Copy · U.S. DOT/FAA - Service Bulletin - 707-00A3539-00 · 110 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0009; AD 2014-13-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6a0ac8f59b887b835591433a550daf7922c5d99625fd0f99cdd5c4f57cb35267'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 13–24

Group 3:

Table 4 - Scribe Line Inspections on Fuselage Skin at Skin Lap Joints - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition Do Part 1 - Surface Preparation, Part 2 - Detailed Inspection, and the applicable Non- Destructive Testing (NDT) inspection in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6 for the skin lap joint areas that follow:

Airplanes with scribe lines using a Limited Return To Service (LRTS) Program Skin Lap Joints LRTS inspections are not an option for airplanes with more than 20,000 total flight cycles.

Flight CyclesStation Location From - To Stringer Location 1,100-STA NLG - 481S-30R 800-STA 960 - 1124.10S-29R 1,400-STA 1124.10 - 1265.20 1,700-STA 312 - 360S-25R 2,100-STA 360 - 481 2,200-STA 1364.10 - 1440S-24R 1,400-STA 259.50 - 360S-20R 1,400-STA 360 - Door Cutout 1,400-STA 580 - 600K 1,200-STA 960 - Door Cutout 1,200-Door Cutout - STA 1164.10 2,900-STA 1164.10 - Door Cutout 2,900-Door Cutout - STA 1265.20 2,000-STA 360 - Door CutoutS-14R 2,000-Door Cutout - STA 481 3,000-STA 1124.10 - 1164.10 2,000-STA 1241 - Door Cutout 2,400-Door Cutout - STA 1364.10 1,800-STA 1241 - 1384.10S-10R 1,900-STA 441 - 580S-6R 3,000-STA 441 - 481S-6L 2,000-STA 360 - 481S-14L 2,000-STA 1220 - Door Cutout 1,400-STA 259.50 - 360S-20L Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 25 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 3:

Table 4 - Scribe Line Inspections on Fuselage Skin at Skin Lap Joints - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition STA 360 - 441 1,400 - 2,000-STA 441 - 600H 1,300-STA 960 - 1164.10 2,900-STA 1164.10 - 1265.20 1,700-STA 312 - 360S-25L 2,000-STA 441 - 481 800-STA 960 - 1124.10S-29L 1,400-STA 1124.10 - 1265.20 -Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If no crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Or Repeat at intervals defined above in this table.

-Repeat the LRTS program in accordance with this service bulletin.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If any crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before 20,000 total flight cycles.

Contact Boeing for additional inspections or repair in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the additional inspections or repair.

Airplanes with scribe lines using a LRTS Program Inspection.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 26 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 4:

Table 5 - Scribe Line Inspections on Fuselage Skin at Skin Lap Joints - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition Do Part 1 - Surface Preparation, Part 2 - Detailed Inspection, and the applicable Non- Destructive Testing (NDT) inspection in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6 for the skin lap joint areas that follow:

Airplanes with scribe lines using a Limited Return To Service (LRTS) Program Skin Lap Joints LRTS inspections are not an option for airplanes with more than 20,000 total flight cycles.

Flight CyclesStation Location From - To Stringer Location 1,100-STA NLG - 481S-30R 800-STA 960 - 1124.10S-29R 1,400-STA 1124.10 - 1265.20 1,700-STA 312 - 360S-25R 2,100-STA 360 - 481 2,200-STA 1364.10 - 1440S-24R 1,400-STA 259.50 - 360S-20R 1,400-STA 360 - Door Cutout 1,400-STA 580 - 600K 1,200-STA 960 - Door Cutout 1,200-Door Cutout - STA 1164.10 2,900-STA 1164.10 - Door Cutout 2,900-Door Cutout - STA 1265.20 2,000-STA 360 - Door CutoutS-14R 2,000-Door Cutout - STA 481 3,000-STA 1124.10 - 1164.10 2,000-STA 1241 - Door Cutout 2,400-Door Cutout - STA 1364.10 1,800-STA 1241 - 1384.10S-10R 1,900-STA 441 - 580S-6R 3,000-STA 441 - Door CutoutS-6L 2,000-STA 360 - Door CutoutS-14L 2,000-STA 1220 - Door Cutout 1,400-STA 259.50 - 360S-20L Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 27 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 4:

Table 5 - Scribe Line Inspections on Fuselage Skin at Skin Lap Joints - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition STA 360 - 441 1,400 - 2,000-STA 600E - 600H 1,300-STA 960 - 1164.10 2,900-STA 1164.10 - 1265.20 1,700-STA 312 - 360S-25L 2,000-STA 441 - 481 800-STA 960 - 1144.10S-29L 1,400-STA 1144.10 - 1265.20 -Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If no crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Or Repeat at intervals defined above in this table.

-Repeat the LRTS program in accordance with this service bulletin.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If any crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before 20,000 total flight cycles.

Contact Boeing for additional inspections or repair in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the additional inspections or repair.

Airplanes with scribe lines using a LRTS Program Inspection.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 28 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 6 - Scribe Line Inspections on Fuselage Skin at External Approved Repairs - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition Do Part 1 - Surface Preparation, Part 2 - Detailed Inspection, and the applicable Non- Destructive Testing (NDT) inspection in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6 for the External Approved Repair areas that follow:

Airplanes with scribe lines using a Limited Return To Service (LRTS) Program External Approved Repairs LRTS inspections are not an option for airplanes with more than 20,000 total flight cycles.

Flight CyclesStringer Location From - To Station Location From - To 1,200-S30R - S30LSTA 259.50 - STA 1440 External Approved Repairs - 20 inches or longer on any side.

1,500-S30R - S30LSTA 259.50 - STA 1440 External Approved Repairs - Less than 20 inches on any side.

-Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If no crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Or Repeat at intervals defined above in this table.

-Repeat the LRTS program in accordance with this service bulletin.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the repair.

If any crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 29 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 6 - Scribe Line Inspections on Fuselage Skin at External Approved Repairs - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before 20,000 total flight cycles.

Contact Boeing for additional inspections or repair in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the additional inspections or repair.

Airplanes with scribe lines using a LRTS Program Inspection.

Group 1-4:

Table 7 - Scribe Line Inspections on Fuselage Skin at External Features - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance Time ActionCondition Do Part 1 - Surface Preparation, Part 2 - Detailed Inspection, and the applicable Non-Destructive Testing (NDT) inspection in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6 for the External Feature areas that follow:

Airplanes with scribe lines using a Limited Return To Service (LRTS) Program External Features LRTS inspections are not an option for airplanes with more than 20,000 total flight cycles.

Flight CyclesExternal FeatureStation Location Stringer Location 2,500-Air Traffic Control/ L- Band Antenna STA 294.50 to

312.00 S-25L To S- 25R 1,750-Antenna - Low Range Radio Altimeter STA 1010S-30L To S- 30R 1,750-Antenna - Low Range Radio Altimeter STA 1029S-30L To S- 30R 1,750-Antenna - Low Range Radio Altimeter STA 1050S-30L To S- 30R 1,750-Antenna - Low Range Radio Altimeter STA 1069S-30L To S- 30R Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 30 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 7 - Scribe Line Inspections on Fuselage Skin at External Features - Limited Return To Service Repeat Inspection Intervals Repeat Interval (Not to Exceed) Compliance Time ActionCondition -Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph

3.B.8 - Part 6. Do the repair.

If no crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph 3.B.9 - Part 7.

Or Repeat at intervals defined above in this table.

-Repeat the LRTS program in accordance with this service bulletin.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph 3.B.9 - Part 7.

-Before further flight.

Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph

3.B.8 - Part 6. Do the repair.

If any crack is found.

And -Before further flight.

Do surface finish restoration in accordance with Accomplishment Instructions Paragraph 3.B.9 - Part 7.

-Before 20,000 total flight cycles.

Contact Boeing for additional inspections or repair in accordance with Accomplishment Instructions Paragraph 3.B.8 - Part 6. Do the additional inspections or repair.

Airplanes with scribe lines using a LRTS Program Inspection.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 31 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 8: Known Existing Scribe Line Damage - Inspection for Scribe Lines Outside of Service Bulletin Inspection Areas Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before 20,000 total flight cycles.Do surface preparations in accordance with Accomplishment Instructions Paragraph 3.B.3 - Part 1.

Airplanes with known existing scribe line damage outside of this Service Bulletin Inspection areas. And Measure the scribe line depth in accordance with Accomplishment Instructions Paragraph

3.B.10 - Part 8 for the fuselage areas that follow:

Skin Lap Joints External Approved Repairs External Features (Antennas, Lights, Beacons) Skin Butt Joints Decals and Fairings -Before further flight.No repair or further inspections are required in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8.

Scribe line is found less than 0.001 inch deep.

And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.Do the applicable Non-Destructive Testing (NDT) inspection for any crack in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8.

Scribe line is greater than or equal to 0.001 inch deep And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 32 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 8: Known Existing Scribe Line Damage - Inspection for Scribe Lines Outside of Service Bulletin Inspection Areas Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before further flight.No repair or further inspections are required in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8.

If no crack is found and the scribe line is greater than or equal to 0.001 inch deep and less than or equal to 0.004 inch deep. And -Before further flight.Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before 20,000 total flight cycles.Contact Boeing for additional inspections or repair in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8. Do the additional inspections or repair.

If no crack is found and the scribe line is greater than 0.004 inch deep and less than or equal to 0.006 inch deep.

And -Before further flight.Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8. Do the repair.

If no crack is found and the scribe line is greater than 0.006 inch deep.

And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 33 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 1-4:

Table 8: Known Existing Scribe Line Damage - Inspection for Scribe Lines Outside of Service Bulletin Inspection Areas Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before further flight.Document and propose a repair to Boeing in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8. Do the repair.

If any crack is found.

And Contact Boeing for additional inspections in accordance with Accomplishment Instructions Paragraph 3.B.10 - Part 8. Do the additional inspections.

And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Group 5:

Table 9 : Scribe Line Inspection on Fuselage Skin at Skin Lap Joints, External Approved Repairs, External Features, Skin Butt Joints, and Decals - Initial Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 12 months after the original issue date of this service bulletin.

Do surface preparations for scribe line inspections in accordance with Accomplishment Instructions Paragraph 3.B.3 - Part 1.

Airplanes with more than 15,000 total flight cycles as of the original issue date of this service bulletin.

And Do detailed inspections of all skin lap joints, external approved repairs, external features, skin butt joints, and decals for any scribe line using the table in accordance with Accomplishment Instructions Paragraph 3.B.4 - Part 2.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 34 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 5:

Table 9 : Scribe Line Inspection on Fuselage Skin at Skin Lap Joints, External Approved Repairs, External Features, Skin Butt Joints, and Decals - Initial Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 24 months after the original issue date of this service bulletin or before 15,000 total flight cycles, whichever occurs later.

Do surface preparations for scribe line inspections in accordance with Accomplishment Instructions Paragraph 3.B.3 - Part 1.

Airplanes with 15,000 total flight cycles or less as of the original issue date of this service bulletin.

And Do detailed inspections of all skin lap joints, external approved repairs, external features, skin butt joints, and decals for any scribe line using the table in accordance with Accomplishment Instructions Paragraph 3.B.4 - Part 2.

-Before further flight.No further inspections are required in accordance with Accomplishment Instructions Paragraph 3.B.5 - Part 3.

No scribe line is found.

And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

-Before further flight.Measure the scribe line depth in accordance with Accomplishment Instructions Paragraph

3.B.6 - Part 4.

Any scribe line is found.

-Before further flight.No repair or further inspections are required in accordance with Accomplishment Instructions Paragraph 3.B.6 - Part 4.

Scribe line is found less than 0.001 inch deep.

And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 35 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Group 5:

Table 9 : Scribe Line Inspection on Fuselage Skin at Skin Lap Joints, External Approved Repairs, External Features, Skin Butt Joints, and Decals - Initial Inspection Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Before further flight.Contact Boeing for repair instructions and do the repair in accordance with Accomplishment Instructions Paragraph 3.B.6 - Part 4.

Scribe line is greater than or equal to 0.001 inch deep And Do surface finish restoration in accordance with Accomplishment Instructions Paragraph

3.B.9 - Part 7.

F. Approval The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.

G. Manpower The table below shows an estimate of the task hours necessary to do this inspection for each airplane.

This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:

— Time to adjust to the workplace — Time to schedule the work — Time to examine the work — Time to cure the materials — Time to make the parts — Time to find the tools.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 36 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Pages 37–48 of 110