 months after the Original Issue date of Requirements Bulletin 777-33-0069 RB.
CONDITION 1:
NO WIRE
CHAFING DAM-
AGE FOUND ACTION 1: At locations where sidewall light part numbers 1J5011-200135-(), 1J5011- 200142-() and 1J5011-200156-() are installed aft of STA 550, adjust wire routing and install new wire support clip, ringpost and clamp.
Before further flight. - ACTION 2: At locations where sidewall light part numbers 1J5011-200135-(), 1J5011- 200142-() and 1J5011-200156-() are installed forward of STA 550, adjust wire routing and install new wire support bracket, ringpost and clamp.
- CONDITION 2:
ANY WIRE
CHAFING DAM-
AGE FOUND OPTION 1 (ACTION 1): At affected sidewall light location, repair the wire chafing damage.
Before further flight. - OPTION 2 (ACTION 1): At affected sidewall light location, replace the light with a new or serviceable light. (a) - OPTION 1 (ACTION 2) and OPTION 2 (AC- TION 2): At locations where sidewall light part numbers 1J5011-200135-(), 1J5011- 200142-() and 1J5011-200156-() are installed aft of STA 550, adjust wire routing and install new wire support clip, ringpost and clamp.
- OPTION 1 (ACTION 3) and OPTION 2 (AC- TION 3): At locations where sidewall light part numbers 1J5011-200135-(), 1J5011- 200142-() and 1J5011-200156-() are installed forward of STA 550, adjust wire routing and install new wire support bracket, ringpost and clamp.
-
(a) A serviceable light is defined as a light that needs no visible repairs and functions as intended.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 9 of 36 See page 1 for details
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 10 of
See page 1 for details
BLANK PAGE
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 11 of 36 See page 1 for details
5. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
5. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
7. A General Visual Inspection (GVI) is defined as: A visual examination of an interior or exterior area, installation or assembly to detect obvious damage, failure or irregularity. This level of inspection is made from within touching distance, unless otherwise specified. A mirror may be necessary to enhance visual access to all exposed surfaces in the inspection area. This level of inspection is made under normally available lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may require removal or opening of access panels or doors. Stands, ladders or platforms may be required to gain proximity to the area being checked.
Basic cleaning may be required to ensure appropriate visibility.
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB
REQUIREMENTS BULLETIN 777-33-0069 12 of
See page 1 for details
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program (ATA) iSpec 2200.
10. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures, and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
11. If the length of any fastener specified in this service bulletin does not meet installation standards given in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards given in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements:
Group 1-4, 6, 8:
Table 1: Forward and Aft Sidewall Lights Inspection and Change.
Condition Action Method of Compliance Refer to the listed procedures in SB 777-33- 0069 Original Issue or later approved revisions as an accepted procedure.
All Airplanes Do a General Visual Inspection (GVI) of sidewall light part numbers 1J5011-200135-(), 1J5011-200142- () and 1J5011-200156-() for wire chafing damage.
- PART 1: OPEN ACCESS FIGURE 1 -
Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB