On this page
Also cited in 1 proposed AD.
Text · 20Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0518, the docket of a proposed AD (Federal Register 2019-14901, 2020-06503). Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '04354060f345d8cda274a86717e4c3e6406afdb32e6f85477491d9b96e5c6512' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '04354060f345d8cda274a86717e4c3e6406afdb32e6f85477491d9b96e5c6512' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Requirements Bulletin B787-81205-SB250176-00 RB EQUIPMENT AND FURNISHINGS - Passenger Compartment Panel and Lining - Passenger and Service Door Assist Handle Inspection Copyright © 2019 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
ECCN: 9E991 B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 1 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
2.0 B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected3
B. CONCURRENT REQUIREMENTS3
C. COMPLIANCE3
D. APPROVAL4
E. ACCOMPLISHMENT INSTRUCTIONS5
1. General Information5
2. Work Instructions6
TASK 1 – MAIN PASSENGER COMPARTMENT - PASSENGER AND SERVICE DOOR ASSIST HANDLES
- INSPECTION [Group 1]9
TASK 2 – MAIN PASSENGER COMPARTMENT - DOORWAY LININGS - DOORWAY SUPPORT ASSEMBLY
REPLACEMENT [Group 1]15
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 2 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This service bulletin is applicable to 787-8 and 787-9 Airplanes, line numbers 1-527, 529-547, 549- 564, 566-607, 609-618 and 621 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
2. Spares Affected None.
B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB250176-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB250176-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Accomplish the required action(s), based on the applicable condition(s) in Table 4, in accordance with the Accomplishment Instructions.
Table 4 PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 24 months after the Issue 001 date of Requirements Bulletin B787-81205- SB250176-00 RB.
Do a Detailed Inspection of all passenger and service door assist handles for correct installation.
All Airplanes B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 3 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Table 4 PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION Repeat Interval (Not to Exceed) Compliance TimeActionCondition --No further action required.CONDITION 1: DOOR
ASSIST HANDLE IS IN- STALLED CORRECTLY.
-Before further flight.
ACTION 1: Re-install the door assist handle.
CONDITION 2: ANY
DOOR ASSIST HANDLE
NOT INSTALLED COR- RECTLY. ACTION 2: Do a DetailedInspection for correct installation.
--No further action required.CONDITION 2.1: DOOR
ASSIST HANDLE IS IN- STALLED CORRECTLY.
-Before further flight.
Replace the doorway support assembly.
CONDITION 2.2: DOOR
ASSIST HANDLE IS NOT INSTALLED CORRECTLY.
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 4 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
7. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. This could include tactile assessment in which a component or assembly can be checked for tightness/security. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures may be required.
8. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
9. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 5 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
11. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any tasks identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified tasks. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified tasks, can still be done as specified, and the airplane can be put back in an airworthy condition. Tasks not required for compliance are omitted from the RB.
12. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements Table 1 PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION Refer to the listed procedures in B787-81205- SB250176-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS DOOR -Do a Detailed Inspection of all passenger and service door assist handles for correct installation.
All Airplanes -Task 1 PART 3: CLOSE ACCESS DOOR -No further action required.CONDITION 1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY PART 2: DOOR ASSIST
HANDLE INSTALLATION -ACTION 1: Re-install the door assist handle.
CONDITION 2: ANY
DOOR ASSIST HANDLE
NOT INSTALLED COR- RECTLY -Task 1ACTION 2: Do a DetailedInspection for correct installation.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 6 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Table 1 PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION Refer to the listed procedures in B787-81205- SB250176-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 3: CLOSE ACCESS DOOR -No further action required.CONDITION 2.1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY -Task 2Replace the doorway support assembly.
CONDITION 2.2: DOOR
ASSIST HANDLE IS NOT INSTALLED CORRECTLY PART 3: CLOSE ACCESSDOOR- B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 7 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Task 1 – MAIN PASSENGER COMPARTMENT - PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION [Group 1:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 8 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Q BOEING B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN Procedure This Task applies only to: Group 1.
PASSENGER ENTRY DOOR (TYPICAL) ICN-B787-A-000061-A-81205-14895-A-01-1 B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 9 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
OBOEING B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN —SPRING CLIP
TYPICAL B ICN-B787-A-000061-A-81205-14896-A-01-1 Figure 2 B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 10 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
BOEING B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
SPRING CLIP
AGAINST DOOR
- STRUCTURE
SPRING CLIP NOT
AGAINST DOOR
STRUCTURE
INCORRECT INSTALLATION 2845087 ICN-B787-A-000061-A-81205-14897-A-01-1 Figure 3 B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 11 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
OBOEING B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
NO GAP VISIBLE GAP VISIBLE
CORRECT INSTALLATION INCORRECT INSTALLATION 2845131 ICN-B787-A-000061-A-81205-14898-A-01-1 Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for this task.
B787-81205-SB250176-00 RB Issue 001, 06 Mar 2019 Page 12 of 20 EXPORT CONTROLLED ECCN: 9E991 See title page for details.