Copy · U.S. DOT/FAA - Service Bulletin 707-00A3183-06 · 106 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0756; AD 2015-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b44fc7db2675659669f7dab444875abef80d93cad0a92162e6c609d9917027e9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 61–72

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a) (b)2-BushingRemove1

(b) (c)2-BushingMeasure

(d)2-Drag Fitting HoleClean

(e)2-Drag Fitting HoleInspect2

(f)2-FastenerRemove / Keep3

(e)2-Drag Fitting HoleInspect4

(g)2-Front Spar Support Hole Inspect5

(h)--Front Spar SupportInspect6 -2-FastenerInstall (Kept)7

(i)2-Drag Fitting HoleHone8

(j)2-Drag Fitting HoleMeasure

(k)-TYPE 2, CLASS AChemical Conversion Coating Apply9

(l)-BMS 5-95SealantApply10

(b) (m)2-BushingInstall (New)

(n)2-BushingReam

(a) Remove bushing from the drag fitting attachment hole. Refer to SOPM 20-50-03 as an accepted procedure.

(b) Bushings are operator supplied parts. Refer to APPENDIX C to fabricate bushings.

(c) Measure the Internal Diameter (ID), Outer Diameter (OD), and flange thickness to determine the appropriate replacement bushing.

(d) Clean drag fitting hole. Refer to 707 Maintenance Manual Subject 12-3-1 or SOPM 20-30-03 as an accepted procedure.

(e) Do an open hole High Frequency Eddy Current (HFEC) inspection of the drag fitting attachment hole for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16.

(f) Remove the fasteners common to the drag fitting and front spar support.

(g) Do an open hole High Frequency Eddy Current (HFEC) inspection of the front spar support attachment holes for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16.

(h) Do a surface High Frequency Eddy Current (HFEC) inspection of the front spar support for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 4 or Figure 23 or 707, 720 NDT Part 6, 57-40- 07, Figure 2.

(i) Lightly hone the drag fitting hole as required to restore the surface finish of 63 microinches AA.

FIGURE 5: NACELLE STRUT # 2 AND # 3 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 4 OF 5) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 73 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

More DataQtyIdentificationNameTaskStep

(j) Measure the drag fitting hole to make sure the drag fitting hole is within tolerance. Refer to APPENDIX C for drag fitting hole diameter dimensions. If the drag fitting hole is not within tolerance contact Boeing for repair instructions and do the repair.

(k) Apply chemical conversion coating to the drag fitting hole. Refer to SOPM 20-43-03 as an accepted procedure.

(l) Apply sealant to all mating surfaces of the bushing and drag fitting hole. Refer to SOPM 20-50-19 as an accepted procedure.

(m) Use the shrink fit procedure to install the bushing to the drag fitting attachment hole. Refer to SOPM 20- 50-03 as an accepted procedure.

(n) Ream bushing bore holes to final diameter in accordance with Boeing Engineering Drawing 65C13873.

FIGURE 5: NACELLE STRUT # 2 AND # 3 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 5 OF 5) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 74 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 75OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE NACELLE STRUT #3 STRUT #4

NACELLE STRUT #1

MIDSPAR FITTING

NACELLE STRUT #2

LUG CRACKS (TYPICAL)

TANG CRACKS (TYPICAL)

UPPER HORIZONTAL TANG

• VERTICAL TANG

NACELLE STRUT #1 AND #4 (TYPICAL) LOWER HORIZONTAL TANG SEE FWD • MIDSPAR FITTING (TYPICAL) 2119763 FIGURE 6: NACELLE STRUT # 1 AND # 4 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 1 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3183 Work - See page 1 for details. 75 of 106

Page 76OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT LUG _BUSHING (2Y3Y4

UPPER HORIZONTAL TANG

- VERTICAL TANG

LOWER HORIZONTAL TANG

MIDSPAR FITTING (TYPICAL)

INSPECTION AREA 2119765 FIGURE 6: NACELLE STRUT # 1 AND # 4 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 2 OF 3) Original Issue: June 21, 19/5 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 76 of 106

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a) (b)--SealantRemove1

(c)--SealantRemove2

(d)2-Midspar FittingClean

(e)2-Midspar FittingInspect3

(f)2-Midspar FittingInspect4

(a) Remove sealant from the area around the bushing lug bores of the inboard and outboard midspar fittings.

Use tools made from plastic or hardwood material. Do not use metal tools.

(b) Bushing removal is not required.

(c) Remove all surface sealant from the areas covering the inboard and outboard midspar fitting. Refer to SOPM 20-50-19 as an accepted procedure. Make sure all the surface areas of the midspar fitting are clearly visible before inspection.

(d) Clean all areas of the inboard and outboard midspar fittings. Refer to 707 Maintenance Manual Subject 12-3-1 or SOPM 20-30-03 as an accepted procedure.

(e) Do a detailed inspection of the inboard and outboard midspar fittings for any crack.

(f) Do a surface High Frequency Eddy Current (HFEC) inspection of the inboard and outboard midspar fittings for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 13 or Figure 24.

FIGURE 6: NACELLE STRUT # 1 AND # 4 MIDSPAR FITTING INSPECTION - LIFE LIMIT PROGRAM (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 77 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 78OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE NACELLE STRUT #3 STRUT #4

NACELLE STRUT #1

NACELLE STRUT #2

NACELLE STRUT

MIDSPAR CHORD B

MIDSPAR

FITTING FWD < FWD < TORQUE BULKHEAD NACELLE STRUT #1 AND #4 (TYPICAL) 2120051 FIGURE 7: NACELLE STRUT # 1 AND # 4 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 1 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 78 of 106

Page 79OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT WEB

MIDSPAR - MIDSPAR

CHORD CHORD

- INSPECTION VIEW A-A HOLES

TYPICAL

TORQUE-

BULKHEAD

•••• • 0 SUP

- INSPECTION HOLES VIEW B-B 2120052

TYPICAL FIGURE 7: NACELLE STRUT # 1 AND # 4 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 2 OF 3) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 79 of 106

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a)--Midspar ChordInspect1

(b)--Torque BulkheadInspect2

(a) Do an open hole High Frequency Eddy Current (HFEC) inspection at all opened holes in the midspar chords for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16, using a 0.03 notch calibration.

(b) Do an open hole High Frequency Eddy Current (HFEC) inspection at all opened holes in the torque bulkhead for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16, using a 0.03 notch calibration.

FIGURE 7: NACELLE STRUT # 1 AND # 4 TORQUE BULKHEAD AND MIDSPAR CHORD INSPECTIONS (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 80 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 81OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NACELLE STRUT #4 SEE

NACELLE STRUT #1

NACELLE STRUT #2

NACELLE STRUT #3

WING FORWARD

DRAG FITTING NACELLE STRUT #1 AND #4 (TYPICAL) 2119768 FIGURE 8: NACELLE STRUT # 1 AND # 4 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 1 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details. 81 of 106

Page 82OCROpen in PDF

BOEING SERVICE BULLETIN A3183

ALERT ALERT SHIM

LOWER SKIN

DOUBLER

BUSHING -

DRAG FITTING FWDS

VIEW A-A 1x2)8 X10 INBOARD DRAG FITTING (TYPICAL)

FRONT SPAR SUPPORT

DOUBLER 3451

BUSHING -

DRAG FITTING FWD C

VIEW B-B OUTBOARD DRAG FITTING 2120047 (TYPICAL) FIGURE 8: NACELLE STRUT # 1 AND # 4 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 2 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3183 Work - See page 1 for details. 82 of 106

Page 83OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT FSS 704

FRONT SPAR FWD

FRONT SPAR SUPPORT (TYPICAL)

INSPECTION AREA 2120048 FIGURE 8: NACELLE STRUT # 1 AND # 4 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 3 OF 5) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 83 of 106

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a) (b)2-BushingRemove1

(b) (c)2-BushingMeasure

(d)2-Drag Fitting HoleClean

(e)2-Drag Fitting HoleInspect2

(f)1-FastenerRemove3

(e)1-Drag Fitting HoleInspect4

(g)1-Front Spar Support Hole Inspect5

(h)--Front Spar SupportInspect6 -1-FastenerInstall (Kept)7

(i)2-Drag Fitting HoleHone8

(j)2-Drag Fitting HoleMeasure

(k)-TYPE 2, CLASS AChemical Conversion Coating Apply9

(l)-BMS 5-95SealantApply10

(b) (m)2-BushingInstall (New)

(n)2-BushingReam

(a) Remove bushing from the drag fitting attachment hole. Refer to SOPM 20-50-03 as an accepted procedure.

(b) Bushings are operator supplied parts. Refer to APPENDIX C to fabricate bushings.

(c) Measure the Internal Diameter (ID), Outer Diameter (OD), and flange thickness to determine the appropriate replacement bushing.

(d) Clean drag fitting hole. Refer to 707 Maintenance Manual Subject 12-3-1 or SOPM 20-30-03 as an accepted procedure.

(e) Do an open hole High Frequency Eddy Current (HFEC) inspection of the drag fitting attachment hole for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16.

(f) Remove the fasteners common to the drag fitting and front spar support.

(g) Do an open hole High Frequency Eddy Current (HFEC) inspection of the front spar support attachment holes for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 16.

(h) Do a surface High Frequency Eddy Current (HFEC) inspection of the front spar support for any crack in accordance with 707, 720 NDT Part 6, 51-00-00, Figure 4 or Figure 23 or 707, 720 NDT Part 6, 57-40- 07, Figure 2.

(i) Lightly hone the drag fitting hole as required to restore the surface finish of 63 microinches AA.

FIGURE 8: NACELLE STRUT # 1 AND # 4 DRAG FITTING AND FRONT SPAR SUPPORT INSPECTIONS (SHEET 4 OF 5) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 84 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Pages 85–96 of 106