Copy · SB-707-00A3543-R00-- · 52 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9570; AD 2017-09-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '1ee0b91c7b8b01f6eca20e0fdf364d1913a832123d289bef70747b36e512103c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 13–24

(1) Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at the time given in Paragraph 1.E., Compliance.

b. CONDITION 2: ANY OIL CANNING FOUND.

(1) CONDITION 2 (ACTION 1): Do PART 3: OIL CANNING ZONE DETERMINATION AND DETAILED INSPECTION for any damage or any irregularity.

NOTE: Any damage can include, any sharp creases, any gouges, any crack, any deformation to a radial stiffener, circumferential tear strap, Y-chord or terminal fitting splice plate, or any damaged holes.

Any irregularity can include, any loose or missing fasteners, any pressure leakage, any fasteners within 1.0 inch of any oil canning location or any oil canning location within 2.0 inch inches of any other oil canning location.

(2) CONDITION 2 (ACTION 2): Do PART 4: DETAILED INSPECTION AND EDDY CURRENT INSPECTION for any crack.

(a) CONDITION 2.1: ANY OIL CANNING FOUND WITHIN ZONE 1 LIMITS AND NO CRACK FOUND.

1) OPTION 1 (ACTION 1): Repeat PART 4: DETAILED INSPECTION AND EDDY CURRENT INSPECTION for any crack at the time given in Paragraph 1.E., Compliance.

2) OPTION 1 (ACTION 2): Contact The Boeing Company for repair instructions and do the repair.

3) OPTION 1 (ACTION 3): Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at unrepaired areas at the time given in Paragraph 1.E., Compliance.

4) OPTION 2 (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.

5) OPTION 2 (ACTION 2): Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at unrepaired areas at the time given in Paragraph 1.E., Compliance.

(b) CONDITION 2.2: ANY OIL CANNING FOUND WITH ANY DAMAGE OR ANY IRREGULARITY.

NOTE: Any damage can include, any sharp creases, any gouges, any crack, any deformation to a radial stiffener, circumferential tear strap, Y-chord or terminal fitting splice plate, or any damaged holes.

Any irregularity can include, any loose or missing fasteners, any pressure leakage, any fasteners within 1.0 inch of any oil canning location or any oil canning location within 2.0 inch inches of any other oil canning location.

1) CONDITION 2.2 (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 15, 2016 A3543 25 of 52 BOEING SERVICE BULLETIN A3543

ALERTALERT

2) CONDITION 2.2 (ACTION 2): Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at unrepaired areas at the time given in Paragraph 1.E., Compliance.

(c) CONDITION 2.3: ANY OIL CANNING FOUND WITHIN ZONE 2 LIMITS AND NO CRACK FOUND.

1) CONDITION 2.3 (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.

2) CONDITION 2.3 (ACTION 2): Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at unrepaired areas at the time given in Paragraph 1.E., Compliance.

(d) CONDITION 2.4: ANY OIL CANNING FOUND WITH ANY CRACK FOUND.

1) CONDITION 2.4 (ACTION 1): Do PART 5: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION for crack location, length, and orientation.

2) CONDITION 2.4 (ACTION 2): Contact The Boeing Company for repair instructions and do the repair.

3) CONDITION 2.4 (ACTION 3): Repeat PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB for any oil canning at unrepaired areas at the time given in Paragraph 1.E., Compliance.

3. Do PART 6: CLOSE ACCESS.

4. Put airplane back to a serviceable condition.

PART 1: OPEN ACCESS

1. Get access to the aft side of the STA 1440 aft pressure bulkhead web. Remove and keep stabilizer jackscrew access panel No. 1185. Refer to 707 Airplane Maintenance Manual (AMM) Section 12-02-0 as an accepted procedure.

PART 2: DETAILED INSPECTION OF THE STA 1440 AFT PRESSURE BULKHEAD WEB

1. Do a detailed inspection for any oil canning on the STA 1440 aft pressure bulkhead web in accordance with FIGURE 1.

PART 3: OIL CANNING ZONE DETERMINATION AND DETAILED INSPECTION

1. Determine if oil canning is in Zone 1 or Zone 2 and do a detailed inspection for any damage or any irregularity in accordance with FIGURE 2.

PART 4: DETAILED INSPECTION AND EDDY CURRENT INSPECTION

1. If the oil canning condition is in either the middle or inner bay web sections, do a detailed inspection, surface High Frequency Eddy Current (HFEC) inspection and Low Frequency Eddy Current (LFEC) inspection for any crack in accordance with FIGURE 3.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 15, 2016 A3543 26 of 52 BOEING SERVICE BULLETIN A3543

ALERTALERT

2. If the oil canning condition is in the outer bay web section common to the Y-chord, do the steps that follow:

a. RC Exempt - Get access to the forward side of the STA 1440 aft pressure bulkhead web.

Remove and keep floor panels and either one or both C and D lavatories. Refer to 707 AMM, Section 25-18-0 as an accepted procedure.

b. Do a detailed inspection, surface HFEC inspection and LFEC inspection for any crack in accordance with FIGURE 4.

PART 5: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION

1. Do an HFEC inspection from the forward side of the affected location and find the crack location, length, and orientation in accordance with FIGURE 5.

PART 6: CLOSE ACCESS

1. Install kept floor panels and either one or both C and D lavatories that were previously removed to gain access to the forward side. Refer to 707 AMM Section 25-18-0 as an accepted procedure.

2. Install kept stabilizer jackscrew access panel No. 1185. Refer to 707 AMM Section 12-02-0 as an accepted procedure.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 15, 2016 A3543 27 of 52 BOEING SERVICE BULLETIN A3543

ALERTALERT

Page 28OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT

TYPICAL OIL

CANNING

CIRCUMFERENTIAL

TEAR STRAPS

WEB LAP SPLICE' RADIAL

STIFFENERS

AFT PRESSURE INSPECTION AREA VIEW LOOKING FORWARD BULKHEAD WEB 2506408 A-A FIGURE 1: STA 1440 AFT PRESSURE BULKHEAD WEB - DETAILED INSPECTION (SHEET 1 OF 3) Original Issue: September 15, 2016 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished A3543 Work - See page 1 for details. 28 of 52

Page 29OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT

AFT PRESSURE

BULKHEAD WEB

ORIGINAL

CONTOUR

TYPICAL OIL

CANNING

OIL CANNING (TYPICAL) B-B INSPECTION AREA 2508264 FIGURE 1: STA 1440 AFT PRESSURE BULKHEAD WEB - DETAILED INSPECTION (SHEET 2 OF 3) Original Issue: September 15, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3543 Work - See page 1 for details. 29 of 52

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

More DataQtyIdentificationNameTaskStep

(a) (b) (c) (d)1STA 1440Aft Pressure Bulkhead Web Inspect1

(a) Do a detailed inspection for any oil canning on the STA 1440 aft pressure bulkhead web.

(b) When inspecting for oil canning, make sure the airplane is not jacked, cradled, or supported at or aft of the STA 1440 aft pressure bulkhead web.

(c) Use a flashlight held parallel to the STA 1440 aft pressure bulkhead web surface to highlight oil canning.

(d) An oil canning condition is an area on the STA 1440 aft pressure bulkhead web that is visibly displaced forward from initial contour of the STA 1440 aft pressure bulkhead web. Refer to view B-B.

FIGURE 1: STA 1440 AFT PRESSURE BULKHEAD WEB - DETAILED INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 15, 2016 A3543 30 of 52 BOEING SERVICE BULLETIN A3543

ALERTALERT

Page 31OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT

3) SPLICE PLATE

FIN TERMINAL

FITTING

CIRCUMFERENTIAL

TEAR STRAPS

WEB LAP SPLICE RADIAL

STIFFENERS

TYPICAL OIL

CANNING

AFT PRESSURE INSPECTION AREA VIEW LOOKING FORWARD BULKHEAD WEB 2506434 A-A FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 1 OF 7) Original Issue: September 15, 2016 Export Controlled ECCN: 9E991 - BOEING A3543 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 52

Page 32OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT

AFT PRESSURE

BULKHEAD WEB

FLEXIBLE METAL / STRIP

OUTER EDGE OF

OIL CANNING

ORIGINAL

CONTOUR D = DEPTH OF OIL CANNING

CONCAVE FORWARD W = MEASURED ACROSS

MINIMUM WIDTH OF OIL

CANNING AT PERIMETER WD

OIL CANNING (TYPICAL) B-B 2506753 FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 2 OF 7) Original Issue: September 15, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3543 Work - See page 1 for details. 32 of 52

Page 33OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT

RADIAL STIFFENER D (2) OIL CANNING

CIRCUMFERENTIALS

TEAR STRAP

RADIAL STIFFENER OIL CANNING (2

WEB LAP SPLICE -

TYPICAL OIL

CANNING CENTER

RADIAL STIFFENER / TYPICAL OIL CANNING

OUTER EDGE

ORIGINAL

CONTOUR AFT PRESSURE

1.00- BULKHEAD WEB

TYPICAL OIL

CANNING ZA RADIAL STIFFENER

WEB LAP SPLICE C-C INSPECTION AREA 2508560 FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 3 OF 7) Original Issue: September 15, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3543 Work - See page 1 for details. 33 of 52

Page 34OCROpen in PDF

BOEING SERVICE BULLETIN А3543

ALERT ALERT ORIGINAL 1.00

CONTOUR

CIRCUMFERENTIAL

TEAR STRAP

AFT PRESSURE TYPICAL OIL

BULKHEAD WEB CANNING D-D

INSPECTION AREA

TYPICAL OIL

CANNING OUTER EDGE

ORIGINAL ORIGINAL

CONTOUR CONTOUR

CIRCUMFERENTIAL

2.00 MIN TEAR STRAP

TYPICAL OIL CANNING

E-E AFT PRESSURE

BULKHEAD WEB

INSPECTION AREA FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 4 OF 7) Original Issue: September 15, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3543 Work - See page 1 for details. 34 of 52

FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 5 OF 7) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: September 15, 2016 A3543 35 of 52 BOEING SERVICE BULLETIN A3543

ALERTALERT

Page 36OCROpen in PDF

BOEING SERVICE BULLETIN A3543

ALERT ALERT

0.35 ZONE 2

0.3 D (MAXIMUM DEPTH OF OIL CANNING INCH) ZONE 1

0.05 10 12 14

W (MINIMUM WIDTH OF OIL CANNING AT PERIMETER INCH) ZONE 1 AND ZONE 2 LIMITS TABLE 1 2506768 FIGURE 2: STA 1440 AFT PRESSURE BULKHEAD WEB - OIL CANNING ZONE DETERMINATION AND

DETAILED INSPECTION (SHEET 6 OF 7) Original Issue: September 15, 2016 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3543 Work - See page 1 for details. 36 of 52

Pages 37–48 of 52