TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6a0ac8f59b887b835591433a550daf7922c5d99625fd0f99cdd5c4f57cb35267' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6a0ac8f59b887b835591433a550daf7922c5d99625fd0f99cdd5c4f57cb35267' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
1. MATERIAL AND EQUIPMENT
a. Scrapers
(1) AC Tech Scraper, TS 1275-4 (6 inch length) Supplier: Advanced Chemistry & Technology (AC TECH) Address: 7341 Anaconda Avenue, Garden Grove, California 92841, USA Phone: (714) 373-2837 extension 119 or 117 Fax: (714) 373-1913 Attn: Customer Service email: rosie.cruze@actechaero.com NOTE: Handles are also available for these products for better comfort and control. The handle best suited for the TS 1275-4 scraper can be purchased under the part number SHR 0272-T from AC Tech.
(2) SEMCO Scraper: P/N 234350 (6 inch length) Supplier: PPG Aerospace: SEMCO Division Address: PPG Aerospace (ASC-Seattle), 14126 NE 190th Street, Woodinville, Washington 98072, USA Phone: North America (800) 237-6649 (This connects to the closest PPG Aerospace facility in North America. For North America and International contacts visit the web site.)
China (Suzhou) 86 512 6661 5858 Dubai UAE 971 4 883 9666 France 33 0 5 6149 4849 Germany 49 40 742 193 10 Hong Kong 852 2861 0918 South Africa 27 11 608 5656 Singapore 65 861 1119 United Kingdom 44 0 1388 770222 Web Site: www.ppg.com/prc-desoto/main Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 1 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 97 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
email: Cheryl.Chittenden@PPG.com subject=Semco Scrapers (PN-234350)
(3) Jus N Tyme Scrapers: P/N JNT 411B60 (6 inch length), P/N JNT 411B90 (9 inch length -tapered) Supplier: Jus N Tyme Tooling Address: 2167 Green Canyon Road, Fallbrook, California 92028, USA Phone: (760) 723-5985 Fax: (760) 723-5820 Contacts: Cheryl or Bob Hancock Web Site: www.JusNTyme.com email: Bob@JusNTyme.com NOTE: Scraper P/N JNT 411B90 is designed for removing sealant from butt joints with a 1/4 inch or larger gap.
(4) PnJ Scrapers: P/N DFD5019, SCD5019, SFD7519, DAD5013 (5 and 9 inch lengths of varying widths); Plastic handles: P/N SHN0272, SHW0215, SHR0272 Supplier: PnJ Machining, Inc.
Address: 2601 Inter Avenue, Puyallup, Washington 98372, USA Phone: (253) 841-0500 Fax: (253) 840-1695 Contact: Paul Hogeboom Web site: www.pnjmachining.com NOTE: Scraper P/N DAD5013 is designed for removing sealant from butt joints with a 1/8 inch or larger gap.
(5) Elixair Scrapers: P/N 311/03/04, 311/06/06, 311/12/04, 311/12/06, 311/24/04, 311/24/06, 311/38/04, and 311/38/06 (7.5 inch length with handle of varying widths); Skyholder Rubber Handle: P/N 310/1; Skymill Pneumatic Scraper Sharpener: P/N 309/3; Skybag for sharpener:
P/N 309/3B Supplier: Elixair International Limited Address: Roman Hill Business Park, Broadmayne, Dorset DT2 8LY, United Kingdom Phone: 44 0 1305 853019 (within the UK); 44 1305 853019 (within the USA) Fax: 44 0 1305 852060 (within the UK); 44 1305 852060 (within the USA) Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 2 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 98 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Contact: Len McLaughlin Web site: www.elixair.co.uk email: sales@elixair.com or lenmclaughlin@elixair.co.uk NOTE: 1. Scraper P/N 311/03/06 is designed for removing sealant from butt joints with a 3 mm or larger gap.
2. The pneumatic sharpener can be used to sharpen most plastic scrapers.
(6) Custom Components LTD Scraper: P/N 10810 (6 inch length) Supplier: Custom Components LTD Address: Unit 3, Feltrim Business Park, Swords Co., Dublin Ireland Phone: 353 1 8901909 Fax: 353 1 8901907
(7) Bomatic, Inc. Scraper: P/N 1-6390-A (9 inch length - tapered) Supplier: Bomatic, Inc.
Address: 1841 East Acacia Street, Ontario, California 91761, USA Phone: (909) 947 3900 Fax: (909) 947 5969 Contact: Kjeld Hestehave, Cathy Macri Web site: www.bomatic.com NOTE: Scraper P/N 1-6390-A is designed for removing sealant from butt joints with a 1/4 inch or larger gap.
(8) General Tool & Supply Scraper: P/N ST982L-9ACE (9 inch length) Supplier: General Tool & Supply Address: 355 Trek Drive, Tukwila, Washington 98188, USA Phone: (206) 762-1500 Toll Free: (800) 321-3305 Fax: (206) 767-7026 Contact: Dean Zetty Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 3 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 99 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Web site: www.generaltool.com email: dzetty@generaltool.com
b. Power Tools
(1) 3M SR cutter - No. 3, 0.40 inch diameter, P/N 48011-30096-2 NOTE: Any power tool that will accept the 3M SR Cutter and has a maximum speed of 850 RPM (at the cutter) can be used.
c. Solvents
(1) Methyl Ethyl Ketone (MEK), ASTM D740
(2) Methyl Propyl Ketone (MPK), BMS 11-9, Grades 1 and 2
(3) Aliphatic Naptha, TT-N-95, Type I and Type III
(4) Toluene, TT-T-548 or ASTM D362
(5) Isopropyl Alcohol TT-I-736
d. Miscellaneous
(1) Aluminum Oxide abrasive paper, 400 grit or finer
(2) Paper or wipers that meet the requirements of BSM 15-5
2. SEALANT REMOVAL NOTES:
This appendix provides procedures for removing sealant from the exterior pressurized fuselage. Using these procedures will minimize the risk of damaging clad aluminum surfaces during sealant removal.
The main areas of concern are:
a. Lap joints
b. Butt joints (including underlying splice plates)
c. Other areas where sealant is present (i.e. wing to body fairings, windows, access doors, etc.)
Boeing recommends only approved scrapers and tools listed in Paragraph 1 of this appendix be used for removing sealant from the exterior fuselage. Alternately, it is acceptable to use other scrapers provided they meet the requirements of BSS7384 (Method for Evaluating Tool Materials for use on Unpainted Clad Aluminum). Commonly used scraper materials such as Lexan polycarbonate, acrylic (Plexiglas), Micarta fiber reinforced phenolic resins, metal, wood, and other hard plastics have been tested and found to scratch clad aluminum.
Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 4 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 100 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
3. SEALANT REMOVAL PROCESS: LAP JOINT FILLET
a. To remove the lap joint fillet, follow this procedure:
CAUTION: PLEASE NOTE THAT THERE IS A POTENTIAL FOR THE SR CUTTER TO "RUN AWAY" AND CAUSE DAMAGE AT THE LAP JOINT AND SURROUNDING AREA.
ALSO, IF THE CUTTER CONTACTS BARE METAL BENEATH THE SEALANT, THE CLAD ALUMINUM SKIN COULD BE DAMAGED. BEFORE USING THE 3M
SR CUTTER, OPERATORS SHOULD BE TRAINED ON PROPER USAGE OF THIS
TOOL AND SHOULD PRACTICE ON TEST PANELS OR PIECES TO PERFECT THEIR SKILLS IN WORKING WITH THE TOOL.
(1) Remove the majority of the fillet seal at the lap joint using any of the approved scrapers listed in Paragraph 1.a. of this appendix.
As an alternative, the 0.4 inch diameter 3M SR Cutter listed in Paragraph 1.b. of this appendix can be used. To prevent the cutter from damaging the clad aluminum surface, do not remove the sealant to bare metal. There should be a thin layer of sealant remaining on the surface after removing the majority of the sealant with the 3M SR Cutter.
(2) After removing the majority of the sealant with approved scrapers or the 3M SR Cutter, remove the remaining sealant with any of the solvents listed in Paragraph 1.c. of this appendix. An approved scraper (Paragraph 1.a.) or wiper (Paragraph 1.a.) can be used along with the solvent to help with the removal.
4. SEALANT REMOVAL: BUTT JOINTS AND OTHER AREAS WHERE SEALANT IS PRESENT ON
THE EXTERIOR FUSELAGE
a. To remove sealant in butt joints and other areas on the exterior fuselage, follow this procedure:
CAUTION: THE 3M SR CUTTER IS RECOMMENDED FOR REMOVING SEALANT FROM LAP JOINTS, BUT NOT FROM BUTT JOINTS OR OTHER AREAS.
(1) Remove the bulk of the sealant using any of the approved scrapers in Paragraph 1.a. of this appendix. Scrapers designed specifically for removing sealant from butt joints are available
(i.e. PnJ, Elixair, Bomatic, Jus N Tyme). The shape of an approved scraper can be modified to fit a butt joint or other areas, as required. One possible modification is shown below.
Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 5 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 101 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
(2) After removing the majority of the sealant with approved scrapers or the 3M SR Cutter, remove the remaining sealant with any of the solvents listed in Paragraph 1.c. of this appendix. An approved scraper (Paragraph 1.a.) or wiper (Paragraph 1.d.) can be used along with the solvent to help with the removal.
5. SCRAPER MAINTENANCE Scrapers dulled from use can be sharpened with 400 grit or finer aluminum oxide paper. Before using a sharpened scraper, the scraper should be rubbed on paper or cheesecloth (Paragraph 1.d.2.) to remove loose sanding particles. If an alternate method of sharpening is used, such as a metal sharpening wheel (including the Elixair International Limited pneumatic scraper sharpener), rub the scraper on 400 grit or finer aluminum oxide paper after sharpening to remove debris, and then rub the scraper on paper or cheesecloth to remove loose particles.
6. USE OF CHEMICAL STRIPPERS TO ASSIST IN SEALANT REMOVAL FOR SCRIBE LINE
INSPECTION
a. MATERIALS
(1) Cee-Bee E-1058, McGean-Rohco, Incorporated, Atlanta Georgia.
(2) Eldorado PR-5044, Eldorado Chemical Company, Incorporated, San Antonio Texas.
(3) Elixair - Skyrestore (Thick), Elixair International Limited, Dorchester, England.
(4) Naftosolv FN, Chemetall GMBH, Frankfurt, Germany.
(5) Skycleen 2000 Aviation Cleaner, Solutia Incorporated, Saint Louis, Missouri.
(6) Turco 5351, Henkel Corporation, Madison Heights, Michigan.
b. SEALANT REMOVAL Use one of the following methods to remove sealant along lap and butt joints on the exterior fuselage.
Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 6 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 102 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
(1) Method 1 - Mechanical/Chemical Remove sealant fillet with an approved scraper in accordance with Paragraph 1.a., above.
Chemically strip any sealant remaining on the surface as follows:
(a) Mask surrounding areas as necessary to prevent contact with chemical strippers. Do not allow chemical strippers to contact substrates other than aluminum. Do not use chemical strippers on reverse lap joints.
NOTE: Chemical strippers will soften and remove paint.
(b) Using a natural bristle brush, apply a thin coating of chemical stripper on the sealant.
CAUTION: CHEMICAL STRIPPER MAY PENETRATE INTO JOINTS IF GAPS ARE PRESENT DUE TO MISSING FAYING SURFACE SEALANT.
1) Do not apply excessive chemical stripper. Stripper should hang and not flow.
2) Let the stripper dwell until the sealant can be easily removed by dry wiping, but do not exceed 40 minutes dwell time.
3) Remove softened sealant with clean dry wipers (BMS 15-5 Class A). Approved scrapers may be used to facilitate removal.
(c) After chemical stripping is complete, remove stripper by thoroughly washing with a water-based alkaline cleaner approved for painted surfaces. Refer to SOPM 20-30-03 as an accepted procedure. Rinse off alkaline cleaner with water.
(2) Method 2 - Chemical/Mechanical/Chemical
(a) Mask surrounding areas as necessary to prevent contact with chemical strippers. Do not allow chemical strippers to contact substrates other than aluminum.
(b) Using a natural bristle brush, apply a thin coating of chemical stripper on the sealant fillet.
(c) Let the chemical stripper dwell for a maximum of 4 hours, except use a maximum dwell time of 2 hours if Turco 5351 is used. A thin coat of stripper may be brushed on every hour as necessary to maintain a wet surface. Do not apply excessive stripper. Stripper should hang and not flow.
(d) Do not apply chemical stripper to areas where the joint is exposed.
(e) Remove softened sealant with an approved scraper and clean dry wipers (BMS 15-5 Class A).
(f) Repeat steps b., c., d., and e. if necessary, but do not apply chemical stripper to areas where the joint is exposed.
(g) If any sealant remains on the surface after removing the sealant fillet, follow the procedure outlined in Method 1.
Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 7 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 103 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
(h) After chemical stripping is complete, remove stripper by thoroughly washing with a water-based alkaline cleaner approved for painted surfaces. Refer to SOPM 20-30-03 as an accepted procedure. Rinse off alkaline cleaner with water.
Appendix A: SEALANT REMOVAL PROCEDURE FOR EXTERIOR PRESSURIZED FUSELAGE SKIN (SHEET 8 OF 8) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 104 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Boeing recommends that operators use the format that follows to report the results of the inspections in this service bulletin to Boeing. Use of this standard format will result in a more rapid review and approval of the data.
A Return to Service Proposal will be provided by Boeing after review of the data.
INTRODUCTION The following is a summary of the work carried out on airplane ___________ as part of a return to service workpack.
Airplane Model:
Airplane Registration:
Airplane Variable Number:
Airplane Line Number:
Airplane Serial Number:
Airplane Total Hours / Flight Cycles:
Airplane Flight Cycles Since Scribe Line Introduction:
BACKGROUND ____________ has completed the following work on airplane ___________:
INSPECTIONS:
The following inspections were completed on airplane ___________:
Detailed Visual Inspections:
Skin Lap Joints:
Fuselage skin lap joints between STA _______ To STA _________ Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- Skin Butt Joints:
Fuselage skin butt joints between STA _______ To STA _________ Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- External Approved Repairs:
Fuselage skin around external approved repairs.
Appendix B: REPORTING TEMPLATE - AIRPLANES WITH SCRIBE LINES (SHEET 1 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 105 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- External Features:
Fuselage skin around external features.
Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- Decals and Fairings:
Fuselage skin around decals and fairings.
Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- Maximum Observed Scribe Line Depth:
The maximum scribe line depth for all locations (skin lap joints, skin butt joints, external approved repairs, external features, and decals and fairings) is ______ inches.
Action:
- NDT Inspections:
All NDT inspections for cracks at scribe line locations have been accomplished in accordance with the Accomplishment Instructions of Service Bulletin 707-A3539.
Findings: (Include a detailed description of any damage found, including locations, message numbers, etc. Attach additional pages as necessary.)
Action:
- - - - - - - Appendix B: REPORTING TEMPLATE - AIRPLANES WITH SCRIBE LINES (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 106 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Table 1 - Skin Lap Joints Depth (inches) Distance From Lap (Inches)Length (inches) Location d_aft (c)d_min
(b) d_fwd
(a) LAft Body Station Forward Body Station Stringer S- S- S- S- S- S-
(a) d_fwd = Distance from the edge of the upper skin of the forward end of the scribe line.
(b) d_min = Minimum distance of the scribe line at any point along the entire length of the scribe line from the edge of the upper skin.
(c) d_aft = Distance from the edge of the upper skin of the aft end of the scribe line.
Appendix C: AIRPLANE FUSELAGE SCRIBE LINE MARK SUMMARY TABLES (SHEET 1 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 107 of 110 BOEING SERVICE BULLETIN A3539
ALERTALERT
Table 2 - Locations other than Skin Lap Joints Depth (inches) Distance From Stringer (Inches) Length (inches) StringerAft Body Station Forward Body Station d_aft (b)d_fwd (a)L S- S- S- S-
(a) d_fwd = Distance of the forward end of the scribe from the stringer.
(b) d_aft = Distance of the aft end of the scribe from the stringer.
Appendix C: AIRPLANE FUSELAGE SCRIBE LINE MARK SUMMARY TABLES (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 26, 2013 A3539 108 of 110 BOEING SERVICE BULLETIN A3539