Copy · U.S. DOT/FAA - Service Bulletin 707-00A3183-06 · 106 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0756; AD 2015-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b44fc7db2675659669f7dab444875abef80d93cad0a92162e6c609d9917027e9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 49–60

g. Do a surface High Frequency Eddy Current (HFEC) inspection of the front spar support in accordance with FIGURE 8.

(1) If any crack is found in the front spar support, install a new front spar support in accordance with Boeing service bulletin 3366 (707-3366).

h. Apply sealant to the midspar area in accordance with Boeing drawing number 65C13839 Sheet 1.

i. Apply Corrosion Inhibiting Compound (CIC) BMS 3-23, TYPE II, CLASS 2 to the midspar fitting areas. Refer to SOPM 20-43-03 as an accepted procedure.

NOTE: Each operator should evaluate his airplanes environment, the inhibitor used, and the application schedule to ensure adequate corrosion protection. Although Boeing has developed BMS 3-23 as a standard for organic corrosion inhibitors compound and recommends its use, other water displacing corrosion preventive compounds can be satisfactory, based on operator evaluation and experience.

j. Install the nacelle strut # 1 and # 4 to the airplane. Refer to 707 Aircraft Maintenance Manual 54-01-0 as an accepted procedure.

NOTE: On installation of nacelle strut to the airplane, make sure to install new lug shims (if and as required) to reduce lug-to-clevis gap below 0.002 inch.

k. Install the engine # 1 and # 4 to the airplane. Refer to 707 Aircraft Maintenance Manual 71-5-0 as an accepted procedure.

l. Put the airplane back to a serviceable condition.

6. Part 6 - Overwing Support Fitting - Inspection

a. Do an open hole High Frequency Eddy Current (HFEC) inspection in the two forward most fastener holes common to the inboard side of the nacelle strut overwing support fitting and the wing front spar upper chord for any crack in accordance with FIGURE 11.

(1) If no cracks are found, oversize the holes to remove fatigued metal and install oversize fasteners in accordance with FIGURE 12.

(2) If any crack is found in the two forward most fastener holes common to the inboard side of the nacelle strut overwing support fitting and the wing front spar upper chord, do an open hole HFEC inspection for any crack in the two forward most fastener holes common to the outboard side of the nacelle strut overwing support fitting and the wing front spar upper chord in accordance with FIGURE 12.

(a) If no cracks are found, oversize the holes to remove fatigued metal and install oversize fasteners in accordance with FIGURE 13.

(3) If any crack is found in any of the four fastener holes common to the nacelle strut overwing support fitting and the wing front spar upper chord, contact Boeing for repair instructions and do the repair instructed by Boeing or install a new overwing support fitting in accordance with Boeing service bulletin 3173 (707-3173).

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6: February 07, 2014 61 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 62OCROpen in PDF

ALERT Original Issue: June 27, 1975 Revision 6 February 07, 2014 BOEING SERVICE BULLETIN A3183 ALERT THIS FIGURE IS DELETED.

FIGURE 1: THIS FIGURE IS DELETED (SHEET 1 OF 1) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 62 of 106

Page 63OCROpen in PDF

BOEING SERVICE BULLETIN A3183

ALERT ALERT THIS FIGURE IS DELETED.

FIGURE 2: THEET 1 081)S DELETED Devial set an 27, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 63 01 185 Work - See page 1 for details.

Page 64OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE STRUT #4

NACELLE STRUT #3

MIDSPAR FITTING

NACELLE NACELLE STRUT #2 STRUT #1

LUG CRACKS (TYPICAL)

TANG CRACKS (TYPICAL)

UPPER HORIZONTAL TANG

VERTICAL

NACELLE STRUT TANG #2 AND #3 (TYPICAL)

SEE LOWER HORIZONTAL TANG MIDSPAR FITTING 2119126 FWD • (TYPICAL) FIGURE 3: NACELLE STRUT # 2 AND # 3 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 1 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 64 of 106

Page 65OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT LUG _ BUSHING 134

UPPER HORIZONTAL TANG

- VERTICAL TANG

LOWER HORIZONTAL TANG

MIDSPAR FITTING (TYPICAL)

INSPECTION AREA 2119130 FIGURE 3: NACELLE STRUT # 2 AND # 3 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 2 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details. 65 of 106

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a) (b)--SealantRemove1

(c)--SealantRemove2

(d)2-Midspar FittingClean

(e)2-Midspar FittingInspect3

(f)2-Midspar FittingInspect4

(a) Remove sealant from the area around the bushing lug bores of the inboard and outboard midspar fittings.

Use tools made from plastic or hardwood material. Do not use metal tools.

(b) Bushing removal is not required.

(c) Remove all surface sealant from the areas covering the inboard and outboard midspar fitting. Refer to SOPM 20-50-19 as an accepted procedure. Make sure all the surface areas of the midspar fitting are clearly visible before inspection.

(d) Clean all areas of the inboard and outboard midspar fittings. Refer to 707 Maintenance Manual Subject 12-3-1 or SOPM 20-30-03 as an accepted procedure.

(e) Do a detailed inspection of the inboard and outboard midspar fittings for any crack.

(f) Do a surface High Frequency Eddy Current (HFEC) inspection of the inboard and outboard midspar fittings for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 13 or Figure 24.

FIGURE 3: NACELLE STRUT # 2 AND # 3 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 66 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 67OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE STRUT #4

NACELLE STRUT #3

NACELLE NACELLE STRUT #1 STRUT #2

NACELLE STRUT

MIDSPAR CHORD

MIDSPAR

FITTING FWD NACELLE STRUT #2 FWD TORQUE BULKHEAD AND #3 (TYPICAL) 2120049 FIGURE 4: NACELLE STRUT # 2 AND # 3 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 1 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 PROPRIETARY - Copyright ® Unpublished Export Controlled ECCN: 9E991 - BOEING A3183 Work - See page 1 for details. 67 of 106

Page 68OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT WEB

• • FWD

MIDSPAR MIDSPAR

CHORD - T CHORD

INSPECTION VIEW A-A HOLES

TYPICAL 10 UP TORQUE +

BULKHEAD INSPECTION VIEW B-B 0900212

HOLES TYPICAL FIGURE 4: NACELLE STRUT # 2 AND # 3 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 2 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 68 of 106

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a)--Midspar ChordInspect1

(b)--Torque BulkheadInspect2

(a) Do an open hole High Frequency Eddy Current (HFEC) inspection at all opened holes in the midspar chords for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16, using a 0.03 notch calibration.

(b) Do an open hole High Frequency Eddy Current (HFEC) inspection at all opened holes in the torque bulkhead for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16, using a 0.03 notch calibration.

FIGURE 4: NACELLE STRUT # 2 AND # 3 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 69 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 70OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE STRUT #4

NACELLE STRUT #3 > SEE (A

NACELLE NACELLE STRUT #2 STRUT #1

WING FORWARD

DRAG FITTING NACELLE STRUT #2 AND #3 (TYPICAL) 2119138 FIGURE 5: NACELLE STRUT # 2 AND # 3 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 1 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 70 of 106

Page 71OCROpen in PDF

BOEING SERVICE BULLETIN A3183

ALERT ALERT

LOWER SKIN

DOUBLER

BUSHING

•DRAG FITTING FWD C

VIEW A-A

INBOARD DRAG FITTING (TYPICAL)

FRONT SPAR SUPPORT

DOUBLER

BUSHING -DRAG FITTING FWD <

VIEW B-B OUTBOARD DRAG FITTING 2119438 (TYPICAL) FIGURE 5: NACELLE STRUT # 2 AND # 3 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 2 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 71 of 106

Page 72OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT FSS 417

FRONT SPAR FWD

INSPECTION FRONT SPAR SUPPORT

AREA (TYPICAL) 2119762 FIGURE 5: NACELLE STRUT # 2 AND # 3 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 3 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 72 of 106

Pages 73–84 of 106