Copy · 777-57A0128_RB_00- part 1 · 48 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-1339, the docket of a proposed AD (Federal Register 2026-03782). Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a8dc7e80a689ad202b251b4a07b8cd09352d33b2c09ca8558a7df570ebd0f576'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 777 Requirements Bulletin ALERT Number: 777-57A0128 RB Original Issue: June 02, 2025 ATA System: 5754 SUBJECT: WINGS - Landing Gear Attach Fittings and Support Beam - Main Landing Gear Support Beam Lower Stabilizer Brace AFT Fitting Inspection and Replacement EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.

9E991ECCN:

Copyright © 2025 The Boeing Company Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: June 02, 2025 777-57A0128 RB 1 of 144

4.0

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 2 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

BLANK PAGE

Table of Contents

1. EFFECTIVITY5

A. Airplanes5

B. Spares Affected8

2. CONCURRENT REQUIREMENTS8

3. COMPLIANCE8

4. APPROVAL31

5. ACCOMPLISHMENT INSTRUCTIONS33

A. General Information33

B. Work Instructions35

FIGURE 1: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING, MLG SUPPORT BEAM AND STABILIZER BRACE - DETAILED INSPECTION (DET) . . 63 FIGURE 3: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

AND MLG SUPPORT BEAM - OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC)

INSPECTION67

FIGURE 4: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- ULTRASONIC (UT) INSPECTION70

FIGURE 9: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 1]73

FIGURE 10: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 2]80

FIGURE 11: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 3]88

FIGURE 12: LEFT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 4]96

FIGURE 13: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING, MLG SUPPORT BEAM AND STABILIZER BRACE - DETAILED INSPECTION (DET) . . 104 FIGURE 15: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

AND MLG SUPPORT BEAM - OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC)

INSPECTION108

FIGURE 16: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- ULTRASONIC (UT) INSPECTION111

FIGURE 21: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 1]114

FIGURE 22: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 2]121

FIGURE 23: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 3]129

FIGURE 24: RIGHT MAIN LANDING GEAR - SUPPORT BEAM LOWER STABILIZER BRACE AFT FITTING

- REPLACEMENT [Group 4]137

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 3 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 4 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

BLANK PAGE

Commercial Airplanes 777 Requirements Bulletin ALERT Number: 777-57A0128 RB Original Issue: June 02, 2025 ATA System: 5754 SUBJECT: WINGS - Landing Gear Attach Fittings and Support Beam - Main Landing Gear Support Beam Lower Stabilizer Brace AFT Fitting Inspection and Replacement

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.

THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED

TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. Effectivity A. Airplanes This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line number(s) 1-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614, 1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650, 1652-1655, 1657-1658, 1660-1667, 1669, 1671, 1673, 1675-1676, 1678-1679, 1681, 1683-1684, 1686-1687, 1689-1715, 1717-1722, 1724-1727, 1729-1736, 1738-1739, 1741-1745, 1747-1780, 1782-1784, 1786-1787, 1789-1793, 1795-1797, 1799-1800, 1802, 1804-1805, 1807, 1809-1810, 1812, 1814-1815, 1817, 1819-1820, 1822, 1824-1825, 1827, 1829-1830, 1832, 1834-1835, 1837-99999 in 4 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.

The Variable Numbers and Group Information for the applicable airplanes is given below.

NOTE: The Variable Number table below includes affected airplanes available as of the issue date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com after the issue date of this bulletin will be shown using the Maintenance Performance Toolbox EFFECTIVITY search function result.

DESCRIPTIONCONFIGURATIONGROUP 777-200 Airplanes with Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting part number 115W1613-1 & 115W1613-2 installed.

-1 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 5 of 144

DESCRIPTIONCONFIGURATIONGROUP 777-200 Airplanes with extended range with Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting part number 115W1613-7 & 115W1613-8 installed.

-2 777-300 Airplanes with Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting part number 115W1613-11 & 115W1613-12 installed.

-3 777-200LR, -300ER, -777F Airplanes with Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting part number 115W1613-17 & 115W1613-18 installed.

-4 Airplane Models:

777-200, 777-200LR, 777-300, 777-300ER, 777F GroupVariable Number 1WA001 - WA017 1WA076 - WA080 1WA086 - WA093 1WA101 - WA104 1WA116 - WA119 1WA131 - WA137 1WA171 - WA175 1WA196 - WA198 1WA206 - WA212 1WA221 - WA223 1WA231 - WA232 1WA241 - WA250 1WA261 - WA266 1WA281 - WA283 1WA301 - WA304 2WB001 - WB021 2WB031 - WB046 2WB051 - WB088 2WB101 - WB106 2WB121 - WB125 GroupVariable Number 2WB131 - WB148 2WB151 - WB155 2WB161 - WB177 2WB181 - WB194 2WB201 - WB215 2WB231 - WB247 2WB271 - WB273 2WB276 - WB286 2WB291 - WB302 2WB306 - WB307 2WB311 - WB337 2WB341 - WB342 2WB366 - WB368 2WB371 - WB388 2WB406 2WB411 - WB413 2WB416 - WB439 2WB446 - WB453 2WB476 2WB481 - WB484 GroupVariable Number 3WB501 - WB512 3WB531 - WB537 3WB551 - WB554 3WB591 - WB597 3WB601 - WB606 3WB611 - WB622 3WB631 - WB638 3WB646 - WB649 2WC051 - WC073 2WC101 - WC104 2WC111 - WC120 2WC221 - WC224 2WC241 - WC243 2WC281 - WC290 2WC301 - WC308 2WC361 - WC364 2WC371 - WC374 2WC381 - WC395 2WC441 2WC446 - WC449 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 6 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

GroupVariable Number 2WC456 - WC459 2WC486 - WC493 2WC506 - WC508 2WC521 - WC522 2WC531 - WC536 2WC546 - WC548 2WC556 2WC566 - WC567 2WC571 - WC574 2WC581 2WC586 - WC587 2WC591 - WC595 4WD001 - WD002 4WD011 - WD018 4WD031 - WD036 4WD046 - WD055 4WD066 - WD075 4WD081 - WD089 4WD091 4WD096 4WD101 - WD106 4WD111 - WD112 4WD116 - WD117 4WD121 - WD123 4WD156 4WD501 - WD513 4WD521 - WD541 4WD546 - WD554 4WD561 - WD573 4WD581 - WD599 4WD606 - WD609 4WD621 - WD632 4WD651 - WD665 GroupVariable Number 4WD671 - WD677 4WD691 - WD709 4WD741 - WD752 4WD761 - WD771 4WD786 - WD788 4WD796 - WD837 4WD846 - WD867 4WD871 - WD918 4WD921 - WD957 4WD966 - WD970 4WD981 - WD982 4WD986 - WD987 4WD991 - WD996 4WE001 - WE007 4WE011 - WE012 4WE021 - WE026 4WE031 - WE040 4WE051 - WE057 4WE071 - WE078 4WE081 - WE084 4WE091 - WE095 4WE126 - WE178 4WE186 - WE219 4WE226 - WE231 4WE236 - WE253 4WE261 - WE267 4WE271 - WE278 4WE291 - WE298 4WE301 - WE320 4WE331 - WE356 4WE366 - WE368 4WE376 - WE377 4WE381 GroupVariable Number 4WE386 - WE387 4WE391 - WE392 4WE396 - WE411 4WE416 - WE420 4WE426 - WE431 4WE436 - WE446 4WE451 - WE484 4WE486 - WE493 4WE495 - WE499 4WE501 - WE504 4WE511 - WE516 4WE526 - WE528 4WE536 - WE549 4WE556 - WE573 4WE576 - WE587 4WE591 4WE601 - WE605 4WE626 - WE627 4WE631 4WE641 - WE642 4WE646 - WE647 4WE651 - WE661 4WE666 - WE677 4WE681 - WE689 4WE701 - WE705 4WE711 - WE712 4WE731 - WE732 4WE736 - WE740 4WE746 - WE772 4WE776 - WE786 4WE791 - WE792 4WE796 - WE798 4WE801 - WE806 Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 7 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

GroupVariable Number 4WE811 - WE812 4WE826 - WE828 4WE831 - WE835 4WE851 - WE853 4WE856 - WE857 4WE861 - WE863 4WE866 - WE868 4WE871 4WF001 - WF004 4WF016 - WF043 4WF046 - WF077 4WF081 - WF088 4WF096 - WF101 4WF106 - WF109 4WF111 - WF124 4WF131 - WF144 4WF146 - WF147 GroupVariable Number 4WF151 - WF152 4WF156 - WF173 4WF176 - WF184 4WF191 4WF201 4WF206 - WF217 4WF221 - WF229 4WF231 - WF251 4WF256 - WF262 4WF266 - WF288 4WF296 - WF298 4WF301 - WF323 4WF326 - WF330 4WF336 - WF350 4WF356 - WF359 4WF366 - WF377 4WF381 - WF390 GroupVariable Number 4WF396 - WF399 4WF401 - WF404 4WF411 - WF412 4WF416 - WF417 4WF421 4WF426 - WF427 4WF431 - WF434 4WF441 - WF442 4WF446 - WF449 4WF456 4WF461 - WF462 4WF471 - WF472 4WF482 - WF483 4WF486 - WF487 4WF491 -- -- B. Spares Affected None.

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 777-57A0128 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 777-57A0128 RB mandatory.

Accomplish the required actions, based on the applicable conditions in Tables 1 through 6, in accordance with Accomplishment Instructions.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 8 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Table 1: Left Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting Inspections and Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Within 1,600 flight cycles after the Original Issue date of Requirements Bulletin 777- 57A0128 RB.

Before 16,000 total flight cycles or 90,000 total flight hours, whichever occurs first.

OPTION 1 (ACTION 1): Do a Detailed Inspection (DET) of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) All Airplanes with less than 25,000 total flight cycles and less than 90,000 total flight hours as of the Original Issue date of Requirements Bulletin 777-57A0128 RB.

OPTION 1 (ACTION 2): Do an open hole High Frequency Eddy Current (HFEC) inspection of the upper and lower flanges of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting and MLG Support Beam for any crack.

-Within 1,600 flight cycles after the Original Issue date of Requirements Bulletin 777- 57A0128 RB.

Before 16,000 total flight cycles or 90,000 total flight hours, whichever occurs first.

OPTION 2 (ACTION 1): Do a DET of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) OPTION 2 (ACTION 2): Do an Ultrasonic (UT) inspection of the upper and lower flange surfaces of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 9 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Table 1: Left Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting Inspections and Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition 5,000 flight cycles or 20,000 flight hours, whichever occurs first. (b) -CONDITION 1 OPTION 1 (ACTION 1): Repeat the DET of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) CONDITION 1: NO

CRACK FOUND AND

NO DAMAGE FOUND

AS A RESULT OF OP- TION 1 INSPECTIONS.

-CONDITION 1 OPTION 1 (ACTION 2): Repeat the open hole HFEC inspection of the upper and lower flanges of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting and MLG Support Beam for any crack.

-Within 3,000 flight cycles or 10,000 flight hours, whichever occurs first.

CONDITION 1 OPTION 2 (ACTION 1): Repeat the DET of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) -Within 3,000 flight cycles or 10,000 flight hours, whichever occurs first.

CONDITION 1 OPTION 2 (ACTION 2): Do a UT inspection of the upper and lower flange surfaces of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 10 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Table 1: Left Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting Inspections and Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Within 3,000 flight cycles or 10,000 flight hours, whichever occurs first.

CONDITION 2 OPTION 1 (ACTION 1): Repeat the DET of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) CONDITION 2: NO

CRACK FOUND AND

NO DAMAGE FOUND

AS A RESULT OF OP- TION 2 INSPECTIONS.

-Within 3,000 flight cycles or 10,000 flight hours, whichever occurs first.

CONDITION 2 OPTION 1 (ACTION 2): Do an open hole HFEC inspection of the upper and lower flanges of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting and MLG Support Beam for any crack.

3,000 flight cycles or 10,000 flight hours, whichever occurs first.

-CONDITION 2 OPTION 2 (ACTION 1): Repeat the DET of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack and the MLG Support Beam and Lower Stabilizer Brace for any damage. (a) -CONDITION 2 OPTION 2 (ACTION 2): Repeat the UT inspection of the upper and lower flange surfaces of the left MLG Support Beam Lower Stabilizer Brace AFT Fitting for any crack.

-Before further flight.CONDITION 3 (ACTION 1):

Replace left MLG Support Beam Lower Stabilizer Brace AFT Fitting.

CONDITION 3: ANY

CRACK FOUND ON

THE MLG SUPPORT

BEAM LOWER STABI-

LIZER BRACE AFT FIT-

TING AS A RESULT OF OPTION 1 OR OPTION 2 INSPECTIONS.

-At the times specified in Table 3.CONDITION 3 (ACTION 2):

Do the actions specified in Table 3.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 11 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Table 1: Left Main Landing Gear (MLG) Support Beam Lower Stabilizer Brace Aft Fitting Inspections and Replacement Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time (Whichever Occurs Later) ActionCondition -Before further flight.Contact The Boeing Company for repair instructions and do the repair.

CONDITION 4: ANY

CRACK FOUND DUR-

ING OPEN HOLE HFEC

INSPECTION OF THE MLG SUPPORT BEAM.

-Before further flight.Contact The Boeing Company for repair instructions and do the repair.

CONDITION 5: ANY

DAMAGE FOUND ON

THE MLG SUPPORT

BEAM OR ANY DAM-

AGE FOUND ON LOW-

ER STABILIZER

BRACE AS A RESULT OF OPTION 1 OR OP- TION 2 INSPECTIONS.

(a) Damage is defined as any abrasion, dent, scratch, gouge, nick or corrosion in the metallic structure.

(b) If OPTION 2 inspections have been previously accomplished at the same MLG Support Beam Lower Stabilizer Brace AFT Fitting location at any time, the following repeat interval (not to exceed) must be used: 3,000 flight cycles or 10,000 flight hours, whichever occurs first.

Export Controlled ECCN: 9E991 See page 1 for details Original Issue: June 02, 2025 777-57A0128 RB 12 of 144 REQUIREMENTS BULLETIN 777-57A0128

ALERTALERT

Pages 13–24 of 48