Copy · U.S. DOT/FAA - Service Bulletin - 707-A3536-00 · 76 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0215; AD 2016-19-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '39a44bdb231341403e999467b9a66bee5ea742b94ba1369d7879242c726f1967'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 25–36

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)169-23438-2Cam Latch 1Inspect1

(a) (c)1143N8060-1Cam Latch 2Inspect2

(a) (c)1143N8027-2Cam Latch 3Inspect3

(a)169-23439-3Cam Latch 4Inspect4

(a)169-23439-4Cam Latch 5Inspect5

(a) (c)1143N8027-1Cam Latch 6Inspect6

(a) (c)1143N8060-2Cam Latch 7Inspect7

(a)169-23438-1Cam Latch 8Inspect8

(b)86-83137-2Latch PinInspect9

(a) Do a detailed inspection of the cam latch for damage, distress or incorrect rigging. Some examples of damage or distress are: broken parts, cracks, deformations, flaking of the chrome plating, wear of the chrome plating down to the base material, corrosion, chips, gouges etc.

(b) Do a detailed inspection of the latch pin for signs of damage, distress or incorrect rigging. Some examples are: broken parts, cracks, deformations, flaking of the chrome plating, wear of the chrome plating down to the base material, corrosion, chips, gouges etc

(c) Cam Latches 2, 3, 6 and 7 are not chromed, therefore chrome flaking and chrome wear through cannot be assessed at these locations. Check for excessive wear.

FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION (SHEET 3 OF 3)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 37 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 38OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT

MAIN CARGO DOORWAY

LOWER SILL

LATCH PIN FITTING

ASSEMBL (8 LOCATIONS)

LATCH PIN FITTING ASSEMBLY O BOLT (SHOWN WITH OPTIONAL CLIP

ASSEMBLY INSTALLED) 2089730 FIGURE 2: MAIN CARGO DOOR - LATCH PIN CROSS BOLT TORQUE MEASUREMENT (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 38 of 76

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)8-BoltTorque1

(a) Make sure the cross bolt is capable of reacting a 15 pound-inch, +/- 1 pound-inch, torque from the head side of the bolt and also the nut side if no nutplate is used. The 15 pound-inch, +/- 1 pound-inch, torque value is approximately one-half of the installation torque and is used to give an indication of the integrity of the cross bolt.

FIGURE 2: MAIN CARGO DOOR - LATCH PIN CROSS BOLT TORQUE MEASUREMENT (SHEET 2 OF 2)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 39 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 40OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT

MAIN CARGO DOORWAY

LOWER SILL

LATCH PIN FITTING

ASSEMBLY (8 LOCATIONS)

0.91

0.89

LATCH PIN FITTING ASSEMBLY (SHOWN WITH OPTIONAL CLIP

ASSEMBLY INSTALLED) FIGURE 3: MAIN CARGO DOOR - LATCH PIN EXTENSION MEASUREMENT (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 40 of 76

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep Make sure the latch pin extends out 0.90 inch +/- 0.01 inch from the wear plate.

8-Latch PinMeasure1 FIGURE 3: MAIN CARGO DOOR - LATCH PIN EXTENSION MEASUREMENT (SHEET 2 OF 2)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 41 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 42OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT 120 WD

CAM LATCH

(3) INSPECTION AREA 2089732 FIGURE 4: MAIN CARGO DOOR - CAM LATCH 1 AND CAM LATCH 2 INSPECTION (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 42 of 76

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep -169-23438-2Cam Latch 1Remove / Keep1 -1143N8060-1Cam Latch 2Remove / Keep2

(a) (b) (c) (d)169-23438-2Cam Latch 1Inspect3

(a) (b) (c) (d)1143N8060-1Cam Latch 2Inspect -169-23438-2Cam Latch 1Install (Kept)4 -1143N8060-1Cam Latch 2Install (Kept)5

(a) Do a High Frequency Eddy Current (HFEC) inspection of the cam latch for cracking in accordance with 707 NDT Part 6, 51-00-00 Figure 13 or Figure 24

(b) Use a 0.080 inch diameter or smaller HFEC probe. Set the HFEC instrument to operate between 50 KHz and 75 KHz. If HFEC method indicates a crack, confirm a crack using magnetic particle inspection. Refer to SOPM 20-20-01 as an accepted procedure.

(c) A magnetic particle inspection can be used as an alternative to the HFEC inspection or to confirm crack indications from the HFEC inspections. Refer to SOPM 20-20-01 as an accepted procedure.

(d) If crack indications are found with HFEC and could not be confirmed with magnetic particle inspection, the HFEC crack indication is a non relevant indication due to chrome cracking.

FIGURE 4: MAIN CARGO DOOR - CAM LATCH 1 AND CAM LATCH 2 INSPECTION (SHEET 2 OF 2)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 43 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 44OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT

MAIN CARGO DOORWAY

LOWER SILL

LATCH PIN FITTING

ASSEMBL (8 LOCATIONS) LATCH PIN FITTING ASSEMBLY 13 BOLT (SHOWN WITH OPTIONAL CLIP

ASSEMBLY INSTALLED) 2089734 FIGURE 5: MAIN CARGO DOOR - LATCH PIN CROSS BOLT REPLACEMENT (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 44 of 76

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep -8-BoltRemove1 If installed.8143N8157-2Clip AssemblyRemove / Keep2

(a) (b)8BACB30LM3-24 OR BACB30LM3-22 BoltInstall (New)3

(b)8143N8157-2Clip AssemblyInstall (Kept)

(a) Install with BMS 3-27 corrosion inhibiting compound on faying surfaces.

(b) Installation of 143N8157-2 clip assembly is optional. Use a BACB30LM3-24 bolt if clip assembly is installed.

Use a BACB30LM3-22 bolt if clip assembly is not installed.

FIGURE 5: MAIN CARGO DOOR - LATCH PIN CROSS BOLT REPLACEMENT (SHEET 2 OF 2)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 45 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 46OCROpen in PDF

BOEING SERVICE BULLETIN A3536

ALERT ALERT

MAIN CARGO DOOR

2) CAM LATCH (8 LOCATIONS) LA FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 46 of 76

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep Gusset must be removed to allow removal of cam latch number 4.

--Cam LatchRemove1

(a) (b) (c)--Cam LatchInstall (New)2

(a) Use the original removed cam latch as a pattern/template to locate new cross bolt holes. Match hole angularity from existing cam latch.

(b) Cam latch number 2 and cam latch number 7 only have two cross bolt holes.

(c) There is a possibility the cam latch can be refinished with new chrome plating. Before a cam latch or latch pin can be reused, the operator must provide Boeing with a detailed description of the chrome damage, including size and location, as well as the total number of flights the cam latch or latch pin has been in service. Boeing will use this information to determine if the cam latch or latch pin can be refinished and reused.

FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT (SHEET 2 OF 2)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 47 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 48OCROpen in PDF

BOEING SERVICE BULLETIN A3536

ALERT ALERT

MAIN CARGO DOORWAY

LOWER SILL

LATCH PIN FITTING

ASSEMBLY (8 LOCATIONS) LATCH PIN 1X

LATCH PIN FITTING ASSEMBLY (SHOWN WITH OPTIONAL CLIP

ASSEMBLY INSTALLED) FIGURE 7: MAIN CARGO DOOR - LATCH PIN REPLACEMENT (SHEET 1 OF 2) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 48 of 76

Pages 49–60 of 76